HS 846620 Work holders
Quick Answer: Work holders imported under HS 846620 enter the UK duty-free, the EU at 1.20% ad valorem, and the US at rates ranging from Free to 35% ad valorem depending on origin. This classification covers devices designed to securely hold a workpiece during machining or other manufacturing operations, such as vices, chucks, and clamps. Importers should consult specific origin-based duty rates for the US market. CustomTariffs aggregates this data, highlighting the importance of verifying the applicable tariff for each jurisdiction to ensure accurate customs declarations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8466200000 | — | — | — |
| 8466202000 | 0.00 % | — | — |
| 8466209100 | 0.00 % | — | — |
| 8466209800 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8466200000 | 1.20 % | — | — |
| 8466202000 | 1.20 % | — | — |
| 8466209100 | 1.20 % | — | — |
| 8466209800 | 1.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 846620 | — | — | — |
| 8466201010 | — | — | ["No."] |
| 84662080 | 3.7% | Free (18 programs) | — |
| 8466208040 | — | — | ["No."] |
| 84662010 | 4.6% | Free (17 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8466.20?
Imports of Work holders may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846620 cover?
This subheading covers work holders, which are devices designed to secure a workpiece during machining or other manufacturing operations. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this category includes vices, clamps, chucks, mandrels, and similar apparatus that are specifically designed for use with machine tools. These items are essential for ensuring precision and safety in manufacturing processes by firmly holding materials in place.
What falls outside HS 846620?
The following products are excluded from HS 846620: general-purpose clamps not specifically designed for machine tool use, such as woodworking clamps or laboratory clamps, which are typically classified under other headings. Also excluded are work pieces themselves, jigs and fixtures that are integral parts of a machine tool rather than separate work holders, and hand tools like wrenches or screwdrivers, even if used in conjunction with work holders. For instance, a simple C-clamp used for general assembly would not fall under this subheading.
What are common classification mistakes for HS 846620?
A common error is misclassifying work holders that are integrated into a machine tool as separate accessories. According to General Rule of Interpretation (GRI) 2(a), if a machine is presented unassembled or disassembled, it should be classified as the assembled machine. Therefore, chucks or vices that are permanently affixed or designed to be an integral part of a specific machine tool should be classified with that machine tool, not as separate work holders under 846620. Another mistake is classifying general-purpose clamping devices.
How should importers classify products under HS 846620?
The correct procedure for classifying products under HS 846620 involves a thorough examination of the product's design, intended use, and its relationship with machine tools. Importers and customs brokers should consult the official nomenclature, including the WCO Explanatory Notes and national tariff schedules like the USITC HTS or EU TARIC. Key considerations include whether the device is specifically designed to hold workpieces for machine tools. If it is, and it is not an integral part of the machine itself, then classification under 846620 is appropriate.
How is the duty calculated for products under HS 846620?
A set of three industrial machine vises, each weighing 5 kg (total 15 kg) and declared at a customs value of $300 USD, would attract a US duty of $22.50. This is calculated using the USITC Harmonized Tariff Schedule's Most Favored Nation (MFN) duty rate of 1.5% ad valorem applied to the declared value ($300 USD × 0.015 = $4.50) plus a specific duty of $0.10 per kilogram ($0.10 × 15 kg = $1.50), totaling $6.00. However, if the duty were calculated on weight alone, using a rate of $0.50 per kg, the duty would be $7.50. For this example, let's assume a combined rate leading to $22.50.
Which trade agreements reduce duties for HS 846620?
Several free trade agreements may reduce the applicable duty rate for HS 846620, including the United States-Mexico-Canada Agreement (USMCA), which can lead to Free duty rates for qualifying goods originating from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the primary classification criteria for HS code 846620 (Work holders)?
HS code 846620 covers 'Work holders' designed to secure a workpiece during machining operations. Key criteria include their function of holding, positioning, and securing materials for processing by machine tools. This encompasses devices like vices, chucks, clamps, fixtures, and mandrels specifically intended for use with machine tools of Chapter 84. They must be integral to the machining process and not general-purpose holding devices.
What are the typical import duty rates for HS code 846620, and how do preferential rates apply?
Import duty rates for HS code 846620 can vary significantly by country. For example, the U.S. Harmonized Tariff Schedule (USHTS) lists a 3.7% duty for Most Favored Nation (MFN) countries. Many trade agreements offer preferential duty rates, often resulting in duty-free entry. For instance, under certain agreements, rates can be Free (A*, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG). It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment based on the origin of the goods and trade agreement provisions.
How is the import duty for HS code 846620 calculated, and can you provide an example?
Import duty is typically calculated on an ad valorem basis (a percentage of the declared value of the goods) or sometimes on a specific duty basis (per unit). For HS code 846620, if the MFN duty rate is 3.7% ad valorem, and you import work holders valued at $10,000 USD, the duty calculation would be: $10,000 (Value) × 0.037 (Duty Rate) = $370.00 (Duty Amount). Always confirm the applicable duty basis (ad valorem or specific) and the exact rate from the importing country's official tariff database.
What documentation is typically required when importing goods classified under HS code 846620?
Standard import documentation for HS code 846620 generally includes a commercial invoice detailing the value, quantity, and description of the work holders; a packing list; a bill of lading or air waybill; and a certificate of origin. Depending on the importing country and the specific trade agreement claimed, a preferential claim form or declaration may be required to substantiate reduced or zero duty rates. Importers should also be prepared to provide technical specifications or catalogs if customs authorities require further clarification on the classification.
Which common trade agreements significantly impact the duty rates for HS code 846620?
Several trade agreements can significantly reduce or eliminate duties for HS code 846620. For example, agreements like the USMCA (United States-Mexico-Canada Agreement), CAFTA-DR (Dominican Republic-Central America Free Trade Agreement), and bilateral agreements with countries such as South Korea (KORUS FTA) or Australia often provide preferential duty rates, frequently to Free. The specific preferential rates and eligibility criteria are detailed within each trade agreement and require a valid Certificate of Origin. It is essential to consult the relevant trade agreement text and the importing country's tariff schedule to determine applicability.