HS 846029 Other
Quick Answer: Machines for grinding, honing, lapping, polishing, or otherwise finishing metal or cermets, not specified elsewhere in heading 8460, imported under HS 846029 enter the UK at 0.00%, the EU at 2.70% ad valorem, and the US at 4.4% ad valorem (MFN). This residual category captures a diverse range of finishing machinery not falling under more specific subheadings within 8460. Importers should be aware that preferential rates may apply in the US for certain trading partners. CustomTariffs aggregates this data, highlighting the need for precise classification to ensure accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8460290000 | — | — | — |
| 8460291000 | 0.00 % | — | — |
| 8460299000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8460290000 | 2.70 % | — | — |
| 8460291000 | 2.70 % | — | — |
| 8460299000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8460290105 | — | — | ["No."] |
| 84602901 | 4.4% | Free (18 programs) | — |
| 8460290130 | — | — | ["No."] |
| 8460290150 | — | — | ["No."] |
| 8460290110 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8460.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 846029 cover?
This subheading covers "other" machines for working stone, ceramics, concrete, cement-type materials or like mineral materials, or for cold-working glass by hand, not elsewhere specified or included within heading 8460. According to the World Customs Organization's Harmonized System Explanatory Notes, this category is a residual one for machines that perform operations such as grinding, polishing, honing, lapping, or cutting on these specific materials, provided they are not covered by more specific subheadings within 8460 or other headings. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm this residual nature, focusing on machines not otherwise classified.
What falls outside HS 846029?
The following products are excluded from HS 846029: machines for working metal (which fall under other headings in Chapter 84), machines for working wood (heading 8465), machines for working plastics or other materials (often classified under heading 8477), and hand tools not powered by motor (which are typically classified in Chapter 82). For instance, a simple hand-held grinding stone for concrete would not be classified here, nor would a machine primarily designed for cutting glass into decorative shapes if it has a more specific classification. Machines for working stone that are primarily for excavation or demolition are also excluded.
What are common classification mistakes for HS 846029?
A common error is misinterpreting the "other" nature of this subheading, leading to the classification of machines that actually have a more specific heading or subheading. For example, machines designed for polishing concrete floors, if they incorporate specific features that align with a more detailed description in another part of the tariff schedule, should not be placed here. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 3(a) and 3(b) for goods that may appear classifiable under two or more headings or subheadings, is crucial to avoid misclassification.
How should importers classify products under HS 846029?
The correct procedure for classifying products under HS 846029 involves a thorough examination of the machine's primary function and the materials it is designed to work. Importers and customs brokers must consult the WCO Explanatory Notes for heading 8460 and the specific national tariff schedules, such as the USITC HTS or the EU TARIC, to ensure no more specific classification exists. If the machine grinds, polishes, or laps stone, ceramics, concrete, or similar mineral materials, and does not fit a more precise description, then 846029 is the appropriate classification.
How is the duty calculated for products under HS 846029?
A concrete grinding machine weighing 150 kg and declared at a customs value of $2,500 USD would attract a US duty of $125.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value: 5.0% × $2,500 = $125.00. This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for a similar machine, assuming no preferential trade agreements apply. The specific rate can vary based on the exact machine type and origin country.
Which trade agreements reduce duties for HS 846029?
Several free trade agreements may reduce the applicable duty rate for HS 846029, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The EU's Generalized Scheme of Preferences (GSP) can also offer reduced or Free duty rates for eligible goods from developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 846029?
HS code 846029 covers 'Other' grinding or polishing machines, not specified elsewhere in heading 8460. The Most Favored Nation (MFN) duty rate is typically 2.70% ad valorem. However, preferential rates under various trade agreements can significantly reduce or eliminate this duty. For example, under the US-Australia Free Trade Agreement, the rate is Free. Always consult the latest tariff schedule for the importing country to confirm applicable rates.
How is the duty calculated for HS code 846029 if the MFN rate is 2.70% and the imported machine has a value of $10,000?
The duty is calculated based on the ad valorem rate applied to the customs value of the goods. For HS code 846029 with an MFN rate of 2.70%, and an imported machine valued at $10,000, the duty calculation would be: $10,000 (customs value) × 0.0270 (duty rate) = $270.00. This amount represents the import duty payable.
What classification criteria distinguish HS code 846029 from other codes within heading 8460?
HS code 846029 is a residual category for grinding or polishing machines that do not fit into more specific subheadings within 8460. These include machines for working stone, ceramics, concrete, cement, glass, or similar mineral materials, as well as machines for working wood, cork, bone, hard rubber, hard plastics, or similar hard materials, provided they are not classified elsewhere. If a machine specifically performs surface grinding, internal grinding, external grinding, or other specialized operations detailed in other 8460 subheadings, it would be classified there. The 'Other' classification applies when the machine's primary function doesn't align with the more specific descriptions.
What documentation is typically required for importing goods under HS code 846029?
Standard import documentation for HS code 846029 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list specifying the contents of each package; and a bill of lading or air waybill for transportation. Depending on the country of origin and destination, a certificate of origin may be required, especially if claiming preferential duty rates under a trade agreement. Importers should also be prepared to provide technical specifications or brochures for the grinding or polishing machine to substantiate its classification.
Which common trade agreements offer preferential duty rates for HS code 846029, and how can importers benefit?
Several trade agreements provide preferential duty rates, often resulting in duty-free entry for goods classified under HS code 846029. Examples include agreements with countries like Australia (AU), Canada (CA), Chile (CL), Japan (JP), South Korea (KR), and Mexico (MX), among others. To benefit, importers must ensure the goods meet the Rules of Origin stipulated in the relevant trade agreement. This typically involves verifying that the machine was manufactured in the partner country or meets specific local content requirements. A valid Certificate of Origin, issued by the exporter or manufacturer and often validated by customs authorities, is crucial evidence for claiming these preferential rates at the time of import.