HS 848071 Moulds for rubber or plastics
Quick Answer: Moulds for rubber or plastics imported under HS 848071 enter the UK duty-free, the EU at 1.70% ad valorem, and the US duty-free under the MFN rate. This HS code specifically covers moulds designed for the manufacture of rubber or plastics. These are typically used in injection moulding, compression moulding, or blow moulding processes to shape molten materials into finished products. Importers should be aware that while the MFN rates are often duty-free in major markets, specific trade agreements or preferential tariffs might apply, impacting the final duty liability. CustomTariffs aggregates this data, providing a valuable resource for compliance planning.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480710000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480710000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480711000 | Free | — | ["No."] |
| 848071 | — | — | — |
| 8480714000 | Free | — | ["No."] |
| 8480718020 | — | — | ["No."] |
| 8480718060 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8480.71?
Imports of Moulds for rubber or plastics may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 848071 cover?
This subheading covers moulds specifically designed for the manufacture of rubber or plastics. According to the World Customs Organization's Harmonized System Explanatory Notes, these are typically metal (often steel or aluminum) moulds used in injection moulding, compression moulding, blow moulding, and other processes to shape molten or pliable rubber and plastic materials into finished or semi-finished articles. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, encompassing moulds with intricate cavities and cores that define the final product's shape.
What falls outside HS 848071?
The following products are excluded from HS 848071: moulds for other materials such as glass, metal, or ceramics, which are classified under other subheadings of heading 8480. Additionally, moulds that are integral parts of a machine, rather than standalone tooling, may be classified with the machine itself. For instance, a mould that is permanently affixed to a specific plastic extrusion machine and cannot be easily removed would likely not be classified here. Tools for working rubber or plastics, such as cutting dies or punches, are also excluded.
What are common classification mistakes for HS 848071?
A common error is misclassifying moulds based solely on the material they produce, rather than their specific design and intended use for rubber or plastics. For example, a mould for a glass bottle would not fall under 848071. Another mistake can arise from applying General Rule of Interpretation (GRI) 2(a) incorrectly; if a mould is presented unassembled but is clearly intended for use as a complete mould for rubber or plastics, it should be classified as such. Confusion also occurs with moulds for composite materials, which may require careful analysis.
How should importers classify products under HS 848071?
The correct procedure for classifying moulds under HS 848071 involves a detailed examination of the mould's design, material, and intended application. Importers and customs brokers must confirm that the mould is specifically intended for shaping rubber or plastics. Reviewing technical specifications, product brochures, and manufacturer declarations is crucial. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and cross-referencing with the WCO Explanatory Notes will ensure accurate classification and avoid potential delays or penalties.
How is the duty calculated for products under HS 848071?
A custom injection mould for plastic automotive parts weighing 500 kg and declared at a customs value of $15,000 USD would attract a US duty of $1,050.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.00% ad valorem, applied to the declared value ($15,000 USD × 0.07 = $1,050.00). This rate is published in the USITC Harmonized Tariff Schedule. For other jurisdictions, the applicable duty rate and calculation method may differ significantly.
Which trade agreements reduce duties for HS 848071?
Several free trade agreements may reduce the applicable duty rate for HS 848071, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, eligible moulds originating from Canada or Mexico can be imported duty-free. For EU countries, the EU-UK Trade and Cooperation Agreement may offer preferential rates, potentially resulting in Free duty for qualifying goods. Documentation required to claim these preferences typically includes a self-certified origin statement for USMCA, or an EUR.1 movement certificate for EU/UK preferences, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 848071 (Moulds for rubber or plastics)?
The Most Favored Nation (MFN) duty rate for HS code 848071 in the United States is 1.70% ad valorem. However, preferential duty rates may apply under various Free Trade Agreements (FTAs) such as the USMCA (United States-Mexico-Canada Agreement), where the duty could be Free (0.00%). It is crucial to consult the specific tariff schedule of the importing country and the origin of the goods to determine the applicable duty rate. For example, under the EU TARIC system, the rate can vary significantly based on origin, with many third countries facing rates around 3.7% or higher, while preferential agreements can reduce this to Free.
How is the import duty for HS 848071 calculated, and can you provide an example?
The duty for HS code 848071 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if a shipment of moulds for rubber or plastics valued at $10,000 is imported into the US and subject to the MFN duty rate of 1.70%, the import duty would be calculated as: $10,000 (Value) × 0.0170 (Duty Rate) = $170.00. If the goods qualified for a Free Trade Agreement rate (e.g., 0.00%), the duty would be $0.00.
What specific criteria determine if a mould falls under HS code 848071?
HS code 848071 covers moulds specifically designed for use with machinery of heading 8477 (machinery for working rubber or plastics) or for machines of heading 8479 (machines and mechanical appliances having individual functions, not elsewhere specified or included) when used for rubber or plastics. This includes injection moulds, compression moulds, blow moulds, and transfer moulds, provided they are intended for shaping rubber or plastic articles. The key is the intended use and the material being processed. Moulds for other materials like metal or glass would fall under different HS codes.
What documentation is typically required for importing goods classified under HS 848071?
Standard import documentation for HS code 848071 generally includes a commercial invoice detailing the value, quantity, and description of the moulds; a packing list; a bill of lading or air waybill; and a certificate of origin if preferential duty rates are claimed under a trade agreement. Depending on the importing country and the specific nature of the moulds (e.g., if they contain certain materials or are subject to specific regulations), additional certifications or declarations might be necessary. Importers and customs brokers should verify the specific requirements with the customs authority of the destination country.
How do trade agreements like the USMCA impact the duty rates for HS code 848071?
Trade agreements, such as the USMCA, can significantly reduce or eliminate import duties for goods originating from member countries. For HS code 848071, if the moulds are certified as originating from a USMCA member country (e.g., Mexico or Canada) and meet the rules of origin stipulated in the agreement, they may qualify for a Free (0.00%) duty rate upon importation into the United States. This requires a valid Certificate of Origin to be presented to customs. Importers must ensure compliance with the specific rules of origin for the relevant trade agreement to benefit from these preferential rates.