HS 848030 Moulding patterns
Quick Answer: Moulding patterns imported under HS 848030 enter the UK at 0.00%, the EU at 1.70% (MFN), and the US at 2.8% (MFN). This HS code encompasses patterns used to form the shape of a mould, typically for casting or molding operations in industries such as metalworking, plastics, and ceramics. These patterns are essential for creating the cavities in molds that will then be filled with material to produce the final product. Importers should be aware of potential variations in duty rates based on preferential trade agreements, particularly in the US market where several countries benefit from duty-free entry. CustomTariffs aggregates this information to aid in compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480300000 | — | — | — |
| 8480301000 | 0.00 % | — | — |
| 8480309000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480300000 | — | — | — |
| 8480301000 | 1.70 % | — | — |
| 8480309000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8480300000 | 2.8% | Free (17 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8480.30?
Imports of Moulding patterns may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 848030 cover?
This subheading covers moulding patterns, which are models or templates used to create moulds for casting or shaping materials. According to the World Customs Organization (WCO) Harmonized System Nomenclature, these patterns are essential tools in the manufacturing process, serving as the basis for the mould cavity. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that this category includes patterns made from various materials, such as wood, metal, or plastic, specifically designed for use in the production of moulds for articles falling under Chapter 84.
What falls outside HS 848030?
The following products are excluded from HS 848030: finished moulds themselves, which are classified under HS 8480.71 (for injection or compression types) or other relevant subheadings within 8480 depending on their specific function and construction. Also excluded are master models or prototypes that are not directly used to create a mould cavity, as well as general tools or machinery not specifically designed as moulding patterns. For instance, a finished die for stamping metal would be classified elsewhere, not as a moulding pattern.
What are common classification mistakes for HS 848030?
A common error is the misclassification of finished moulds as moulding patterns. This often occurs when the distinction between the pattern (the model for the mould) and the mould itself is not clearly understood. According to General Rule of Interpretation (GRI) 1 of the Harmonized System, classification is determined by the terms of the heading and any relative section or chapter notes. Importers may also incorrectly classify master patterns or prototypes that are not intended for direct use in mould creation, leading to incorrect duty assessments.
How should importers classify products under HS 848030?
The correct procedure for classifying products under HS 848030 involves a thorough examination of the product's intended use and its physical characteristics. Importers and customs brokers must determine if the item is a model or template specifically designed to form the cavity of a mould. Consulting the official HS Explanatory Notes and relevant national tariff schedules, such as the UK Trade Tariff, is crucial. Verification of the material composition and the manufacturing process can also aid in accurate classification.
How is the duty calculated for products under HS 848030?
A set of custom-machined aluminum moulding patterns for automotive components, weighing 50 kg and declared at a customs value of $5,000 USD, would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value: 5.0% × $5,000 USD = $250.00. This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule (HTS) for subheading 8480.30.0000.
Which trade agreements reduce duties for HS 848030?
Several free trade agreements may reduce the applicable duty rate for HS 848030, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible originating goods from certain developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries is typically required, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 848030, 'Moulding patterns'?
The Most Favored Nation (MFN) duty rate for HS code 848030, 'Moulding patterns', can vary. For instance, the United States applies a 2.8% ad valorem duty. The European Union's TARIC system may show rates such as 1.70% ad valorem, while the UK Trade Tariff might list a 2.70% ad valorem duty. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate applicable at the time of import.
How are 'Moulding patterns' classified under HS code 8480.30, and what distinguishes them from other patterns?
HS code 8480.30 covers 'Moulding patterns'. These are typically used to create a mold cavity or core, which is then used to produce the final product through molding processes (e.g., casting, injection molding). They are distinct from the molds themselves (which fall under other headings like 8480.10 to 8480.79) or master models. The key criterion is their function as a template or guide for forming the mold, rather than being the direct container for the molding material. Verification often requires examining product literature and the manufacturing process.
What preferential duty rates are available for HS code 848030 under trade agreements, and how can importers claim them?
Many trade agreements offer preferential duty rates for goods classified under HS 848030. For example, under certain agreements, goods may enter duty-free (Free). Examples of countries or blocs that may offer preferential rates include Australia (AU), Canada (CA), Chile (CL), South Korea (KR), and Singapore (SG), among others listed as 'Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)'. To claim these rates, importers must provide a valid Certificate of Origin (COO) or other proof of preferential origin as stipulated by the specific trade agreement and the importing country's customs authority. This documentation must demonstrate that the goods meet the rules of origin criteria outlined in the agreement.
How is the import duty for HS code 848030 calculated, and can you provide an example?
The import duty for HS code 848030 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 2.8% and the declared customs value of a shipment of moulding patterns is $10,000 USD, the import duty would be calculated as follows: Duty Amount = Customs Value × Duty Rate. Duty Amount = $10,000 USD × 2.8% = $280 USD. Importers must ensure their customs value is accurately declared according to the transaction value method, as per World Trade Organization (WTO) valuation rules.
Are there specific documentation requirements beyond a commercial invoice and packing list for importing moulding patterns under HS 848030?
While a commercial invoice, packing list, and bill of lading are standard import documents, for HS code 848030, additional documentation may be required depending on the importing country and any claimed preferential treatment. If claiming preferential duty rates under a Free Trade Agreement (FTA), a valid Certificate of Origin (COO) specific to that FTA is mandatory. Some customs authorities may also request technical documentation, such as product brochures or specifications, to verify the classification of the 'moulding patterns' and ensure they are not misclassified as finished molds or other articles. It is advisable to check the specific import requirements of the destination country's customs agency.