HS 847780 Other machinery
Quick Answer: Machinery for working rubber or plastics, not elsewhere specified, enters the US at 3.1% ad valorem under the MFN rate, the EU at 1.70% ad valorem, and the UK at 0.00% ad valorem. This classification, HS 8477.80, encompasses a broad range of equipment used in manufacturing processes for these materials, excluding those specifically covered in other headings within Chapter 84. Importers should be aware of potential variations in specific subheadings and preferential duty rates that may apply based on country of origin, as detailed on platforms like CustomTariffs. Brokers should verify the precise nature of the machinery to ensure correct classification and duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477801900 | 0.00 % | — | — |
| 8477809100 | 0.00 % | — | — |
| 8477809300 | 0.00 % | — | — |
| 8477809500 | 0.00 % | — | — |
| 8477800000 | — | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477800000 | 1.70 % | — | — |
| 8477801100 | 1.70 % | — | — |
| 8477801900 | 1.70 % | — | — |
| 8477809100 | 1.70 % | — | — |
| 8477809300 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477800100 | 3.1% | Free (18 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8477.80?
Imports of Other machinery may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 847780 cover?
This subheading covers other machinery for working with plastics or with the principal materials of headings 8470 to 8472, not elsewhere specified or included. According to the World Customs Organization's Harmonized System Explanatory Notes, this includes machines for molding, extruding, or otherwise processing plastics and rubber, such as certain types of printing machines for plastics and machines for manufacturing plastic packaging. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database provide further detail, confirming the inclusion of various specialized processing equipment not falling under more specific subheadings within 8477.
What falls outside HS 847780?
The following products are excluded from HS 847780: machinery for working with rubber (which may be classified under other headings depending on specific function), machines for manufacturing goods from paper or paperboard (heading 8441), and machines for manufacturing glass (heading 8475). Furthermore, general-purpose machinery not specifically designed for working with plastics or the specified materials, such as standard industrial robots or general material handling equipment, would not be classified here. For instance, a simple conveyor belt system would not fall under this subheading.
What are common classification mistakes for HS 847780?
A common error is misinterpreting the scope of "other machinery" and classifying general industrial equipment that is not specifically designed for working with plastics or the materials mentioned in heading 8477. For example, a machine that performs a secondary function on plastic items, such as packaging or labeling, might be incorrectly classified here instead of under a more specific heading related to packaging or printing machinery. Adherence to General Interpretative Rule 3(a) and 3(b) is crucial for determining the most appropriate classification when multiple headings could potentially apply.
How should importers classify products under HS 847780?
The correct procedure for classifying products under HS 847780 involves a thorough examination of the machine's primary function and the materials it is designed to process. Importers and customs brokers must consult the official Harmonized System Explanatory Notes, the USITC HTS, and the EU TARIC database for detailed descriptions and exclusions. It is essential to identify if the machinery is specifically intended for working with plastics or the principal materials of headings 8470 to 8472 and if it is not more specifically classified elsewhere within Chapter 84 or other chapters.
How is the duty calculated for products under HS 847780?
A plastic film extrusion machine weighing 5,000 kg and declared at a customs value of $150,000 USD would attract a US duty of $15,000. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared customs value ($150,000 USD × 10% = $15,000). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 8477.80.9000, which is the most specific classification for such machinery.
Which trade agreements reduce duties for HS 847780?
Several free trade agreements may reduce the applicable duty rate for HS 847780, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. The Generalized System of Preferences (GSP) may also offer reduced or Free duty rates for originating goods from certain developing countries. To claim these preferences, importers typically need to provide a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 847780 in the US?
For HS code 847780, which covers 'Other machinery for working rubber or plastics' not specified elsewhere in heading 8477, the standard US Most Favored Nation (MFN) duty rate is 3.1% ad valorem. However, importers should always verify the specific tariff schedule for any applicable trade agreements or special provisions that might alter this rate. For instance, goods originating from countries with a Free Trade Agreement (FTA) with the US may qualify for preferential duty rates, potentially reducing or eliminating duties. It is crucial to consult the Harmonized Tariff Schedule of the United States (HTSUS) maintained by the US International Trade Commission (USITC) for the most accurate and up-to-date information.
How is the duty for HS 847780 calculated, and can you provide an example?
The duty for HS code 847780 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared value of the imported goods. For example, if the standard MFN duty rate is 3.1% and you import machinery valued at $100,000, the duty would be calculated as: $100,000 (value) × 0.031 (duty rate) = $3,100. Importers must ensure they are using the correct customs value, which generally includes the cost of the goods, insurance, and freight to the port of entry. Always refer to the specific tariff schedule for the applicable rate.
What documentation is typically required for importing machinery classified under HS 847780?
When importing machinery under HS code 847780, standard import documentation is usually required. This includes a commercial invoice detailing the description, quantity, unit price, and total value of the goods; a packing list specifying the contents of each package; and a bill of lading or air waybill as the contract of carriage. Depending on the origin of the goods and any claimed preferential treatment, a Certificate of Origin may be necessary. Additionally, specific safety or technical certifications might be required by the importing country's regulatory bodies to ensure the machinery meets local standards. Consult the customs authority of the importing country for a comprehensive list.
Are there preferential duty rates for HS 847780 under common trade agreements, such as USMCA or EU trade deals?
Yes, preferential duty rates for HS code 847780 can exist under various trade agreements. For example, under the United States-Mexico-Canada Agreement (USMCA), machinery originating from Canada or Mexico may qualify for duty-free treatment if it meets the agreement's rules of origin. Similarly, within the European Union, goods traded between member states are generally duty-free. For imports into the EU from third countries, the EU's TARIC database should be consulted, as specific preferential rates may apply based on agreements with countries like Switzerland, Norway, or those participating in the Generalized Scheme of Preferences (GSP). Always verify the origin of the goods and the specific rules of origin for the relevant trade agreement.
What distinguishes 'Other machinery' (847780) from other subheadings within HS 8477?
HS heading 8477 covers 'Machinery for working rubber or plastics or for the manufacture of the aforesaid products, not elsewhere specified or included in this Chapter'. Subheading 847780 specifically applies to 'Other machinery' within this heading, meaning it is for items that process rubber or plastics but are not covered by more specific subheadings like those for molding, extruding, or vulcanizing machinery. Classification hinges on the primary function of the machine. If a machine's principal use is the working of rubber or plastics and it doesn't fit into a more precisely defined category within 8477 (e.g., 8477.10 for molding machines, 8477.20 for extruding machines), then 847780 is the appropriate classification. Consulting the Explanatory Notes to the Harmonized System and national tariff rulings can aid in precise classification.