HS 848079 Other
Quick Answer: Other molds for working rubber or plastics imported under HS 848079 enter the UK duty-free, the US at rates ranging from Free to 35% ad valorem, and the EU at 1.70% ad valorem. This residual classification applies to molds for rubber or plastics not specifically covered by other subheadings within 8480.7. Importers should verify the specific tariff line and applicable duty rate for their particular mold in each destination country, as rates can vary significantly. CustomTariffs aggregates this data, highlighting the importance of precise classification to ensure compliance and accurate duty payments.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480790000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480799010 | — | — | ["No."] |
| 848079 | — | — | — |
| 8480791000 | Free | — | ["No."] |
| 84807990 | 3.1% | Free (18 programs) | — |
| 8480799020 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480790000 | 1.70 % | — | — |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8480.79?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 848079 cover?
This subheading covers other moulding boxes for the manufacture of metal castings, other moulding patterns, and other bases for models for moulding, not elsewhere specified or included within Heading 8480. According to the WCO Harmonized System Nomenclature, it encompasses a variety of specialized items used in the casting process that do not fit into the more specific categories of Heading 8480. The USITC Harmonized Tariff Schedule (HTS) and EU TARIC database further clarify that this includes items like flasks for die-casting, or specialized pattern bases for intricate metal parts.
What falls outside HS 848079?
The following products are excluded from HS 848079: moulding boxes for the manufacture of metal castings that are specifically designed for automated casting lines, complete moulding machines, and moulds themselves (which are typically classified under HS 8480.71). For instance, a complete die-casting machine would fall under a different heading, and the actual mould inserts used within such machines are classified separately. Pattern equipment for use with machine tools is also excluded, falling under Chapter 84.
What are common classification mistakes for HS 848079?
A common error is the misclassification of complete moulding machines or the moulds themselves as "other" moulding boxes or bases. General Rule of Interpretation (GRI) 1 of the Harmonized System states that classification shall be determined according to the terms of the headings and any relative section or chapter notes. Importers may incorrectly classify a mould insert as a pattern base, or a simple container for moulding sand as a moulding box when it lacks the specific features intended for metal casting processes.
How should importers classify products under HS 848079?
The correct procedure for classifying products under HS 848079 involves a thorough examination of the product's function and design, comparing it against the descriptions in Heading 8480 and its subheadings. Importers and customs brokers must determine if the item is indeed a moulding box, pattern, or model base for metal casting and if it is not specifically covered by a more precise subheading within 8480. Consulting the official tariff schedules of the importing country, such as the USITC HTS or EU TARIC, is crucial for accurate classification.
How is the duty calculated for products under HS 848079?
A specific die-casting flask weighing 15 kg and declared at a customs value of $500 USD would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7% ad valorem, applied to the declared value: 7% of $500 USD = $35.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 8480.79.0000.
Which trade agreements reduce duties for HS 848079?
Several free trade agreements may reduce the applicable duty rate for HS 848079, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from developing countries, such as India. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 848079 (Other molds for rubber or plastics)?
Import duty rates for HS code 848079 can vary significantly depending on the importing country and any applicable trade agreements. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) rate is often 1.70% ad valorem. However, preferential rates under free trade agreements may be lower or even 0%. Always consult the specific tariff schedule of the importing country for the most accurate and up-to-date rates. For instance, the UK Trade Tariff lists a duty rate of 3.5% ad valorem for goods originating from countries without a preferential trade agreement.
How is the import duty for HS code 848079 calculated, and can you provide an example?
The duty is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if a shipment of molds classified under HS 848079 has a declared customs value of $10,000 and the applicable duty rate is 1.70% (e.g., US MFN rate), the import duty would be calculated as: $10,000 (Value) × 0.0170 (Duty Rate) = $170.00. Some countries might also have specific duties based on weight or other units, but ad valorem is most common for this category.
What are the classification criteria for HS code 848079, and what distinguishes it from other mold classifications?
HS code 848079 falls under the broader heading 8480, which covers molding boxes for metal foundry; molds for metal (other than ingot molds), metal carbides, mineral materials, rubber or plastics; base plates for molds; plugs and sides for molds, etc. Specifically, 848079 is for 'Other' molds for rubber or plastics, meaning it applies to molds for these materials that are not specifically covered by preceding subheadings within 8480 (such as injection molds or compression molds, if separately classified). The key criterion is that the mold must be designed for shaping rubber or plastics, and it is not classifiable under a more specific subheading within Chapter 84.
What documentation is typically required when importing goods under HS code 848079?
Standard import documentation is generally required for goods classified under HS 848079. This typically includes a commercial invoice detailing the value, quantity, and description of the molds; a packing list; a bill of lading or air waybill; and a customs declaration. Depending on the importing country and the origin of the goods, a certificate of origin may be necessary to claim preferential duty rates under trade agreements. It's also advisable to have technical specifications or catalogs for the molds to substantiate their classification if requested by customs authorities.
How do trade agreements, such as USMCA or EU trade deals, affect the duty rates for HS code 848079?
Trade agreements can significantly reduce or eliminate import duties for goods classified under HS 848079 if the goods meet the rules of origin specified in the agreement. For example, if molds originating from a country that is part of a free trade agreement with the importing country (e.g., USMCA for the US, Canada, Mexico; or EU trade deals) qualify under the agreement's rules of origin, they may be eligible for a preferential duty rate, often 0%. Importers must obtain a valid certificate of origin and ensure the goods comply with the specific origin criteria outlined in the relevant trade agreement to benefit from these reduced rates.