HS 846190 Other
Quick Answer: Machines for working metal, wood, plastics, or other materials, not elsewhere specified or included, imported under HS 846190 enter the EU at 2.70% ad valorem, the UK at 0.00% ad valorem, and the US with a range of rates including 4.4% ad valorem and 30% ad valorem, with many preferential rates offering duty-free entry. This residual classification applies to machinery that does not fit into more specific headings within Chapter 84, such as metal planing, shaping, slotting, or milling machines (8461.10-8461.50). Importers and customs brokers should carefully review the specific subheadings and originating country provisions within each jurisdiction's tariff schedule to determine the precise duty rate, as significant variations exist. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8461900000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8461900000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84619030 | 4.4% | Free (17 programs) | — |
| 8461903020 | — | — | ["No."] |
| 8461903040 | — | — | ["No."] |
| 8461903060 | — | — | ["No."] |
| 8461903080 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8461.90?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846190 cover?
This subheading covers "Other" machines for working metal, including those not specified in the preceding subheadings of heading 8461. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category is a residual one for metalworking machines that do not fit into more specific classifications for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing machines. It generally includes specialized equipment for metal manipulation not otherwise enumerated.
What falls outside HS 846190?
The following products are excluded from HS 846190: machines specifically designed for planing, shaping, slotting, broaching, or for cutting, grinding, or finishing gears, as these are classified under HS 8461.10 through 8461.50. Additionally, machines for working other materials, such as wood or plastics, and general-purpose machine tools like lathes or milling machines that are not exclusively for metalworking, are classified elsewhere. For instance, a universal milling machine would not fall under this subheading.
What are common classification mistakes for HS 846190?
A common error is misclassifying specialized metalworking machinery that, while not explicitly listed in the preceding subheadings of 8461, performs functions that could be broadly interpreted as falling within those categories. For example, a machine primarily designed for cutting metal sheets using a specific process not covered by the more detailed subheadings might be incorrectly placed here. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to ensure accurate classification based on the most specific heading and subheading.
How should importers classify products under HS 846190?
The correct procedure for classifying products under HS 846190 involves a thorough examination of the machine's primary function and design. Importers and customs brokers must consult the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and review the Explanatory Notes from the WCO. If a machine's specific metalworking operation is not detailed in subheadings 8461.10 through 8461.50, and it is not classifiable under another chapter, then 8461.90 becomes the appropriate residual classification.
How is the duty calculated for products under HS 846190?
A specialized metal plate cutting machine, not otherwise specified, declared at a customs value of $15,000 USD would attract a US duty of $1,050.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.00% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS code 8461.90. The calculation is $15,000 (declared value) × 0.07 (duty rate) = $1,050.00 (duty amount).
Which trade agreements reduce duties for HS 846190?
Several free trade agreements may reduce the applicable duty rate for HS 846190, including the United States-Mexico-Canada Agreement (USMCA), which can provide for duty-free entry for qualifying originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or duty-free rates for eligible goods from certain developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A may be required, depending on the specific agreement and the exporting country.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846190, and how do preferential rates apply?
HS code 846190, designated for 'Other' machine tools for working materials by removing metal, generally has a Most Favored Nation (MFN) duty rate of 2.70% ad valorem in the United States. However, preferential rates significantly reduce or eliminate this duty for imports from countries with trade agreements. For example, imports from Australia (AU), Canada (CA), Chile (CL), South Korea (KR), and Singapore (SG) may enter duty-free. It is crucial to verify the specific preferential rate applicable to your country of origin by consulting the USITC Harmonized Tariff Schedule.
What criteria determine if a machine tool falls under the 'Other' category of HS 846190?
HS code 846190 is a residual category for machine tools designed for working materials by removing metal, which are not specifically classified under other headings within 8461 (e.g., planers, boring machines, milling machines). This includes specialized machines like gear hobbing machines, broaching machines, and certain types of grinding machines not covered elsewhere. Classification relies on the primary function of the machine and whether it operates by removing metal. If a machine does not fit the description of more specific headings within Chapter 84, and its function is to remove metal, it will likely be classified under 846190.
What documentation is typically required when importing goods classified under HS 846190?
When importing goods under HS code 846190, standard import documentation is required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the country of origin and any claimed preferential duty rates, a Certificate of Origin may be necessary. Importers should also be prepared to provide technical specifications or brochures that clearly demonstrate the machine's function and confirm it operates by removing metal, to substantiate the HS classification if requested by customs authorities.
How is the import duty calculated for HS 846190, using a hypothetical example?
The import duty for HS code 846190 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if a machine tool classified under 846190 has an invoice value of $10,000 and the applicable MFN duty rate is 2.70%, the duty amount would be calculated as: $10,000 (Value) × 0.027 (Duty Rate) = $270.00. If a preferential rate of Free (0.00%) applies due to a trade agreement, the duty would be $0.00. Always confirm the correct duty rate and valuation rules with the relevant customs authority.
Which major trade agreements offer preferential duty rates for HS code 846190 into the United States?
Several trade agreements provide preferential duty rates, often resulting in duty-free entry, for goods classified under HS code 846190 into the United States. Key agreements include the United States-Mexico-Canada Agreement (USMCA), which covers Canada and Mexico (though specific rates may vary based on rules of origin); the Central America-Dominican Republic-United States Free Trade Agreement (CAFTA-DR); and bilateral agreements with countries such as Australia (AU), Chile (CL), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Panama (PA), Peru (PE), and Singapore (SG). Importers must ensure their goods meet the rules of origin stipulated in these agreements to qualify for preferential treatment.