HS 848049 Other
Quick Answer: Other molds for the working of materials, not specified elsewhere in heading 8480, imported under HS 848049 enter the UK duty-free, the EU at 1.70% ad valorem, and the US at 3.1% ad valorem under the MFN rate, though preferential rates may apply. This residual classification captures a variety of molds not fitting into more specific categories within 8480, such as those for plastics or rubber. Importers should verify the precise nature of their molds to ensure correct classification, as misclassification can lead to penalties. CustomTariffs aggregates this information, highlighting the importance of consulting specific national tariff schedules for definitive rates and any applicable trade agreements.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480490000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480490000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84804900 | 3.1% | Free (17 programs) | — |
| 8480490090 | — | — | ["No."] |
| 8480490010 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8480.49?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 848049 cover?
This subheading covers other moulds for the manufacture of articles of plastics or rubber, not specified or included in preceding subheadings of heading 8480. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category encompasses a broad range of moulds designed for injection moulding, compression moulding, blow moulding, and other processes used to shape polymers. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm that these are typically custom-made or standard moulds for producing a wide variety of plastic and rubber items, excluding those specifically enumerated elsewhere.
What falls outside HS 848049?
The following products are excluded from HS 848049: moulds for working metal or metal carbides (heading 8480.10), moulds for glass (heading 8480.20), and moulds for ceramic products (heading 8480.30). Additionally, moulds for specific materials like wood or paper pulp are also excluded. For instance, moulds for casting concrete (heading 8480.71) or moulds for semiconductor devices (often classified under heading 8543 or 8486) would not fall under this subheading.
What are common classification mistakes for HS 848049?
A common error is misclassifying moulds based on the final product rather than their intended use for plastics or rubber. For example, a mould designed to produce plastic toys might be mistakenly classified under a heading related to toys. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. Importers must ensure the mould is specifically for shaping plastics or rubber, and not for other materials like metal or glass, which have their own dedicated headings.
How should importers classify products under HS 848049?
The correct procedure for classifying products under HS 848049 involves a thorough examination of the mould's design, material compatibility, and intended manufacturing process. Importers and customs brokers should consult the official WCO HS Explanatory Notes and the specific national tariff schedules, such as the USITC HTS or the EU TARIC. Key factors include confirming the mould is designed for plastics or rubber and is not specifically covered by a more precise subheading within heading 8480 or elsewhere in Chapter 84.
How is the duty calculated for products under HS 848049?
A custom injection mould for producing plastic automotive interior components, weighing 500 kg and declared at a customs value of $15,000 USD, would attract a US duty. Assuming a Most Favored Nation (MFN) duty rate of 3.7% ad valorem, the duty would be $555.00 USD ($15,000 × 0.037). This calculation is based on the value of the imported mould and the MFN rate published in the USITC Harmonized Tariff Schedule, HTSUS, under subheading 8480.49.00.00.
Which trade agreements reduce duties for HS 848049?
Several free trade agreements may reduce the applicable duty rate for HS 848049, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying moulds originating from Canada or Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement is required. Additionally, for imports into the European Union, moulds originating from countries with preferential trade agreements may benefit from reduced rates, often requiring an EUR.1 movement certificate.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 848049?
The Most Favored Nation (MFN) duty rate for HS code 848049, which covers 'Other moulding boxes for metal casting', is 3.1%. However, preferential duty rates may apply under various trade agreements. For example, goods originating from countries with Free Trade Agreements (FTAs) with the importing country might have reduced or zero duty rates. It is crucial to consult the specific tariff schedule of the importing country and verify the origin of the goods to determine the applicable duty.
How is the import duty for HS 848049 calculated, and can you provide an example?
The import duty for HS code 848049 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if the MFN duty rate is 3.1% and the declared value of a shipment of 'other moulding boxes for metal casting' is $10,000, the import duty would be calculated as: $10,000 (value) × 0.031 (duty rate) = $310. Always ensure the customs value is correctly determined according to the relevant valuation rules.
What are the classification criteria for items falling under HS code 8480.49?
HS code 8480.49 is a residual category for 'Other moulding boxes for metal casting'. Items classified here are typically used in the process of creating metal castings. They are distinct from the more specifically enumerated moulding boxes for metal casting found in other subheadings of 8480. To ensure correct classification, the importer or customs broker must confirm that the moulding boxes are indeed for metal casting and do not fit into more specific descriptions within Chapter 84, such as those for plastics or glass.
Which trade agreements commonly offer preferential duty rates for HS code 848049?
Several trade agreements can provide preferential duty rates for goods classified under HS code 848049. For example, the USMCA (United States-Mexico-Canada Agreement) may offer preferential treatment for goods originating from Canada or Mexico. Similarly, the EU's Generalized Scheme of Preferences (GSP) or Free Trade Agreements with countries like South Korea (KR) or Singapore (SG) could result in reduced or zero duties. Importers must verify the specific origin of their goods and consult the tariff schedule of the importing country to confirm eligibility for preferential rates under agreements such as those with Australia (AU), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), Morocco (MA), Oman (OM), Peru (PE), and others listed with a 'Free' rate.
What documentation is typically required for importing goods under HS code 848049?
When importing goods under HS code 848049, standard import documentation is generally required. This includes a commercial invoice detailing the description, quantity, value, and origin of the 'other moulding boxes for metal casting'. A packing list, bill of lading or air waybill, and import declaration are also essential. If claiming preferential duty rates under a trade agreement, a certificate of origin or other proof of origin acceptable to customs authorities will be mandatory. Depending on the importing country and the specific nature of the goods, additional permits or licenses might be necessary.