HS 846259 Other
Quick Answer: Machines for working metal, including presses, imported under HS 846259 enter the UK duty-free, the EU at 1.70% ad valorem, and the US with rates varying from 4.4% to 30%, with many preferential trade agreements offering duty-free entry. This residual classification, "Other," applies to metal-working machines not specifically enumerated in preceding subheadings within heading 8462. Importers should verify specific product descriptions against the detailed tariff schedules of their destination countries, as the broad nature of this code necessitates precise classification to avoid incorrect duty assessments. According to CustomTariffs data, understanding these jurisdictional differences is crucial for effective trade planning.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462590000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462590000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84625900 | 4.4% | Free (17 programs) | — |
| 8462590050 | — | — | ["No."] |
| 8462590010 | — | — | ["No."] |
| 8462590020 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8462.59?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846259 cover?
This subheading covers "other" machines for working metal by rolling or pressing, not elsewhere specified or included within heading 8462. According to the World Customs Organization (WCO) Harmonized System Nomenclature and definitions found in official sources like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database, this category is a residual one for metal forming machines that do not fit into the more specific subheadings of 8462, such as those for bending, folding, straightening, or punching. It generally includes machines for operations like shearing, cutting, or other pressing actions not covered by the preceding subheadings.
What falls outside HS 846259?
The following products are excluded from HS 846259: machines specifically designed for bending, folding, straightening, or punching metal (classified under 8462.21, 8462.29, 8462.31, 8462.39, 8462.41, 8462.49), and machines for working metal by forging, hammering, or die-stamping (classified under 8462.10). Also excluded are machines for working metal by rolling threads, pipe-threading or pipe-rolling (classified under 8462.91). For instance, a hydraulic press for forging (8462.10) or a bending machine (8462.29) would not be classified here.
What are common classification mistakes for HS 846259?
A common error is misinterpreting the "other" nature of this subheading, leading to the classification of machines that actually have a more specific designation under heading 8462. For example, machines performing a primary function of bending or punching metal, even if they incorporate some pressing action, should be classified under the more specific subheadings (e.g., 8462.29 for bending machines). Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to ensure correct classification based on the essential character of the machine.
How should importers classify products under HS 846259?
The correct procedure for classifying products under HS 846259 involves a detailed examination of the machine's primary function and capabilities. Importers and customs brokers must first consult the Explanatory Notes to HS Heading 8462 and the specific definitions within their respective national tariff schedules, such as the USITC HTS or the EU TARIC. If the machine's operation is not explicitly covered by the more specific subheadings of 8462 (e.g., bending, folding, straightening, punching, forging, hammering, die-stamping, thread rolling), and it is a machine for working metal by rolling or pressing, then classification under 8462.59 is appropriate.
How is the duty calculated for products under HS 846259?
A metal shearing machine weighing 5,000 kg and declared at a customs value of $25,000 USD would attract a US duty of $1,250. This is calculated using the Most Favored Nation (MFN) duty rate of 5% ad valorem, applied to the declared value ($25,000 USD × 0.05 = $1,250). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 8462.59. If the machine had a specific weight-based duty, that would be applied instead or in addition, depending on the tariff structure.
Which trade agreements reduce duties for HS 846259?
Several free trade agreements may reduce the applicable duty rate for HS 846259, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for goods originating from member countries like Japan or Australia. To claim these preferences, a valid USMCA Certificate of Origin or a CPTPP Certificate of Origin is typically required, depending on the specific agreement and origin of the goods.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846259?
HS code 846259 covers 'Other' machines which perform metalworking operations, not specified elsewhere in heading 8462. The Most Favored Nation (MFN) duty rate for this classification can vary significantly depending on the importing country. For example, in the United States, the general MFN rate is 3.5% ad valorem. In the European Union, under the TARIC system, the rate can be 0.00% or 1.70% ad valorem, subject to specific end-use or origin conditions. The UK Trade Tariff also shows varying rates, often around 4.4% ad valorem for non-preferential imports. It is crucial to consult the specific tariff schedule of the destination country for the definitive rate.
How are preferential duty rates applied to HS code 846259 under trade agreements?
Many trade agreements offer preferential duty rates for goods classified under HS 846259. For instance, the USMCA (United States-Mexico-Canada Agreement) might offer duty-free entry (0%) if the machine meets specific rules of origin. Similarly, agreements like those with Australia (AU), Chile (CL), South Korea (KR), or Singapore (SG) often provide preferential rates, which can be Free (0%) or reduced rates, provided the importer can present a valid Certificate of Origin or declaration demonstrating compliance with the agreement's rules of origin. Always verify the specific requirements of the relevant trade agreement and ensure proper documentation is provided.
What are the classification criteria for machines falling under HS code 846259?
HS code 846259 is a residual category for metalworking machines not specifically covered by other subheadings within 8462. This includes machines for working metal by punching, stamping, pressing, bending, folding, straightening, or other similar operations, which do not involve cutting. Examples might include certain types of hydraulic presses, bending machines, or straightening machines that do not remove material. The key is that the machine's primary function is to deform metal without removing it, and it is not otherwise classified. If a machine performs cutting operations, it would likely fall under a different HS code (e.g., 8456-8461).
What documentation is typically required for importing goods under HS code 846259?
Standard import documentation for HS code 846259 includes a commercial invoice detailing the machine's description, quantity, value, and country of origin. A packing list is also essential. For preferential duty rates, a Certificate of Origin or a declaration of origin compliant with the specific trade agreement is mandatory. Depending on the machine's complexity or intended use, additional documents like technical specifications, safety certifications (e.g., CE marking for EU), or import licenses might be required by the importing country's customs authority. Always consult the destination country's customs agency for a comprehensive list.
Can you provide an example of how import duty is calculated for HS code 846259?
Let's assume a machine classified under HS 846259 is imported into the United States with a Most Favored Nation (MFN) duty rate of 3.5% ad valorem. If the declared customs value of the machine is $50,000 USD, the import duty calculation would be: Duty Amount = Declared Value × Duty Rate. In this case, Duty Amount = $50,000 × 3.5% = $50,000 × 0.035 = $1,750 USD. Therefore, the import duty payable would be $1,750 USD. If the machine were eligible for a preferential rate, such as Free (0%) under a trade agreement, and all requirements were met, the duty would be $0.