HS 846692 For machines of heading 8465
Quick Answer: Parts and accessories for woodworking machines of heading 8465 enter the UK duty-free, the EU at 1.20% ad valorem, and the US with rates ranging from Free to 10% ad valorem. This classification specifically covers components and attachments designed for use with machines that shape wood, cork, bone, hard rubber, hard plastics, or similar hard materials. Importers should verify the specific sub-heading in each jurisdiction, as detailed product descriptions and origin rules can influence the final duty assessment. CustomTariffs aggregates this data, highlighting the need for precise classification to ensure compliance and optimize landed costs.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8466928000 | 0.00 % | — | — |
| 8466920000 | — | — | — |
| 8466922000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8466920000 | 1.20 % | — | — |
| 8466922000 | 1.20 % | — | — |
| 8466928000 | 1.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 846692 | — | — | — |
| 8466921000 | Free | — | ["kg"] |
| 8466925090 | — | — | ["No."] |
| 84669250 | 4.7% | Free (18 programs) | — |
| 8466925010 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8466.92?
Imports of For machines of heading 8465 may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846692 cover?
This subheading covers parts and accessories specifically designed for machines of heading 8465, which are woodworking machines. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this includes items such as saw blades, router bits, sanding discs, and chucks intended for use with machines like sawing, milling, or sanding wood. These are essential components that enable the primary function of the woodworking machinery.
What falls outside HS 846692?
The following products are excluded from HS 846692: general-purpose tools not specifically designed for woodworking machines of heading 8465, such as standard hand tools or power tools not integrated into a larger woodworking machine. Additionally, spare parts for machines that fall outside of heading 8465, like metalworking machines (heading 8456-8463) or general industrial machinery, are not classified here. For instance, a drill bit for metalworking would be classified elsewhere, typically under heading 8207.
What are common classification mistakes for HS 846692?
A common error is misinterpreting the "specifically designed for" criterion. Importers may incorrectly classify general-purpose accessories that could be adapted for woodworking machines but are not exclusively or primarily intended for them. For example, a generic cutting disc might be mistakenly classified here if it's also used for metal. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes, emphasizing the specific intended use.
How should importers classify products under HS 846692?
The correct procedure for classifying products under HS 846692 involves a thorough examination of the item's design and intended application. Importers and customs brokers must verify that the part or accessory is explicitly manufactured for use with woodworking machines falling under heading 8465. Consulting the official descriptions in the WCO HS Nomenclature, the USITC HTS, or the EU TARIC, and reviewing any relevant explanatory notes or rulings is crucial to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 846692?
A set of 50 carbide-tipped saw blades for a table saw, with a declared customs value of $500 USD, would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.0% ad valorem, as published in the USITC Harmonized Tariff Schedule. The calculation is: $500 (declared value) × 0.07 (duty rate) = $35.00 (duty amount). This specific rate applies unless a preferential trade agreement is applicable and properly documented.
Which trade agreements reduce duties for HS 846692?
Several free trade agreements may reduce the applicable duty rate for HS 846692, including the United States-Mexico-Canada Agreement (USMCA), which can lead to a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free rates for eligible goods from certain developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A may be required, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846692?
HS code 846692 covers parts and accessories for woodworking machines of heading 8465. Duty rates vary by country. For example, under the US Harmonized Tariff Schedule (USHTS), the Most Favored Nation (MFN) duty rate is 1.20% ad valorem. Under the EU's Combined Nomenclature (CN), the Third Country Duty rate is often 0.00% ad valorem for many parts and accessories. It is crucial to consult the specific tariff schedule of the importing country for the exact rate applicable to your shipment. The USITC provides detailed tariff information for the United States.
How is the import duty for HS 846692 calculated, and can you provide an example?
The duty for HS code 846692 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a shipment of parts for woodworking machines under HS 846692 has a declared customs value of $10,000 USD and the applicable duty rate is 1.20% (as per the USHTS MFN rate), the import duty would be calculated as: $10,000 USD × 1.20% = $120 USD. Always ensure the customs value is determined according to the rules of the importing country, often based on the transaction value.
What are the classification criteria for HS code 846692, and what distinguishes it from other codes?
HS code 846692 specifically applies to parts and accessories for machines of heading 8465, which covers woodworking machines (e.g., sawing, planing, mortising, tenoning, sanding, etc.). The key classification criterion is that the part or accessory must be designed for use with, and primarily intended for, a woodworking machine of heading 8465. Items that are general-purpose tools or parts not specifically designed for woodworking machines would fall under different HS codes. For instance, a generic screwdriver bit would not be classified here, but a specialized bit for a CNC wood shaper would be.
Are there preferential duty rates available for HS code 846692 under trade agreements?
Yes, preferential duty rates may be available for HS code 846692 depending on the origin of the goods and the trade agreements in force between the exporting and importing countries. For example, goods originating from countries that are part of the EU's Generalized Scheme of Preferences (GSP) or specific free trade agreements (FTAs) might benefit from reduced or zero duties when imported into the EU. Similarly, the US has FTAs with various countries that could impact the duty rate for goods classified under 846692. Importers must ensure they meet the rules of origin requirements for the relevant trade agreement and possess the necessary proof of origin documentation, such as a certificate of origin.
What documentation is typically required when importing goods under HS code 846692?
When importing parts and accessories for woodworking machines under HS code 846692, standard import documentation is generally required. This includes a commercial invoice detailing the goods, quantity, value, and country of origin; a packing list; and a bill of lading or air waybill. Depending on the importing country and any applicable trade agreements, a certificate of origin may be necessary to claim preferential duty rates. It is also advisable to have technical specifications or product literature that confirms the parts are indeed for woodworking machines of heading 8465, which can assist customs authorities in classification verification.