HS 847730 Blow-moulding machines

Quick Answer: Plastic blow-moulding machines imported under HS 847730 enter the UK at 0.00%, the EU at 1.70%, and the US at 3.1% MFN. This code specifically covers machinery designed for the production of hollow plastic articles through the blow moulding process, where a parison (a pre-formed tube of molten plastic) is inflated within a mould. Importers should be aware of potential preferential duty rates available in the US for goods originating from certain Free Trade Agreement partner countries. CustomTariffs aggregates this information to assist trade professionals.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
8477300000 0.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
8477300000 1.70 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
8477300000 3.1% Free (18 programs) ["No."]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 8477.30?

Imports of Blow-moulding machines may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, and 16 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 847730 cover?

This subheading covers machines specifically designed for blow-moulding, a process used to form hollow plastic items. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, these machines utilize a parison or preform that is inflated with air or gas within a mould cavity to achieve the desired shape. This includes machines for producing bottles, containers, and other hollow articles from thermoplastic materials.

What falls outside HS 847730?

The following products are excluded from HS 847730: machines for injection moulding (HS 847710), compression moulding (HS 847720), transfer moulding (HS 847720), and machines for processing rubber or thermosetting plastics by other methods. Furthermore, auxiliary equipment not integral to the blow-moulding process, such as separate granulators or conveyors, would be classified under their respective headings, typically within Chapter 84.

What are common classification mistakes for HS 847730?

A common error is misclassifying machines that perform multiple plastic processing functions but are not primarily blow-moulding machines. For instance, machines that combine injection moulding with blow-moulding might be incorrectly classified under 847730 if the injection moulding function is dominant. Adherence to General Interpretative Rule 3(c) is crucial, which states that goods are to be classified by the essential character of the product, often determined by the principal function or the component that gives it its essential character.

How should importers classify products under HS 847730?

The correct procedure for classifying products under HS 847730 involves a thorough examination of the machine's primary function and design. Importers and customs brokers must consult the official nomenclature, including the Explanatory Notes, and review technical specifications provided by the manufacturer. Confirming that the machine's core operation is the inflation of a parison or preform within a mould to create hollow articles is paramount for accurate classification.

How is the duty calculated for products under HS 847730?

A Kautex KBB45 blow-moulding machine, declared at a customs value of $250,000 USD, would attract a US duty of $12,500 USD. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, as published in the USITC Harmonized Tariff Schedule (HTS) for machines of this type. The calculation is: $250,000 (declared value) × 0.05 (duty rate) = $12,500 (duty amount).

Which trade agreements reduce duties for HS 847730?

Several free trade agreements may reduce the applicable duty rate for HS 847730, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer duty-free entry for eligible products from designated developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A is typically required, depending on the specific agreement and jurisdiction.

```

Which HS Codes Are Related?

HS 847710 HS 847740 HS 847751 HS 847720 HS 845430 HS 845730

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the typical import duty rates for HS code 847730 (Blow-moulding machines)?

The Most Favored Nation (MFN) duty rate for HS code 847730 can vary significantly by country. For instance, the USITC (United States International Trade Commission) generally lists a rate of 3.1% ad valorem for machines not specified elsewhere in heading 8477. However, preferential rates under various trade agreements can reduce or eliminate this duty. For example, under certain agreements (indicated by codes like A*, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG), the duty may be Free. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment.

How is the import duty for a blow-moulding machine calculated under HS 847730?

Import duty is typically calculated based on either an ad valorem rate (a percentage of the declared customs value of the goods) or a specific rate (a fixed amount per unit of quantity), or a combination of both. For HS 847730, the duty is often ad valorem. For example, if a blow-moulding machine is valued at $100,000 USD and the applicable MFN duty rate is 3.1%, the import duty would be $100,000 * 0.031 = $3,100 USD. If there were also a specific duty component, it would be added. Always confirm the exact calculation method and applicable rates with the importing country's customs authority.

What are the key classification criteria for machines to be classified under HS code 847730 (Blow-moulding machines)?

HS code 847730 specifically covers 'Blow-moulding machines'. The primary function of these machines is to produce hollow plastic items by inflating a heated plastic preform or parison within a mould. Key classification criteria include the mechanism for heating and extruding or injecting plastic, the mould clamping system, and the blowing mechanism that shapes the plastic into the desired hollow form. Machines primarily designed for other plastic working processes, such as injection moulding (8477.10) or extrusion (8477.20), would not be classified here.

What documentation is typically required when importing blow-moulding machines under HS 847730?

When importing blow-moulding machines classified under HS 847730, standard import documentation is generally required. This includes a commercial invoice detailing the value, description, and quantity of the goods; a packing list; a bill of lading or air waybill for transport; and a certificate of origin, especially if preferential duty rates are being claimed. Depending on the importing country and the specific machine, additional documentation such as technical specifications, safety certifications, or import licenses may be necessary. Consulting the customs authority of the destination country is recommended for a comprehensive list.

Which common trade agreements offer preferential duty rates for HS code 847730?

Several trade agreements can provide preferential duty rates, often resulting in Free entry, for HS code 847730. Examples include agreements between the US and countries like Australia (AU), South Korea (KR), and various Central/South American nations (e.g., CL, CO, PA, PE). The European Union's TARIC system and the UK Trade Tariff also list numerous preferential rates under agreements with countries like Canada (CA), Japan (JP), and Switzerland (CH), often denoted by specific codes. Importers must verify the specific origin of the goods and the eligibility criteria under the relevant trade agreement to claim these benefits.