HS 846890 Parts
Quick Answer: Parts for machines and apparatus for soldering, brazing, welding, or cutting, and parts for machines and apparatus for surface tempering by induction or dielectric, imported under HS 846890 enter the UK at 2.00%, the EU at 2.20%, and the US at rates varying from 2.9% to 45%, with some preferential duty-free entry for specific trade partners. This classification specifically covers components and accessories designed for use with the machinery detailed in HS heading 8468. Importers should be aware of the significant duty rate disparities across major markets and the potential for preferential treatment in the US. CustomTariffs aggregates this information, highlighting the need for careful verification of the applicable rate based on the country of origin and destination.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468900000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468900000 | 2.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468901000 | 2.9% | Free (17 programs) | ["No."] |
| 846890 | — | — | — |
| 8468905000 | Free | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8468.90?
Imports of Parts may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846890 cover?
This subheading covers parts and accessories specifically designed for machines and apparatus of heading 8468, which are used for working metal by means of welding (excluding gas welding of a kind used in metallurgy or metal construction), soldering or brazing, and for cutting. According to the World Customs Organization's Harmonized System Nomenclature, this includes components like welding nozzles, electrode holders, cutting torches, and control panels that are integral to the functioning of welding, brazing, soldering, or cutting machines of this heading. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database further define these parts by their specific function and compatibility with the parent machines.
What falls outside HS 846890?
The following products are excluded from HS 846890: general-purpose tools or parts not specifically designed for machines of heading 8468, such as standard wrenches or bolts, even if they might be used in the repair of such machines. Additionally, consumables like welding rods, filler metals, and gases used in the welding process are typically classified under different headings, often in Chapter 72 or 38. Spare parts for general industrial machinery not covered by heading 8468, or for hand-held tools not powered by a motor, are also excluded.
What are common classification mistakes for HS 846890?
A common error is misclassifying general-purpose fasteners or components that can be used across various types of machinery, rather than those specifically designed for welding, brazing, soldering, or cutting apparatus of heading 8468. This often arises from not adhering to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. For instance, a universal electrical connector might be mistakenly classified here if its primary intended use is not exclusively for machines of 8468.
How should importers classify products under HS 846890?
The correct procedure for classifying parts under HS 846890 involves first identifying the specific machine or apparatus of heading 8468 for which the part is intended. Importers and customs brokers must then consult the official tariff schedules, such as the USITC HTS or the EU TARIC, to verify that the part is indeed designed for and exclusively used with these specific machines. Reviewing product descriptions, technical specifications, and manufacturer's declarations is crucial to confirm the part's intended function and ensure it meets the criteria outlined in the WCO HS nomenclature.
How is the duty calculated for products under HS 846890?
A specific welding torch nozzle weighing 0.5 kg and declared at a customs value of $150 USD would attract a US duty of $15.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared value. The calculation is: 10% of $150 USD = $15.00. This rate is published in the USITC Harmonized Tariff Schedule (HTS) for parts of welding and cutting machines.
Which trade agreements reduce duties for HS 846890?
Several free trade agreements may reduce the applicable duty rate for HS 846890, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries. To claim these preferences, a self-certified origin statement for USMCA or a specific origin declaration for CPTPP is typically required, depending on the jurisdiction and the specific agreement's rules of origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 846890 (Parts) into the United States?
The Most Favored Nation (MFN) duty rate for HS code 846890, covering parts of machinery for working metal or metal carbides, or for working plastics, into the United States is 2.00% ad valorem. Preferential duty rates may apply under various trade agreements. For example, goods originating from Australia (AU), Chile (CL), or South Korea (KR) may be eligible for duty-free entry (Free). Importers should consult the Harmonized Tariff Schedule of the United States (HTSUS), maintained by the US International Trade Commission (USITC), for the most current and specific rates applicable to their country of origin.
How is the import duty for HS code 846890 calculated for a shipment to the UK?
For imports into the United Kingdom under HS code 846890, the standard duty rate is 2.20% ad valorem. If you are importing parts for welding or soldering machines, the rate is 0%. To calculate the duty, multiply the customs value of the goods by the applicable duty rate. For example, if you import parts valued at £10,000 with a standard duty rate of 2.20%, the import duty would be £10,000 × 0.0220 = £220. It is crucial to verify the specific rate and any potential additional charges (like VAT) on the UK Trade Tariff website, referencing the correct commodity code.
What documentation is typically required when importing parts classified under HS code 846890 into the European Union?
When importing parts under HS code 846890 into the European Union, standard customs documentation is required, including a commercial invoice, packing list, and bill of lading or air waybill. Proof of origin may be necessary to claim preferential duty rates under trade agreements. Depending on the specific type of machinery these parts are intended for, additional certifications or declarations might be required to ensure compliance with EU safety and technical standards. Always consult the EU's TARIC database for the most accurate and up-to-date import requirements and potential licensing needs for your specific product and country of origin.
Are there significant trade agreements that offer reduced or free duties for HS code 846890 imports into the US?
Yes, several trade agreements can significantly impact duty rates for HS code 846890 imports into the United States. For instance, goods originating from countries like Australia (AU), Chile (CL), Colombia (CO), South Korea (KR), and Peru (PE) may benefit from preferential duty rates, often including duty-free entry (Free), under agreements such as the US-Chile Free Trade Agreement or the US-Korea Free Trade Agreement. To claim these benefits, importers must provide a valid Certificate of Origin and ensure the goods meet the relevant rules of origin stipulated in the respective trade agreement. The USITC's HTSUS provides details on these preferential rates.
What constitutes 'parts' for the purpose of HS code 846890 classification, and how does this affect duty calculation?
For HS code 846890, 'parts' are generally understood to be articles that are not finished machines but are specifically designed for use with the machines covered by heading 8468 (machines and apparatus for working metal or metal carbides, or for working plastics, not elsewhere specified or included). These parts should be identifiable as being solely or principally intended for such machines. For example, a specialized nozzle for a welding machine (heading 8468) would be classified as a part under 846890. If the part is a general-purpose component (e.g., a standard screw or bolt not specifically designed for a 8468 machine), it would be classified elsewhere. The duty calculation is based on the value of these specific parts, using the applicable ad valorem rate. For instance, if a shipment of specialized welding machine parts is valued at $5,000 and the MFN duty rate is 2.00%, the duty would be $5,000 × 0.02 = $100.