HS 846810 Hand-held blow pipes
Quick Answer: Hand-held blow pipes imported under HS 846810 enter the UK at 2.00%, the EU at 2.20%, and the US with a complex tariff structure including free entry for certain trade partners and rates up to 45% for others. This HS code specifically covers portable devices designed to produce a flame or jet of hot gas for welding, brazing, or similar applications, typically powered by gas. Importers should be aware of the significant duty rate variations across major markets, necessitating careful planning and verification of specific country-specific tariff schedules. CustomTariffs aggregates this data, highlighting the importance of precise classification for accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468100000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468100000 | 2.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8468100000 | 2.9% | Free (17 programs) | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8468.10?
Imports of Hand-held blow pipes may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846810 cover?
This subheading covers "Hand-held blow pipes." According to the World Customs Organization's Harmonized System Nomenclature, this category specifically includes portable devices designed to produce a flame or jet of hot gas for soldering, brazing, or similar applications. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC system align with this definition, encompassing devices like propane torches and oxy-acetylene hand torches that are designed for manual operation and portability, often used in repair, construction, and craft industries.
What falls outside HS 846810?
The following products are excluded from HS 846810: stationary welding or cutting machines, industrial furnaces, and large-scale gas-generating equipment. For instance, large industrial welding stations with integrated fume extraction systems, or portable generators that produce gas for other purposes, would be classified under different headings. Similarly, simple gas lighters or culinary torches, while producing a flame, are typically classified elsewhere based on their primary function and design, often falling under headings for lighting or kitchen appliances.
What are common classification mistakes for HS 846810?
A common error is misclassifying more complex, integrated welding or cutting systems as hand-held blow pipes. This often occurs when devices have some portable components but are designed for more specialized industrial processes requiring significant setup. According to General Rule of Interpretation (GRI) 3(b), when goods are presented in sets, they are classified according to the component that gives them their essential character. A hand-held blow pipe is primarily a single, self-contained tool, unlike a comprehensive welding kit.
How should importers classify products under HS 846810?
The correct procedure for classifying products under HS 846810 involves a thorough examination of the product's design, function, and portability. Importers and customs brokers should consult the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and compare the product's characteristics against the descriptive notes for heading 8468 and subheading 846810. Verifying the intended use and ensuring the device is designed for hand-held operation is crucial for accurate classification.
How is the duty calculated for products under HS 846810?
A portable propane torch kit weighing 0.5 kg and declared at a customs value of $50 USD would attract a US duty of $2.50. This is calculated using the Most Favored Nation (MFN) rate of 5.0% ad valorem, applied to the declared customs value. The calculation is: 5.0% × $50 USD = $2.50. This rate is published in the USITC Harmonized Tariff Schedule (HTS) for subheading 846810.0000, assuming no preferential trade agreements apply.
Which trade agreements reduce duties for HS 846810?
Several free trade agreements may reduce the applicable duty rate for HS 846810, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a specific certificate of origin for other agreements, depending on the jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846810, 'Hand-held blow pipes'?
The Most Favored Nation (MFN) duty rate for HS code 846810, 'Hand-held blow pipes', can vary. For example, the USITC provides a rate of 2.00% ad valorem. The UK Trade Tariff lists a rate of 2.20% ad valorem. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate applicable at the time of import. Rates can change due to trade policy updates.
How is the import duty for HS 846810 calculated, and can you provide an example?
The duty for HS code 846810 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a hand-held blow pipe is valued at $100 USD and the MFN duty rate is 2.00%, the import duty would be $100 USD * 0.02 = $2.00 USD. Always ensure your customs value is accurate and supported by commercial documentation.
What are the classification criteria for goods falling under HS code 846810?
HS code 846810 covers 'Hand-held blow pipes'. This classification generally applies to portable devices designed to produce a flame or jet of hot gas or air, typically powered by gas or electricity, and intended for use in soldering, brazing, welding, or heating applications. The key differentiator is that they are designed to be held and operated by hand. Devices that are not hand-held, or that have significantly different primary functions, would likely be classified elsewhere.
Which trade agreements offer preferential duty rates for HS code 846810?
Several trade agreements can provide preferential duty rates for goods classified under HS code 846810. For instance, under the USMCA (United States-Mexico-Canada Agreement), goods meeting the rules of origin may receive duty-free treatment. Other agreements, such as those with Australia (AU), South Korea (KR), and Singapore (SG), also offer preferential rates, often resulting in 'Free' duty status, as indicated by the sample rates provided. Importers must verify the specific rules of origin and ensure proper documentation, such as a Certificate of Origin, is provided to claim these benefits.
What documentation is typically required when importing goods under HS code 846810?
When importing hand-held blow pipes (HS 846810), standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill for transport. If claiming preferential duty rates under a Free Trade Agreement (FTA), a valid Certificate of Origin specific to that agreement is mandatory. Depending on the importing country and the specific product, additional safety certifications or declarations might be needed. Always consult the customs authority of the destination country for a comprehensive list.