HS 846290 Other
Quick Answer: Machines for working metal under HS 846290 enter the UK duty-free, the EU at rates up to 2.70%, and the US with rates ranging from Free to 30%. This residual classification, "Other," applies to metal-forming machines not specifically enumerated in preceding headings within 8462. It encompasses a broad spectrum of equipment, including certain types of presses, bending machines, and straightening machines, where the primary function is to shape or form metal without removing material. Importers should carefully review the specific subheadings within 846290 for each jurisdiction, as the precise duty rate can vary significantly based on the machine's exact function and origin. CustomTariffs aggregates this data, highlighting the importance of precise classification for accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462900000 | — | — | — |
| 8462901000 | 0.00 % | — | — |
| 8462909000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462900000 | — | — | — |
| 8462901000 | 2.70 % | — | — |
| 8462909000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462904010 | — | — | ["No."] |
| 8462908060 | — | — | ["No."] |
| 84629040 | 4.4% | Free (17 programs) | — |
| 8462904030 | — | — | ["No."] |
| 84629080 | 4.4% | Free (18 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8462.90?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 846290 cover?
This subheading covers "other" machines for working metal by rolling or pressing, not elsewhere specified or included within heading 8462. According to the World Customs Organization's Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category encompasses a variety of metal-forming machines that do not fit into the more specific subheadings of 8462. Examples include certain types of straightening machines, bending machines not specifically covered elsewhere, and other metal-forming equipment not primarily involving punching, shearing, or forging.
What falls outside HS 846290?
The following products are excluded from HS 846290: machines for working metal by punching or by notching, machines for working metal by rolling or pressing (if specifically covered elsewhere in 8462, such as thread rolling machines), and machines for working metal by forging, hammering or die-stamping; presses which are not machines for working metal. For instance, hydraulic presses primarily used for plastic molding, or machines solely for cutting metal, would be classified under different headings, such as 8477 for plastic molding machinery or 8456 for laser/plasma cutting machines.
What are common classification mistakes for HS 846290?
A common error is misinterpreting the "other" designation, leading to the incorrect classification of machines that actually fall under more specific subheadings within 8462 or even other chapters of the HS. For example, a machine that performs both bending and shearing operations might be incorrectly classified as "other" if its primary function isn't clearly identified or if it doesn't meet the specific criteria of a more precise subheading. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to avoid such mistakes.
How should importers classify products under HS 846290?
The correct procedure for classifying products under HS 846290 involves a thorough examination of the machine's primary function and capabilities. Importers and customs brokers should consult the official Explanatory Notes for Heading 8462 and the specific definitions within their national tariff schedule, such as the USITC HTS or the UK Trade Tariff. If the machine is designed for working metal by rolling or pressing and is not specifically listed in other subheadings of 8462, and it doesn't fit into other HS chapters, then 846290 is likely appropriate. A detailed technical specification sheet is essential.
How is the duty calculated for products under HS 846290?
A metal straightening machine weighing 5,000 kg and declared at a customs value of $25,000 USD would attract a US duty of $1,250. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value: 5.0% × $25,000 = $1,250. This calculation is performed using the MFN rate published in the USITC Harmonized Tariff Schedule, under subheading 8462.90.0000 for "Other" metalworking machinery.
Which trade agreements reduce duties for HS 846290?
Several free trade agreements may reduce the applicable duty rate for HS 846290, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from certain developing countries. To claim these preferences, importers typically need to provide a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific requirements of the importing country's customs authority.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846290?
HS code 846290, classified under 'Other' machines for working metal, has varying duty rates depending on the importing country and any applicable trade agreements. For instance, the US applies a Most Favored Nation (MFN) rate of 2.70% ad valorem. The UK's rate can be 0.00% under certain conditions or trade agreements. The EU's TARIC system may also show different rates, often around 1.70% ad valorem for non-preferential imports. Always consult the specific country's tariff schedule for the definitive rate applicable to your import.
How is the duty for HS 846290 calculated, and can you provide an example?
The duty calculation for HS 846290 is typically based on the ad valorem system, meaning a percentage of the declared customs value of the goods. For example, if a machine classified under 846290 has a customs value of $10,000 and the applicable MFN duty rate is 2.70% (as in the US), the import duty would be calculated as: $10,000 (Customs Value) × 0.0270 (Duty Rate) = $270.00. Some specific machines under this code might also have specific duties based on weight or unit, but ad valorem is most common.
Which trade agreements commonly offer preferential duty rates for HS code 846290?
Several trade agreements can provide preferential duty rates for goods classified under HS 846290. For example, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada or Mexico may qualify for duty-free entry. Other agreements, such as those between the EU and various partner countries (e.g., South Korea, Chile), or the UK's Global Tariff which incorporates rates from its trade deals, often list preferential rates. The provided sample rates indicate potential free entry from countries like Australia (AU), South Korea (KR), and Singapore (SG) under specific agreements. Importers must verify the origin of the goods and the specific terms of the relevant trade agreement to claim preferential treatment.
What are the classification criteria for 'Other' machines under HS 846290?
HS code 846290 covers machines for working metal that are not specifically covered by other headings within 84.62 (such as automatic screw machines, boring, milling, and gear-cutting machines). This 'Other' category typically includes machines like hydraulic presses, bending machines, straightening machines, punching machines, and shearing machines for metal, provided they are not more specifically classified elsewhere. To correctly classify, one must determine if the machine's primary function is metalworking and if it does not fit the descriptions of more specific HS codes within the 8462 chapter. Consulting the Explanatory Notes of the Harmonized System is crucial for precise classification.
What documentation is typically required for importing machines under HS 846290?
Standard import documentation for machines under HS 846290 generally includes a commercial invoice detailing the machine's description, value, and origin; a packing list; and a bill of lading or air waybill. If claiming preferential duty rates under a trade agreement, a Certificate of Origin or a declaration of origin meeting the specific requirements of that agreement is mandatory. Depending on the machine's nature and the importing country's regulations, safety certifications, technical specifications, or import licenses might also be required. Always confirm the precise documentation needs with the customs authority of the destination country.