HS 847759 Other
Quick Answer: Machinery for the working of rubber or plastics, not elsewhere specified, enters the UK at 0.00%, the EU at 1.70%, and the US at 35% (MFN). This residual classification applies to specialized machinery for processing rubber or plastics that doesn't fit into more specific headings within Chapter 84. Importers should be aware of the significant duty rate disparity for the US market. Trade agreements can influence US rates, with some countries benefiting from duty-free entry. CustomTariffs aggregates this data, highlighting the importance of verifying specific country rates and any applicable preferential treatment before shipment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477590000 | — | — | — |
| 8477591000 | 0.00 % | — | — |
| 8477598000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477590000 | — | — | — |
| 8477591000 | 1.70 % | — | — |
| 8477598000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8477590100 | 3.1% | Free (18 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8477.59?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 847759 cover?
This subheading covers "other" machinery for the processing of plastics or of the principal materials of the three foregoing headings (8476, 8477, 8478), not elsewhere specified or included. According to the WCO Harmonized System Explanatory Notes and definitions found in official sources like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database, this category encompasses specialized machinery designed for molding, extruding, or otherwise working with plastics and similar materials that do not fit into more specific subheadings within heading 8477. Examples include certain types of plastic welding machines and specialized plastic forming equipment.
What falls outside HS 847759?
The following products are excluded from HS 847759: machinery for processing rubber, machines for the manufacture of semiconductor devices (heading 8486), and machines for the manufacture of printed circuits (heading 8472). Specifically, machines for molding rubber, such as vulcanizing presses for rubber, are classified under heading 4017. Furthermore, general-purpose machinery not specifically designed for processing plastics, even if they can be adapted, would not fall under this subheading. For instance, standard industrial presses not dedicated to plastic processing are classified elsewhere.
What are common classification mistakes for HS 847759?
A common error is misclassifying machinery that performs a primary function other than plastic processing, or failing to identify a more specific subheading within heading 8477. For instance, machines that primarily cut or grind plastic materials, rather than mold or extrude them, might be incorrectly placed here. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial. If a product fits a more specific subheading, that subheading takes precedence over a more general one.
How should importers classify products under HS 847759?
The correct procedure for classifying products under HS 847759 involves a thorough examination of the machine's primary function and design. Importers and customs brokers must consult the official nomenclature, including the WCO HS Explanatory Notes, and relevant national tariff schedules such as the USITC HTS or EU TARIC. This process includes identifying the principal materials being processed and the specific operation performed. If the machine is designed for molding, extruding, or otherwise shaping plastics and does not fit any more specific subheading within 8477, then 8477.59 is likely appropriate.
How is the duty calculated for products under HS 847759?
A specific plastic injection molding machine for small parts, declared at a customs value of $15,000 USD, would typically attract a US Most Favored Nation (MFN) duty rate of 4.4% ad valorem. Therefore, the calculated US duty would be $660.00 USD ($15,000 × 0.044). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule (HTS) for subheading 8477.59.90.00, which is the most common classification for such machinery in the United States.
Which trade agreements reduce duties for HS 847759?
Several free trade agreements may reduce the applicable duty rate for HS 847759, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from certain developing countries. To claim these preferences, a self-certified origin statement is typically required for USMCA, while a GSP Form A or similar origin declaration is necessary for GSP benefits, depending on the importing country's specific requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the primary import duty rates for HS code 847759, and how do preferential rates apply?
HS code 847759 covers 'Other' machinery for working rubber or plastics. The Most Favored Nation (MFN) duty rate in the United States is 3.1% ad valorem. However, preferential rates are available under various trade agreements. For example, goods originating from countries like Australia (AU), Chile (CL), Japan (JP), or Singapore (SG) may receive a Free (0.00%) duty rate under specific agreements. Importers must ensure they have the necessary proof of origin to claim these preferential rates.
What specific criteria determine if machinery falls under HS code 847759?
HS code 847759 is a residual category for machinery specifically designed for the manufacture or processing of rubber or plastics, which are not elsewhere specified within heading 8477. This includes machines like vulcanizing presses, molding machines (other than injection, compression, or transfer types covered elsewhere), and extruders not specifically classified. The key is that the machine's primary function must be to work rubber or plastics through processes such as molding, pressing, extruding, or similar operations, and it must not fit into more specific subheadings of 8477.
What documentation is typically required for importing goods classified under HS code 847759?
For HS code 847759, standard import documentation includes a commercial invoice detailing the value, quantity, and description of the machinery; a packing list; and a bill of lading or air waybill. Depending on the country of origin and destination, a certificate of origin may be required, especially if claiming preferential duty rates. In the US, importers should also be prepared to provide technical specifications or brochures that clearly demonstrate the machine's function for working rubber or plastics to support the classification.
Which common trade agreements significantly impact the duty rates for HS code 847759?
Several trade agreements offer preferential duty rates for HS code 847759. For imports into the United States, agreements such as the US-Australia Free Trade Agreement (AU), US-Chile Free Trade Agreement (CL), US-Japan Economic Agreement (JP), and US-Singapore Free Trade Agreement (SG) can result in a 0.00% duty rate, provided the goods meet the rules of origin. Other agreements, like those with South Korea (KR) or the EU (though not a specific bilateral agreement for this code, general trade relations apply), also influence applicable duties. Always verify the specific terms and conditions of each agreement.
How is the import duty for HS code 847759 calculated, and can you provide an example?
The import duty for HS code 847759 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if the MFN duty rate is 3.1% ad valorem and an importer brings in machinery valued at $100,000 USD, the duty calculation would be: $100,000 (Value) × 0.031 (Duty Rate) = $3,100 (Import Duty). If a specific duty rate (e.g., per unit) were applicable, the calculation would be rate per unit × number of units. However, for 847759, ad valorem is the standard.