HS 846792 Of pneumatic tools
Quick Answer: Parts for pneumatic tools imported under HS 846792 enter the UK duty-free, the EU at 1.70% ad valorem, and the US with rates ranging from Free to 27.5% ad valorem. This classification specifically covers components and accessories designed for use with pneumatic tools, such as drills, sanders, and grinders. Importers should verify the specific US tariff provision applicable to their goods, as rates vary significantly. According to CustomTariffs data, understanding these jurisdictional differences is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8467920000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8467920000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8467920050 | — | — | ["No."] |
| 84679200 | Free | — | — |
| 8467920090 | — | — | ["No."] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How to Classify This HS Code?
What products does HS 846792 cover?
This subheading covers parts and accessories specifically designed for pneumatic tools, as defined by the World Customs Organization (WCO) Harmonized System Nomenclature. This includes components such as chucks, collets, bits, and housings intended for use with tools powered by compressed air. According to the US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database, these parts are classified here when they are not more specifically provided for elsewhere and are solely or principally intended for pneumatic tools of heading 8467.
What falls outside HS 846792?
The following products are excluded from HS 846792: complete pneumatic tools themselves, which are classified under heading 8467; general-purpose tools or parts that can be used with both pneumatic and non-pneumatic tools (unless specifically designed for pneumatic use); and spare parts for other types of power tools, such as electric or internal combustion engine tools. For instance, a drill bit for an electric drill would not be classified here, nor would a general-purpose wrench that could be used manually or with a pneumatic impact wrench.
What are common classification mistakes for HS 846792?
A common error is misclassifying parts that are not exclusively or principally for pneumatic tools. For example, a universal coupling or hose fitting that can be used with various types of air-powered equipment, not just hand-held tools of heading 8467, might be incorrectly placed here. According to General Rule of Interpretation (GRI) 1, classification should be based on the terms of the headings and any relative section or chapter notes. If a part has multiple uses, its principal intended use dictates its classification.
How should importers classify products under HS 846792?
The correct procedure for classifying parts and accessories for pneumatic tools under HS 846792 involves a thorough examination of the product's design, intended use, and material composition. Importers and customs brokers should consult the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and review the explanatory notes for heading 8467. Verifying that the part is specifically manufactured for and exclusively or principally used with pneumatic hand tools is crucial for accurate classification.
How is the duty calculated for products under HS 846792?
A set of 10 replacement chucks for a pneumatic drill, weighing 2.5 kg and declared at a customs value of $150 USD, would attract a US duty of $10.50. This is calculated using the Most Favored Nation (MFN) duty rate of 7.0% ad valorem, applied to the declared value ($150 USD × 0.07 = $10.50). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for subheading 8467.92.0000.
Which trade agreements reduce duties for HS 846792?
Several free trade agreements may reduce the applicable duty rate for HS 846792, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating parts from Canada and Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement on the commercial invoice is typically required. Additionally, for goods originating in countries benefiting from the Generalized System of Preferences (GSP) in some jurisdictions, a GSP Form A may be necessary to obtain preferential rates, often resulting in a reduced duty or Free entry.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 8467.92, specifically for parts of pneumatic tools?
The import duty rates for HS code 8467.92, which covers parts of pneumatic tools, can vary significantly depending on the country of origin and applicable trade agreements. For instance, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) duty rate is often 3.5% ad valorem. However, preferential rates under trade agreements like the USMCA (United States-Mexico-Canada Agreement) may offer duty-free entry (0.00%) if the parts meet the rules of origin. It is crucial to consult the specific tariff schedule of the importing country, such as the USITC HTS or the EU TARIC database, for the most accurate and up-to-date rates applicable to your specific import.
How is the import duty for HS code 8467.92 calculated, and can you provide an example?
The import duty for HS code 8467.92 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 3.5% ad valorem and you import parts for pneumatic tools with a declared customs value of $10,000, the duty would be calculated as: $10,000 (customs value) × 0.035 (duty rate) = $350. Some parts might also have specific duties or a combination of ad valorem and specific duties, so always verify the exact duty calculation method in the importing country's tariff schedule.
What are the key classification criteria for HS code 8467.92, and what distinguishes these parts from other machine parts?
HS code 8467.92 specifically covers 'Parts' of the pneumatic tools classified under heading 8467. The primary classification criterion is that the part must be designed for use with, or be a component of, a pneumatic tool. Pneumatic tools are machines that operate by means of compressed air. Therefore, parts such as cylinders, pistons, valves, casings, or other internal components specifically manufactured for pneumatic drills, grinders, sanders, or hammers would fall under this code. Parts that are generic and could be used in multiple types of machinery, or parts for non-pneumatic tools, would be classified elsewhere.
What documentation is typically required when importing goods classified under HS code 8467.92?
When importing parts for pneumatic tools under HS code 8467.92, standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the parts; a packing list; and a bill of lading or air waybill. Crucially, for preferential duty rates, a Certificate of Origin demonstrating that the goods meet the relevant rules of origin under a specific trade agreement (e.g., USMCA, EU Free Trade Agreements) is often mandatory. Importers and customs brokers should also be prepared to provide technical specifications or product literature if customs authorities request further verification of classification or origin.
How do trade agreements, such as USMCA or EU agreements, impact the duty rates for HS code 8467.92?
Trade agreements can significantly reduce or eliminate import duties for HS code 8467.92. For example, under the USMCA, parts of pneumatic tools originating from Canada or Mexico may qualify for duty-free treatment (0.00%) provided they meet the agreement's specific rules of origin, which often relate to regional value content or tariff shift requirements. Similarly, the EU has numerous Free Trade Agreements (FTAs) with various countries that can offer preferential duty rates. Importers must obtain a valid Certificate of Origin from the exporter and ensure the parts genuinely originate in the FTA partner country to claim these benefits. Consulting the tariff database of the importing country (e.g., EU TARIC, UK Trade Tariff) will detail the specific preferential rates available under each agreement.