HS 960720 Parts
Quick Answer: Parts for slide fasteners and parts for zip fasteners enter the UK duty-free, the EU at rates up to 7.70% ad valorem, and the US at rates ranging from free to 66% ad valorem. This classification specifically covers components used in the manufacture or repair of slide fasteners, commonly known as zippers. Importers should be aware of the significant duty rate disparities between major trading blocs, particularly the higher US rates for certain parts. CustomTariffs aggregates this data, highlighting the importance of precise classification to optimize landed costs and ensure compliance. Exporters and customs brokers must verify the specific subheadings and applicable preferential rates for each destination market.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607209000 | 0.00 % | — | — |
| 9607200000 | — | — | — |
| 9607201000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607200000 | — | — | — |
| 9607201000 | 6.70 % | — | — |
| 9607209000 | 7.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607200040 | — | — | ["thousands"] |
| 9607200080 | — | — | ["No."] |
| 96072000 | 11.5% | Free (18 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 9607.20?
Imports of Parts may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 960720 cover?
This subheading covers parts and accessories specifically designed for sliding fasteners, as defined by the World Customs Organization's Harmonized System Nomenclature. According to the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, this includes components such as sliders, stoppers, and pull tabs that are integral to the functioning of sliding fasteners. These parts are intended for use in the assembly or repair of the complete sliding fastener mechanism.
What falls outside HS 960720?
The following products are excluded from HS 960720: complete sliding fasteners, which are classified under HS 960710. Additionally, raw materials used in the manufacture of sliding fastener parts, such as plastic pellets or metal wire, are classified according to their specific material composition. Finished goods incorporating sliding fasteners, like garments or bags, are classified under their respective headings, not as parts of the fastener itself.
What are common classification mistakes for HS 960720?
A common error is misclassifying individual components that are not specifically designed as parts of a sliding fastener. For instance, general-purpose screws or small metal stampings that could be used in various applications, but are not exclusively for sliding fasteners, may be incorrectly entered under this subheading. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial.
How should importers classify products under HS 960720?
The correct procedure for classifying products under HS 960720 involves a thorough examination of the product's intended use and design. Importers and customs brokers must verify that the item is indeed a component or accessory specifically manufactured for sliding fasteners. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing explanatory notes from the WCO is essential for accurate classification.
How is the duty calculated for products under HS 960720?
A shipment of 10,000 plastic sliders for sliding fasteners, declared at a customs value of $500 USD, would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.0% ad valorem, applied to the declared customs value ($500 USD × 0.07 = $35.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 960720?
Several free trade agreements may reduce the applicable duty rate for HS 960720, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The EU's Generalised Scheme of Preferences (GSP) may offer reduced or Free rates for goods from certain developing countries. Documentation required typically includes a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the importing jurisdiction's specific requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 960720 (Parts of slide fasteners)?
The import duty rates for HS code 960720 vary significantly by country. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) rate is 6.70% ad valorem. Under the EU's Combined Nomenclature (CN), the Common Customs Tariff (CCT) rate is 3.5% ad valorem. The UK Global Tariff (UKGT) lists a rate of 7.70% ad valorem. It is crucial to consult the specific tariff schedule of the importing country for the applicable duty rate. Preferential rates under Free Trade Agreements (FTAs) may also apply, potentially reducing or eliminating these duties.
How is the duty for HS code 960720 calculated? Can you provide an example?
The duty for HS code 960720 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the imported parts. For instance, if the United States MFN duty rate of 6.70% applies, and you import parts valued at $10,000 USD, the duty would be calculated as: $10,000 (Value) × 0.0670 (Duty Rate) = $670 USD. Some countries may also apply specific duties based on quantity, but for 960720, ad valorem is most common. Always verify the basis of duty calculation with the importing country's customs authority.
What are the classification criteria for parts of slide fasteners under HS code 960720?
HS code 960720 covers 'Parts' of slide fasteners. This includes components such as sliders (the part that moves up and down the track), pull tabs, stops (top and bottom), and chain elements or tapes that are specifically designed for the assembly of slide fasteners. Items that are not exclusively or principally designed for slide fasteners, or are complete slide fasteners themselves (classified under 9607.10), would not be classified here. The World Customs Organization (WCO) Explanatory Notes provide further guidance on the scope of this heading.
Which trade agreements commonly offer preferential duty rates for HS code 960720?
Several trade agreements can provide preferential duty rates for parts of slide fasteners (HS 960720). For example, the United States has FTAs with countries like Australia (AU), Bahrain (BH), Canada (CA - USMCA), Chile (CL), Colombia (CO), Dominican Republic (DO - CAFTA-DR), Israel (IL), Jordan (JO), Mexico (MX - USMCA), Morocco (MA), Oman (OM), Panama (PA), Peru (PE), and Singapore (SG), which may offer reduced or zero duties if the goods meet the rules of origin. The EU also has numerous preferential agreements, and the UK has its own set of trade deals. Importers must verify the specific rules of origin and eligibility for each agreement to claim preferential treatment.
What documentation is typically required when importing parts of slide fasteners under HS code 960720?
Standard documentation for importing parts of slide fasteners (HS 960720) includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the importing country and any claimed preferential treatment, a Certificate of Origin may be required to prove the goods' origin and qualify for reduced duties under a Free Trade Agreement. Customs declarations must accurately state the HS code and value. It is advisable for importers and customs brokers to consult the specific import regulations of the destination country and the requirements of any applicable Free Trade Agreement.