HS 846229 Other
Quick Answer: Machines for bending, folding, straightening or flattening metal, not elsewhere specified, imported under HS 846229 enter the UK at 0.00%, the EU at 1.70% ad valorem, and the US with rates varying from 4.4% ad valorem to Free, depending on the country of origin. This "Other" category within bending and straightening machines captures equipment not specifically detailed in preceding subheadings, such as certain types of hydraulic presses or specialized forming machines. Importers should verify the precise classification and applicable duty rates for their specific product and origin country, as preferential trade agreements can significantly impact the final duty. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462290000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462290000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84622900 | 4.4% | Free (18 programs) | — |
| 8462290020 | — | — | ["No."] |
| 8462290040 | — | — | ["No."] |
| 8462290010 | — | — | ["No."] |
| 8462290030 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8462.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846229 cover?
This subheading covers "other" machines for working metal by rolling or folding, specifically those not covered by the preceding subheadings of 8462.21. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category includes machines designed for bending, folding, or otherwise shaping metal through processes other than those explicitly detailed in prior classifications, often involving specialized tooling or unique operational sequences.
What falls outside HS 846229?
The following products are excluded from HS 846229: machines for working metal by punching or stamping (HS 8462.10), machines for working metal by thread or screws (HS 8462.30), and machines for working metal by rolling or folding that are specifically designed for operations like threading, grooving, or seaming (HS 8462.21). For instance, a hydraulic press used for forging would be classified under HS 8462.10, not 846229, as it falls under punching or stamping operations.
What are common classification mistakes for HS 846229?
A common error is misinterpreting the specific operational characteristics of a metal-working machine. For example, classifying a machine that primarily performs stamping operations under 846229 when it should be classified under 8462.10. This often arises from not fully adhering to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1, which mandates classification according to the terms of the headings and any relative section or chapter notes, and GRI 3, for goods consisting of different materials or components.
How should importers classify products under HS 846229?
The correct procedure for classifying products under HS 846229 involves a detailed examination of the machine's primary function and operational mechanism. Importers and customs brokers must consult the official WCO HS Nomenclature, as well as the specific tariff schedules of the importing country (e.g., USITC HTS, EU TARIC, UK Trade Tariff). This requires understanding whether the machine's core purpose is bending, folding, or shaping metal through methods not specifically enumerated in other 8462 subheadings, ensuring that the machine's design and intended use align precisely with the descriptive text of 846229.
How is the duty calculated for products under HS 846229?
A specialized metal bending machine, weighing 5,000 kg and declared at a customs value of $75,000 USD, would attract a US duty of $5,625.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.5% ad valorem, applied to the declared customs value ($75,000 USD × 0.075 = $5,625.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 846229.9000.
Which trade agreements reduce duties for HS 846229?
Several free trade agreements may reduce the applicable duty rate for HS 846229, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries is typically required, depending on the specific origin of the goods and the importing country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the standard Most Favored Nation (MFN) duty rate for machines for bending, folding, straightening, or flattening metal, classified under HS code 846229?
The standard Most Favored Nation (MFN) duty rate for machines for bending, folding, straightening, or flattening metal, not specified elsewhere in heading 8462, classified under HS code 846229, is 1.70% ad valorem. This rate applies to imports from countries not covered by preferential trade agreements. For example, if a machine valued at $10,000 is imported, the MFN duty would be $10,000 \times 0.0170 = $170.00.
What are some common preferential duty rates applicable to HS code 846229 under various trade agreements?
HS code 846229 benefits from preferential duty rates under several trade agreements. For instance, under the US-Australia Free Trade Agreement (AU), the duty is Free. Similarly, imports from Chile (CL), South Korea (KR), and Singapore (SG) may also receive Free entry, depending on specific origin rules. Importers should always verify the specific origin of the goods and consult the relevant trade agreement annexes or the US International Trade Commission (USITC) Harmonized Tariff Schedule for precise eligibility and documentation requirements.
What specific criteria distinguish machines classified under HS 846229 from other headings within 8462?
HS code 846229 covers 'Other' machines for working metal by rolling, bending, folding, straightening, or flattening, not specifically enumerated in preceding subheadings of 8462. Heading 8462 primarily deals with metal-forming machines. Subheadings typically differentiate based on the specific working operation (e.g., forging or drop forging, straightening, bending, folding, etc.). If a machine's primary function is bending, folding, straightening, or flattening metal and it does not fit a more specific description in another subheading of 8462, it will likely fall under 846229. For example, a machine solely designed for rolling metal sheets would be classified elsewhere, while a machine that performs multiple bending operations without being a specialized press brake might be classified here.
What documentation is typically required for importing machines classified under HS code 846229, especially when claiming preferential duty rates?
When importing machines under HS code 846229, standard import documentation includes a commercial invoice, packing list, and bill of lading. If claiming preferential duty rates under a trade agreement (e.g., USMCA, KORUS FTA), a Certificate of Origin (COO) or a specific declaration of origin compliant with the agreement's requirements is mandatory. The COO must be issued by the exporter or producer and accurately reflect the origin of the goods. Failure to provide proper documentation can result in the denial of preferential treatment and the assessment of standard MFN duties. Always consult the specific requirements of the relevant trade agreement and US Customs and Border Protection (CBP) guidance.
How is the duty calculated for HS code 846229 if the import is subject to a specific trade agreement rate, and what if it's subject to a quota?
Duty calculation for HS code 846229 depends on the applicable rate. If a preferential rate is Free (e.g., under certain FTAs), the duty is $0. If a specific ad valorem rate applies, it's calculated as a percentage of the declared customs value. For example, if a machine is valued at $50,000 and the applicable duty rate is 1.70%, the duty is $50,000 \times 0.0170 = $850.00. Some goods may also be subject to tariff rate quotas (TRQs). Under a TRQ, a certain quantity or value of goods may enter at a lower or Free rate, but subsequent imports within a specified period face a higher duty rate (e.g., 30%). Importers must monitor quota levels and ensure compliance with TRQ provisions, often requiring specific declarations or licenses. The USITC Harmonized Tariff Schedule provides details on any applicable TRQs for this code.