HS 846219 Other
Quick Answer: Machines for the working of metal, under HS 846219, enter the US at 4.4% ad valorem (MFN), the EU at 2.70% ad valorem, and the UK at 0.00% ad valorem. This residual classification covers metal-working machines not specifically enumerated in preceding subheadings within heading 8462, such as certain types of punching, shearing, and stamping machines not classified elsewhere. Importers should verify specific product functionality against the detailed descriptions within the respective tariff schedules to ensure correct classification. According to CustomTariffs data, preferential duty rates may apply in the US for certain trading partners.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462190000 | — | — | — |
| 8462191000 | 0.00 % | — | — |
| 8462199000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462190000 | — | — | — |
| 8462191000 | 2.70 % | — | — |
| 8462199000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8462190010 | — | — | ["No."] |
| 8462190035 | — | — | ["No."] |
| 84621900 | 4.4% | Free (18 programs) | — |
| 8462190030 | — | — | ["No."] |
| 8462190055 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8462.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846219 cover?
This subheading covers "other" machines for working metal by rolling or the use of rollers, as per the WCO Harmonized System Nomenclature. This includes machines not specifically enumerated in preceding subheadings of 8462, such as certain types of straightening machines, flanging machines, and other metal-forming equipment that utilize rollers for shaping or processing metal. The USITC Harmonized Tariff Schedule (HTS) and EU TARIC database provide further detail on the specific functionalities and applications that define inclusion under this residual category.
What falls outside HS 846219?
The following products are excluded from HS 846219: machines for working metal by punching or stamping (8462.21), machines for bending or folding (8462.31), and machines for straightening, folding, or finishing (8462.41), as well as machines for working metal by forging, hammering or die-stamping (8462.91). Specifically, machines that primarily cut metal, such as shears, are classified under heading 8461. Machines for working metal by means of lasers or other light beams, or plasma jets, are typically classified under heading 8456.
What are common classification mistakes for HS 846219?
A common error is misinterpreting the primary function of the machine. For instance, a machine that primarily straightens metal using rollers might be mistakenly classified under a subheading for bending machines if it also possesses a minor bending capability. According to General Interpretative Rule 3(c) of the Harmonized System, when goods are classifiable by reference to the heading which occurs last in numerical order among those which equally merit consideration, this rule should be applied. Importers must carefully assess the principal purpose of the equipment.
How should importers classify products under HS 846219?
The correct procedure for classifying products under HS 846219 involves a thorough examination of the machine's operational mechanism and intended use. Importers and customs brokers must consult the official Explanatory Notes to the Harmonized System and the specific national tariff schedules, such as the USITC HTS or EU TARIC. Comparing the machine's features against the descriptions in heading 8462 and its subheadings, particularly the residual nature of 846219, is crucial to ensure accurate classification and avoid penalties.
How is the duty calculated for products under HS 846219?
A hypothetical 5-tonne capacity metal straightening machine, declared at a customs value of $50,000 USD, would attract a US duty of $2,500. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, as published in the USITC Harmonized Tariff Schedule for a similar machine. The calculation is: 5.0% × $50,000 USD = $2,500 USD. It is imperative to verify the specific HTS code and its associated duty rate for the exact product.
Which trade agreements reduce duties for HS 846219?
Several free trade agreements may reduce the applicable duty rate for HS 846219, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries. To claim these preferences, a valid USMCA Certificate of Origin or a CPTPP Certificate of Origin is typically required, depending on the jurisdiction and the specific agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 846219 in the United States?
For HS code 846219, the U.S. Most Favored Nation (MFN) duty rate is 0.00%. This classification covers 'Other' machines for working metal, powder metallurgy or for working plastic. It's important to verify if any special trade programs or agreements, such as those with Australia (AU) or Japan (JP), might offer duty-free entry under specific conditions, as indicated by 'Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)' which signifies duty-free treatment for countries with specific trade agreements. Always consult the latest Harmonized Tariff Schedule of the United States (HTSUS) for the most current rates and any applicable notes.
How is the duty calculated for HS code 846219 if a duty rate applies?
If a duty rate applies to HS code 846219, the calculation typically involves an ad valorem rate (a percentage of the item's value) or a specific rate (a fixed amount per unit). For example, if a country applies a 2.70% ad valorem duty rate and the declared value of the imported goods is $10,000, the duty would be calculated as: $10,000 (value) × 0.0270 (duty rate) = $270.00. Always confirm the specific duty calculation method and the declared value basis (usually the CIF value – Cost, Insurance, and Freight) with the relevant customs authority.
What documentation is typically required for importing goods classified under HS 846219?
For HS code 846219, standard import documentation usually includes a commercial invoice detailing the goods, quantity, value, and country of origin; a packing list; a bill of lading or air waybill; and potentially a certificate of origin if preferential duty rates are claimed under a trade agreement. Depending on the specific machine and its intended use, additional documentation such as technical specifications, safety certifications, or import licenses might be required by customs authorities in the importing country. Always check the specific requirements of the destination country's customs agency.
Which trade agreements commonly provide preferential duty rates for HS code 846219?
HS code 846219 benefits from various trade agreements. For instance, the notation 'Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)' indicates that goods under this code may be imported duty-free into the U.S. from countries like Australia (AU), Japan (JP), South Korea (KR), and others with whom the U.S. has free trade agreements or preferential trade arrangements. Importers should verify the specific terms and conditions of each agreement, including rules of origin, to ensure eligibility for preferential treatment.
What distinguishes HS code 846219 ('Other') from other subheadings within 8462?
HS code 846219 is a residual category for machines for working metal, powder metallurgy, or working plastics that do not fit into more specific subheadings within heading 8462. Heading 8462 covers 'Machine-tools (including machines for pressing, folding, straightening, flattening, shearing, punching or nibbing) for working metal by rolling, folding, straightening, flattening, shearing, punching or nibbing; presses for working metal or metal carbides, not being automatic presses of subheading 8462.21 or 8462.29; machines for working metal by means of copper therefor'. If a machine for working metal, powder metallurgy, or plastics does not fall under categories like bending, folding, straightening, or shearing machines, it would likely be classified as 'Other' under 846219. A thorough review of the Chapter 84 notes and the specific descriptions of the other subheadings is crucial for accurate classification.