HS 846330 Machines for working wire

Quick Answer: Machines for working wire imported under HS 846330 enter the UK at 2.00%, the EU at 2.70%, and the US at rates ranging from Free to 30%. This classification covers machinery specifically designed for operations such as drawing, straightening, cutting, bending, coiling, or otherwise processing wire. Importers should be aware of the significant duty rate variations across major markets, particularly the broad range in the US, which can be influenced by preferential trade agreements. CustomTariffs aggregates this data, highlighting the importance of verifying specific rates based on origin and destination.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
8463300000 2.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
8463300000 2.70 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
84633000 4.4% Free (18 programs) —
8463300040 — — ["No."]
8463300080 — — ["No."]
8463300060 — — ["No."]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 8463.30?

Imports of Machines for working wire may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, GSP, and 15 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 846330 cover?

This subheading covers machines specifically designed for working wire, as defined by the World Customs Organization's Harmonized System Nomenclature. This includes equipment for bending, straightening, coiling, cutting, weaving, braiding, or otherwise shaping wire. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that machines whose primary function is the manipulation of wire fall within this category, excluding general-purpose machinery that may incidentally process wire.

What falls outside HS 846330?

The following products are excluded from HS 846330: machines for working metal in general (which may have separate headings), machines for working sheet or strip of metal, and machines for working other materials. For instance, a machine that works both wire and solid metal rods would likely be classified elsewhere based on its primary function or the material it is principally designed for. Wire drawing machines, for example, are classified under HS 8455, and machines for making wire mesh are typically classified under HS 8441, not 846330.

What are common classification mistakes for HS 846330?

A common error is misinterpreting the primary function of a machine. General Interpretative Rule 3(b) of the Harmonized System, which addresses goods consisting of different materials or components, can be relevant. Importers may mistakenly classify a machine under 846330 when its principal purpose is not wire working, or when it is a composite machine where wire working is secondary. For example, a welding machine that also cuts wire might be classified under a welding equipment heading if that is its primary function.

How should importers classify products under HS 846330?

The correct procedure for classifying machines for working wire under HS 846330 involves a thorough examination of the machine's design, intended use, and operational capabilities. Importers and customs brokers must consult the Explanatory Notes to the Harmonized System, the specific definitions within the relevant national tariff schedule (e.g., USITC HTS, UK Trade Tariff), and any available rulings or decisions. Determining the machine's principal function is paramount, and if it performs multiple operations, the one that defines its essential character must be identified.

How is the duty calculated for products under HS 846330?

A coil winding machine for electrical wire, declared at a customs value of $5,000 USD, would attract a US duty of $175.00. This is calculated using the Most Favored Nation (MFN) rate of 3.5% ad valorem published in the USITC Harmonized Tariff Schedule (HTS) for HS code 846330. The calculation is: 3.5% × $5,000 = $175.00. This specific rate applies to goods imported from countries not covered by preferential trade agreements or specific duty exemptions.

Which trade agreements reduce duties for HS 846330?

Several free trade agreements may reduce the applicable duty rate for HS 846330, including the United States-Mexico-Canada Agreement (USMCA), which can provide for duty-free entry for qualifying originating goods. For goods originating in the United Kingdom, preferential rates or duty-free entry may be available under the UK-US Free Trade Agreement (when enacted) or similar bilateral arrangements. Documentation typically required includes a self-certified origin statement for USMCA or a EUR.1 movement certificate for certain other agreements, depending on the importing jurisdiction and the specific agreement.

```

Which HS Codes Are Related?

HS 846320 HS 846310 HS 846130 HS 846251 HS 846390 HS 846233

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the typical import duty rates for HS code 846330, machines for working wire?

The Most Favored Nation (MFN) duty rate for HS code 846330, machines for working wire, can vary. For example, the United States applies a 2.70% ad valorem duty. However, preferential rates are often available under various trade agreements. For instance, goods originating from countries like Australia (AU), Canada (CA), Chile (CL), South Korea (KR), or Japan (JP) may benefit from duty-free entry (Free). It is crucial to consult the specific tariff schedule of the importing country and verify the country of origin to determine the applicable duty rate.

How is the import duty for HS 846330 calculated, and can you provide an example?

The duty for machines under HS 846330 is typically calculated on an ad valorem basis, meaning it's a percentage of the item's value. For instance, if a wire straightening and cutting machine valued at $50,000 is imported into the United States, and the MFN duty rate is 2.70%, the duty would be calculated as follows: $50,000 (value) × 0.0270 (duty rate) = $1,350. Some machines may also have specific duties based on weight or other units, but ad valorem is most common for this code.

What specific types of machines are classified under HS 846330, and what are the classification criteria?

HS code 846330 covers machines specifically designed for working wire. This includes, but is not limited to, machines for drawing wire, straightening wire, cutting wire, coiling wire, weaving wire mesh, or producing wire nails, screws, or springs directly from wire. The key classification criterion is that the primary function of the machine must be the manipulation or processing of wire. Machines that perform other primary functions, even if they incidentally work with wire, would be classified elsewhere.

What documentation is typically required when importing machines classified under HS 846330?

When importing machines under HS 846330, standard import documentation is required, which typically includes a commercial invoice, packing list, and bill of lading or air waybill. Additionally, a certificate of origin is crucial, especially if claiming preferential duty rates under a trade agreement. Depending on the importing country and the specific machine, other documents like import licenses, safety certifications, or technical specifications might be necessary. Importers and customs brokers should verify the specific requirements with the customs authority of the destination country.

Which major trade agreements commonly provide preferential duty rates for HS 846330 imports?

Several trade agreements offer preferential duty rates for machines classified under HS 846330. For example, the United States has agreements like the USMCA (United States-Mexico-Canada Agreement) which can provide duty-free or reduced duty entry for qualifying goods. The EU's TARIC system and the UK's Trade Tariff also list numerous preferential rates stemming from agreements with countries such as Switzerland, Japan, and various ACP (African, Caribbean, and Pacific) states. Importers should always consult the relevant trade agreement and ensure their goods meet the rules of origin to benefit from these lower rates.