HS 848330 Bearing housings, not incorporating ball or roller bearings; plain shaft bearings
Quick Answer: Bearing housings, not incorporating ball or roller bearings, and plain shaft bearings imported under HS 848330 enter the UK at rates up to 4.00%, the EU at rates up to 5.70%, and the US at rates up to 4.5% or duty-free for certain trade agreements. This classification covers components designed to support rotating shafts where friction is managed through sliding contact rather than rolling elements, such as bushings or journal bearings. Importers should verify specific rates based on material and origin, as trade agreements significantly impact US duty liabilities. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8483303210 | — | — | — |
| 8483303800 | — | — | — |
| 8483303810 | — | — | — |
| 8483303860 | 2.00 % | — | — |
| 8483303899 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8483303899 | 3.40 % | — | — |
| 8483308000 | — | — | — |
| 8483308010 | — | — | — |
| 8483300000 | — | — | — |
| 8483303200 | — | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 848330 | — | — | — |
| 8483304040 | — | — | ["kg"] |
| 84833080 | 4.5% | Free (18 programs) | — |
| 8483308040 | — | — | ["kg"] |
| 8483308065 | — | — | ["No.","kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8483.30?
Imports of Bearing housings, not incorporating ball or roller bearings; plain shaft bearings may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 848330 cover?
This subheading covers bearing housings, which are components designed to contain and support bearings, but specifically excludes those that already incorporate ball or roller bearings. It also includes plain shaft bearings, which rely on a sliding surface rather than rolling elements for friction reduction. According to the World Customs Organization's Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, these items are typically made of metal or plastics and are essential for machinery operation.
What falls outside HS 848330?
The following products are excluded from HS 848330: complete bearing assemblies that include ball or roller bearings (classified under HS 8482), finished shafts (classified under HS 8483.10), and complete machinery or mechanical appliances where the bearing housing is merely a part of a larger assembly. For instance, a housing for a pump that includes the pump's impeller and shaft would likely be classified based on the pump itself, not solely the bearing housing component.
What are common classification mistakes for HS 848330?
A common error is misinterpreting the exclusion of "incorporating ball or roller bearings." Importers may mistakenly classify a housing that has the *potential* to accept a ball or roller bearing but does not yet have it installed as falling under 848330, when it should be classified as part of a complete bearing unit if the bearing is integral to its function. Adherence to General Interpretative Rule 1 and 3 is crucial, focusing on the essential character of the item as presented.
How should importers classify products under HS 848330?
The correct procedure for classifying products under HS 848330 involves a detailed examination of the item's construction and intended function. Importers and customs brokers must ascertain whether the housing is designed to hold a plain bearing or is a standalone housing for a bearing that is not yet incorporated. Consulting the WCO Explanatory Notes and the specific tariff schedule of the importing country, such as the UK Trade Tariff, is essential to confirm that the item meets the criteria of a bearing housing without integrated rolling elements.
How is the duty calculated for products under HS 848330?
A set of 50 cast iron bearing housings, each weighing 2 kg and declared at a customs value of $500 USD, would attract a US duty of $100.00. This is calculated using the USITC Harmonized Tariff Schedule's Most Favored Nation (MFN) rate of 3.5% ad valorem, applied to the declared customs value: 3.5% of $500 USD = $17.50. However, if the duty were based on weight, and assuming a hypothetical rate of $0.10 per kg, the duty would be 100 kg (50 housings x 2 kg/housing) * $0.10/kg = $10.00. For this example, we use the ad valorem rate: $500 USD * 0.035 = $17.50. (Note: This example uses a hypothetical ad valorem rate for illustrative purposes; actual rates vary by country and specific product.)
Which trade agreements reduce duties for HS 848330?
Several free trade agreements may reduce the applicable duty rate for HS 848330, including the United States-Mexico-Canada Agreement (USMCA), which can result in a Free duty rate for originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) also offers preferential rates, potentially Free, for qualifying goods from member countries like Vietnam. To claim these preferences, importers typically require a self-certified origin statement or a specific origin declaration, depending on the agreement and the exporting country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 848330 (bearing housings, not incorporating ball or roller bearings; plain shaft bearings)?
The Most Favored Nation (MFN) duty rate for HS code 848330 can vary by country. For example, under the US Harmonized Tariff Schedule (HTS), the general rate is 2.00% ad valorem. In the European Union, under TARIC, the rate is 4.5% ad valorem. The UK Trade Tariff also lists a rate of 4.5% ad valorem. It is crucial to consult the specific tariff schedule of the importing country for the most accurate and up-to-date duty rate.
How is the import duty for HS 848330 calculated, and can you provide an example?
Import duty for HS code 848330 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if a shipment of plain shaft bearings valued at $10,000 USD is imported into the United States (assuming a 2.00% MFN duty rate), the import duty would be calculated as: $10,000 (Customs Value) × 0.02 (Duty Rate) = $200.00. Always ensure the customs value is correctly determined according to the importing country's valuation rules.
What are the key classification criteria to ensure goods are correctly classified under HS 848330?
To be classified under HS 848330, the goods must be bearing housings that do not incorporate ball or roller bearings, or they must be plain shaft bearings. Plain shaft bearings are components that reduce friction between a moving shaft and a stationary housing by providing a smooth surface for the shaft to rotate or slide upon, without the use of rolling elements. Items that incorporate ball or roller bearings, or are complete assemblies of bearings and housings, would typically fall under other HS codes, such as 8482.
Which trade agreements offer preferential duty rates for HS code 848330, and what are some examples?
Many trade agreements provide preferential duty rates for goods classified under HS 848330. For instance, under the US HTS, preferential rates include Free (A+, AU, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG). This indicates duty-free entry for qualifying goods from countries like Australia (AU), Canada (C), Chile (CL), Mexico (MX), and others, provided they meet the rules of origin stipulated in the respective free trade agreements. Importers must obtain a valid Certificate of Origin to claim these preferential rates. Similarly, other countries' trade agreements will have specific provisions for this HS code.
What documentation is typically required for importing goods under HS code 848330?
Standard import documentation for HS code 848330 generally includes a commercial invoice detailing the goods, quantity, value, and country of origin; a packing list; and a bill of lading or air waybill. If preferential duty rates are being claimed under a trade agreement, a Certificate of Origin or other proof of origin acceptable to the importing country's customs authority is essential. Depending on the importing country and the specific nature of the goods, additional certifications or permits (e.g., related to material safety or compliance) might be required. Always verify the specific documentation requirements with the customs authority of the destination country.