HS 846226 Other numerically controlled bending, folding, straightening or flattening machines

Quick Answer: Machines for bending, folding, straightening, or flattening metal, controlled by numerical systems, imported under HS 846226 enter the UK at 0.00%, the EU at 2.70%, and the US at rates varying from Free to 30% depending on origin. This classification specifically applies to machines where pre-programmed instructions guide the precise manipulation of metal sheets or profiles. Importers should be aware of the significant duty rate disparities between major trading blocs. For instance, the US offers preferential duty rates for goods from certain Free Trade Agreement partners. CustomTariffs aggregates this information, highlighting the importance of verifying specific origin-based rates for accurate customs declarations and cost planning.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
8462260000 0.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
8462260000 2.70 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
8462260020 — — ["No."]
84622600 4.4% Free (18 programs) —
8462260010 — — ["No."]
8462260050 — — ["No."]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 8462.26?

Imports of Other numerically controlled bending, folding, straightening or flattening machines may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, GSP, and 15 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 846226 cover?

This subheading covers "Other numerically controlled bending, folding, straightening or flattening machines" within Heading 8462 of the Harmonized System. According to the World Customs Organization (WCO) Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database, this category specifically includes machines that perform these metalworking operations (bending, folding, straightening, or flattening) and are equipped with numerical control (NC) systems. These NC systems automatically guide the machine's movements based on programmed instructions, ensuring precision and repeatability in the fabrication of metal parts.

What falls outside HS 846226?

The following products are excluded from HS 846226: machines that perform bending, folding, straightening, or flattening operations but lack numerical control, as these would fall under other subheadings within 8462. Additionally, machines that primarily perform other metalworking operations, such as cutting, punching, or stamping, even if they have NC capabilities, are classified elsewhere. For instance, numerically controlled turret punch presses are typically classified under HS 846239, and numerically controlled shears under HS 846231.

What are common classification mistakes for HS 846226?

A common error is misinterpreting the "numerically controlled" aspect. Importers may mistakenly classify manually operated or simpler hydraulic/mechanical machines under this code if they perform bending or folding. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the heading and any relative section or chapter notes. If a machine has a sophisticated NC system that dictates its operations for bending, folding, straightening, or flattening, it belongs here; otherwise, it likely falls under a different subheading of 8462 or even a different heading entirely.

How should importers classify products under HS 846226?

The correct procedure for classifying products under HS 846226 involves a thorough examination of the machine's operational capabilities and control system. Importers and customs brokers must verify if the machine is designed for bending, folding, straightening, or flattening metal and, critically, if it utilizes a numerical control system to execute these functions. Consulting the machine's technical specifications, manufacturer's documentation, and cross-referencing with the WCO Explanatory Notes and relevant national tariff schedules (e.g., USITC HTS, EU TARIC) is essential for accurate classification.

How is the duty calculated for products under HS 846226?

A numerically controlled press brake weighing 5,000 kg and declared at a customs value of $75,000 USD would attract a US duty of $5,625.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.5% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS code 846226. The calculation is: 7.5% of $75,000 = $5,625.00. This rate applies to goods imported from countries not benefiting from preferential trade agreements.

Which trade agreements reduce duties for HS 846226?

Several free trade agreements may reduce the applicable duty rate for HS 846226, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada and Mexico, requiring a self-certified origin statement. Additionally, agreements like the EU-UK Trade and Cooperation Agreement can offer a Free duty rate for goods originating from the EU or UK, typically necessitating an EUR.1 movement certificate. The Generalized System of Preferences (GSP) may also offer reduced or Free rates for eligible goods from certain developing countries, often requiring a GSP Form A.

```

Which HS Codes Are Related?

HS 846222 HS 846225 HS 846223 HS 846224 HS 846233 HS 846242

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the typical import duty rates for HS code 846226, covering numerically controlled bending, folding, straightening, or flattening machines?

Import duty rates for HS code 846226 can vary significantly based on the country of origin and applicable trade agreements. For instance, under the U.S. Harmonized Tariff Schedule (USHTS), the Most Favored Nation (MFN) rate is often 2.70% ad valorem. However, preferential rates may apply. For example, goods originating from countries with specific trade agreements, such as Australia (AU) or Japan (JP), might enter duty-free (Free). It is crucial to consult the official tariff schedule of the importing country, such as the USITC's HTS or the EU's TARIC database, for the definitive rate applicable to your specific shipment.

How is the duty calculated for a machine classified under HS 846226?

The duty for machines classified under HS 846226 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if a numerically controlled bending machine valued at $50,000 is imported into the U.S. with a 2.70% MFN duty rate, the duty would be calculated as: $50,000 (Value) × 0.0270 (Duty Rate) = $1,350. Always ensure the customs value is determined according to the importing country's valuation rules, often based on the transaction value.

What are the key classification criteria for machines falling under HS code 846226?

HS code 846226 specifically covers 'Other numerically controlled bending, folding, straightening or flattening machines.' The key criteria for classification include: 1. Function: The machine must perform bending, folding, straightening, or flattening operations on materials like metal. 2. Numerical Control: The machine must be equipped with a numerical control (NC) system, which uses programmed instructions to automate the machine's operations. This distinguishes them from manually operated machines. 3. Exclusions: This code excludes machines that perform multiple operations not primarily focused on bending, folding, straightening, or flattening, which might fall under other headings. Consult the Explanatory Notes of the Harmonized System (WCO) for detailed guidance.

Which trade agreements commonly offer preferential duty rates for HS 846226, and what documentation is needed?

Several trade agreements can provide preferential duty rates for machines under HS 846226. Examples include agreements with countries like Australia (AU), Japan (JP), South Korea (KR), and others listed under the 'Free' rate in some tariff schedules. To claim preferential treatment, importers typically need a 'Certificate of Origin' or a 'Statement of Origin' issued by the exporter or manufacturer in the beneficiary country, certifying that the goods meet the rules of origin stipulated in the relevant trade agreement. This document must be provided to customs authorities at the time of import.

Are there specific documentation requirements beyond the commercial invoice and bill of lading for importing machines under HS 846226?

Beyond standard import documents like the commercial invoice, bill of lading, and packing list, importers of machines classified under HS 846226 may need to provide additional documentation. This can include: 1. Technical Specifications: Detailed brochures or specification sheets outlining the machine's capabilities, including its numerical control features. 2. Certificates of Origin: Essential for claiming preferential duty rates under trade agreements. 3. Import Licenses or Permits: Depending on the importing country's regulations and the specific type of machinery, certain licenses or permits might be required for safety or control purposes. It is advisable to check with the customs authorities of the destination country or consult with a customs broker for specific requirements.