HS 960711 Slide fasteners
Quick Answer: Slide fasteners imported under HS 960711 enter the UK at 0.00%, the EU at 6.70% ad valorem, and the US at 10% ad valorem, with preferential rates available for certain countries. This HS code specifically covers slide fasteners, commonly known as zippers, whether or not assembled. Importers should be aware of the varying duty rates across major trading blocs. CustomTariffs aggregates this data, highlighting the importance of verifying specific country-specific tariff schedules and any applicable trade agreements for accurate duty assessment and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607110000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607110000 | 6.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9607110000 | 10% | Free (18 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 9607.11?
Imports of Slide fasteners may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 960711 cover?
This subheading covers slide fasteners, also known as zippers, that are assembled. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, these fasteners are composed of two rows of teeth, interdigitated by means of a slider, and are typically used for closing garments, bags, and other flexible articles. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm that this classification applies to complete slide fasteners ready for attachment.
What falls outside HS 960711?
The following products are excluded from HS 960711: slide fasteners that are not assembled, such as individual teeth or slider components sold separately, and slide fasteners that are permanently incorporated into a finished article, like a garment. For instance, a zipper already sewn into a jacket would not be classified under this subheading but rather with the garment itself. Similarly, raw materials for producing slide fasteners, such as plastic or metal strips, are classified elsewhere.
What are common classification mistakes for HS 960711?
A common error is misclassifying unassembled components of slide fasteners under this subheading. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. Unassembled slide fastener parts, such as individual zipper teeth or sliders, would typically fall under a more general heading for parts or components, rather than the finished product heading 9607.
How should importers classify products under HS 960711?
The correct procedure for classifying products under HS 960711 involves verifying that the product is a complete, assembled slide fastener. Importers and customs brokers should examine the product's construction to ensure it consists of two interlocking rows of teeth, a slider, and stops. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the EU TARIC, and reviewing the explanatory notes for heading 9607 is crucial for accurate classification.
How is the duty calculated for products under HS 960711?
A shipment of 1,000 assembled plastic zippers, declared at a customs value of $200 USD, would attract a US duty of $10.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($200 USD × 0.05 = $10.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule, specifically for subheading 9607.11.00.
Which trade agreements reduce duties for HS 960711?
Several free trade agreements may reduce the applicable duty rate for HS 960711, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for goods from certain developing countries. To claim these preferences, a valid USMCA Certificate of Origin or a GSP Form A, depending on the origin country and agreement, is typically required by customs authorities.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the primary import duty rates for HS code 960711 (Slide fasteners)?
The Most Favored Nation (MFN) duty rate for slide fasteners (HS 960711) in the United States is 6.70% ad valorem. However, preferential duty rates are available for goods originating from countries with which the U.S. has trade agreements. For example, under the U.S.-Australia Free Trade Agreement, the duty rate is Free (0.00%). Importers should consult the Harmonized Tariff Schedule of the United States (HTSUS) via the U.S. International Trade Commission (USITC) website for the most current and specific rates applicable to their country of origin.
How is the import duty for HS code 960711 calculated?
The import duty for HS code 960711 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if slide fasteners are valued at $10,000 USD and the MFN duty rate is 6.70%, the duty would be calculated as: $10,000 (value) × 0.0670 (duty rate) = $670.00 USD. Always ensure accurate valuation and refer to the HTSUS for the precise rate.
What are the classification criteria for slide fasteners under HS code 960711?
HS code 960711 specifically covers slide fasteners that are assembled and fitted with stops. This means the fastener must be complete with its interlocking teeth, slider, and top and bottom stops. Parts of slide fasteners or those not yet assembled would fall under different subheadings. The World Customs Organization (WCO) Harmonized System Explanatory Notes provide detailed guidance on the characteristics that define a slide fastener for classification purposes.
Which trade agreements offer preferential duty rates for HS code 960711 into the United States?
Several trade agreements provide preferential duty rates for slide fasteners (HS 960711) into the United States. These include agreements with countries like Australia (AU), Bahrain (BH), Chile (CL), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Peru (PE), and Singapore (SG), among others, which often grant Free (0.00%) entry. Importers must ensure they have a valid Certificate of Origin to claim these preferential rates. The USITC HTSUS is the definitive source for checking eligibility and specific rates under each agreement.
What documentation is typically required for importing slide fasteners under HS code 960711?
Standard documentation for importing slide fasteners (HS 960711) includes a commercial invoice, packing list, and bill of lading or air waybill. Crucially, to claim preferential duty rates under a Free Trade Agreement, a valid Certificate of Origin is mandatory. Importers and customs brokers should also be prepared to provide product specifications or technical data if requested by Customs and Border Protection (CBP) to verify classification. Adherence to labeling requirements, if any, is also essential.