HS 851090 Parts
Quick Answer: Parts for electric shavers and hair clippers imported under HS 851090 enter the UK at 2.00%, the EU at 2.20%, and the US at rates ranging from Free to 45%. This code specifically covers components and spare parts for appliances classified under HS 8510, such as blades, motors, and casings for electric razors and hair trimmers. Importers should be aware of the significant duty rate variations across major markets, particularly the higher rates in the US for certain origins. According to CustomTariffs data, understanding these differences is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8510900000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8510900000 | 2.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8510903001 | 4% | Free (17 programs) | ["kg"] |
| 8510901000 | Free | — | ["No."] |
| 8510904000 | 4% | Free (17 programs) | ["kg"] |
| 8510905500 | 4.2% | Free (17 programs) | ["kg"] |
| 851090 | — | — | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8510.90?
Imports of Parts may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 851090 cover?
This subheading covers parts and accessories for electric shavers and hair clippers, as defined by the World Customs Organization (WCO) Harmonized System (HS) Nomenclature. According to the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, this includes components such as blades, cutting heads, motors, batteries, housings, and charging cords specifically designed for use with appliances classified under HS heading 8510. These parts are essential for the functioning or repair of the finished products.
What falls outside HS 851090?
The following products are excluded from HS 851090: complete electric shavers and hair clippers (classified under HS 8510), general electrical components not specific to these appliances (e.g., standard resistors or capacitors), and tools or maintenance items not integral to the operation of the shaver or clipper (e.g., cleaning brushes not supplied with the appliance). For instance, a universal power adapter would not fall under this code, nor would spare parts for other personal care appliances like electric toothbrushes.
What are common classification mistakes for HS 851090?
A common error is classifying a part as a finished product or vice versa, particularly when a component is sold as a replacement kit. Another mistake involves misinterpreting the "parts and accessories" definition, leading to the inclusion of items that are not specifically designed for HS 8510 appliances. For example, a generic plastic casing might be incorrectly classified here if it's not proven to be exclusively for an HS 8510 device, potentially violating General Rule of Interpretation (GRI) 1.
How should importers classify products under HS 851090?
The correct procedure for classifying products under HS 851090 involves a thorough examination of the item's design, function, and intended use. Importers and customs brokers must verify that the part or accessory is specifically manufactured for electric shavers or hair clippers of heading 8510. Consulting the official HS Explanatory Notes, the USITC HTS, or the EU TARIC is crucial. If uncertainty remains, a binding ruling from the customs authority is recommended.
How is the duty calculated for products under HS 851090?
A replacement cutting head for a Philips Norelco electric shaver, weighing 0.05 kg and declared at a customs value of $25.00 USD, would attract a US duty of $1.25. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value: 5.0% × $25.00 = $1.25. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 851090?
Several free trade agreements may reduce the applicable duty rate for HS 851090, including the United States-Mexico-Canada Agreement (USMCA), which can result in a "Free" duty rate for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) also offers preferential rates for originating goods from member countries like Japan. To claim these preferences, a valid USMCA Certificate of Origin or a CPTPP Certificate of Origin is typically required, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 851090 (Parts of electric shavers and hair clippers)?
The Most Favored Nation (MFN) duty rate for HS code 851090 can vary. For instance, under the US tariff schedule, it might be 2.00% ad valorem. However, preferential duty rates are often available for goods imported from countries with trade agreements. Examples of preferential rates include Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG), indicating zero duty under specific trade pacts. It is crucial to consult the latest tariff schedule for the importing country to determine the exact applicable rate based on the origin of the goods.
How is the import duty for HS 851090 calculated, and can you provide an example?
Import duty for HS code 851090 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the imported parts. For example, if the MFN duty rate is 2.00% and you import parts valued at $10,000 USD, the duty would be calculated as: $10,000 (Value) × 0.02 (Duty Rate) = $200 USD. If a specific duty rate (e.g., per unit) also applies, the calculation would involve both components, and the higher amount might be payable. Always verify the specific duty calculation method with the importing country's customs authority.
What documentation is typically required when importing parts classified under HS 851090?
When importing parts under HS code 851090, standard import documentation is usually required. This includes a commercial invoice detailing the value and description of the parts, a packing list specifying the contents of each package, and a bill of lading or air waybill as proof of shipment. Depending on the origin and destination, a certificate of origin may be necessary to claim preferential duty rates under trade agreements. Importers should also be prepared to provide technical specifications or product literature if customs authorities require further clarification on the classification of the parts.
Which common trade agreements offer preferential duty rates for HS code 851090, and how can importers benefit?
Several trade agreements can provide preferential duty rates, often including Free entry, for HS code 851090. For example, agreements like the US-Korea Free Trade Agreement (KORUS), US-Australia Free Trade Agreement, and others with countries like Canada, Mexico, and various Middle Eastern nations (indicated by codes like KR, AU, CO, MA, OM) can reduce or eliminate duties. To benefit, importers must ensure the parts originate from a qualifying country and possess a valid Certificate of Origin. This documentation is critical for customs brokers to claim the preferential treatment at the time of import, leading to significant cost savings.
Are there specific criteria to ensure parts are correctly classified under HS 851090, and what if they are not exclusively for shavers/clippers?
HS code 851090 is specifically for 'Parts' of electric shavers and hair clippers. The classification hinges on whether the component is designed and intended for use in the manufacture or repair of these specific finished products. If a part is general-purpose and could be used in multiple types of electrical appliances, it may be classified elsewhere. For instance, a simple electric motor might be classified under its own heading if not exclusively dedicated to shavers or clippers. Importers must carefully assess the specific function and intended use of each part. If a part is primarily designed for a shaver or clipper, it falls under 851090. If its primary use is elsewhere, or it's a component of a more complex sub-assembly that itself has a different classification, re-evaluation is necessary. Consulting the Explanatory Notes to the Harmonized System and the importing country's customs rulings is advisable for complex cases.