HS 950631 Golf clubs and other golf equipment
Quick Answer: Golf clubs and other golf equipment imported under HS 950631 enter the UK at 2.00%, the EU at 2.70%, and the US at 4.4% (MFN). This classification specifically covers golf clubs, including drivers, irons, putters, and wedges, as well as other golf equipment such as golf balls and golf bags. Importers should be aware that the US offers preferential duty-free entry for this code from numerous Free Trade Agreement partners, as detailed on the USITC website. CustomTariffs aggregates this information, highlighting the importance of verifying specific origin-based duty rates for cost optimization.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9506310000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9506310000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 9506310000 | 4.4% | Free (18 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 9506.31?
Imports of Golf clubs and other golf equipment may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
How to Classify This HS Code?
What products does HS 950631 cover?
This subheading covers golf clubs and other golf equipment, as defined by the World Customs Organization's Harmonized System (HS) Nomenclature. This includes complete golf clubs, such as drivers, irons, putters, and woods, as well as individual club heads, shafts, and grips. It also encompasses golf balls, tees, and other accessories specifically designed for the sport of golf, as detailed in the explanatory notes of the HS. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database provide further specific guidance on the scope of this classification.
What falls outside HS 950631?
The following products are excluded from HS 950631: general sporting goods not specifically for golf, such as general-purpose bags or clothing, unless they are explicitly designed and marketed as golf equipment. Items like golf course maintenance equipment, golf carts, or golf scorecards not integrated into other equipment are also classified elsewhere. For instance, general sports bags would typically fall under heading 4202, while golf carts are classified under heading 8703.
What are common classification mistakes for HS 950631?
A common error is misclassifying golf accessories that have broader applications. For example, general-purpose gloves might be mistakenly classified under 950631 when they should be classified under heading 4203 if not specifically designed for golf. Another mistake involves classifying custom-made or personalized golf clubs incorrectly; these should still fall under 950631 if they meet the definition of golf clubs, adhering to General Rule of Interpretation (GRI) 1, which states classification shall be determined according to the terms of the headings and any relative section or chapter notes.
How should importers classify products under HS 950631?
The correct procedure for classifying products under HS 950631 involves a systematic approach. Importers and customs brokers must first determine the precise nature and intended use of the product. Consulting the WCO HS Nomenclature, relevant national tariff schedules like the USITC HTS or UK Trade Tariff, and any applicable Explanatory Notes is crucial. If the product is a complete golf club or a component thereof, or a specific golf accessory, it should be classified here. If in doubt, seeking a binding ruling from customs authorities is recommended.
How is the duty calculated for products under HS 950631?
A set of 12 golf irons, weighing approximately 4.5 kg and declared at a customs value of $300 USD, would attract a US duty of $15.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem applied to the declared value ($300 USD × 0.05 = $15.00). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule (HTS) for subheading 9506.31.0000.
Which trade agreements reduce duties for HS 950631?
Several free trade agreements may reduce the applicable duty rate for HS 950631, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duties for eligible goods from developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 950631 (Golf clubs and other golf equipment)?
The Most Favored Nation (MFN) duty rate for HS code 950631 can vary. For example, under the US Harmonized Tariff Schedule, the MFN rate is 2.70% ad valorem. However, preferential rates are available for goods originating from countries with trade agreements. For instance, goods from Australia (AU), Chile (CL), Japan (JP), and Singapore (SG) may be eligible for duty-free importation under specific trade agreements, as indicated by 'Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)'. Always verify the specific country of origin and applicable trade agreement for the most accurate duty rate.
How is the import duty for HS 950631 calculated? Can you provide an example?
The duty for HS code 950631 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For example, if a shipment of golf clubs valued at $10,000 is imported into the US and subject to the MFN duty rate of 2.70%, the import duty would be calculated as: $10,000 (value) × 0.0270 (duty rate) = $270. If the item is subject to a per-unit duty in addition to or instead of ad valorem, that would also need to be factored in. Always consult the specific tariff schedule for the importing country.
What are the classification criteria for goods under HS code 950631?
HS code 950631 specifically covers 'Golf clubs and other golf equipment'. This includes complete golf clubs (drivers, irons, putters, wedges), as well as individual club heads, shafts, and grips. It also extends to other golf equipment such as golf balls, tees, and golf bags. The key criterion is that the equipment must be primarily designed for and used in the sport of golf. Items that are not exclusively or principally for golf, even if usable in golf, may fall under different HS codes.
What documentation is typically required for importing goods under HS code 950631?
When importing golf clubs and equipment under HS code 950631, standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim preferential duty rates under trade agreements (e.g., USMCA, CPTPP), a Certificate of Origin or a declaration of origin compliant with the specific agreement's requirements is mandatory. Importers should also be prepared for potential requests for product specifications or marketing materials to verify classification.
Which major trade agreements might offer preferential duty rates for HS code 950631?
Several trade agreements can provide preferential duty rates for HS code 950631, depending on the importing country. For imports into the United States, agreements like the USMCA (United States-Mexico-Canada Agreement) might offer reduced or zero duties for originating goods. For imports into the European Union, the EU TARIC system would detail preferential rates from countries with which the EU has trade agreements. Similarly, the UK Trade Tariff lists preferential rates for goods from countries with UK trade agreements. Examples of countries often benefiting from preferential rates, as seen in some tariff schedules, include Australia (AU), Chile (CL), Japan (JP), and South Korea (KR), often under specific Free Trade Agreements (FTAs).