HS 845929 Other
Quick Answer: Machines for the boring or milling of metal, not elsewhere specified or included, imported under HS 8459.29 enter the UK at 2.00%, the EU at 2.70%, and the US at 4.2% or free for certain preferential trade partners. This residual category captures metalworking machines that do not fit into more specific headings within Chapter 84, such as those for drilling, tapping, or thread cutting. Importers should verify specific product descriptions against the detailed tariff notes for each jurisdiction to ensure correct classification. According to CustomTariffs data, significant variations in duty rates exist, particularly for US trade agreements, necessitating careful review for optimal duty management.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8459290000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8459290000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84592900 | 4.2% | Free (17 programs) | — |
| 8459290010 | — | — | ["No."] |
| 8459290040 | — | — | ["No."] |
| 8459290070 | — | — | ["No."] |
| 8459290020 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8459.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 845929 cover?
This subheading covers "other" boring or drilling machines, not specified elsewhere in heading 8459, which are designed for working metal, including metal carbides, by removing material. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category is residual for machines that do not fit the more specific descriptions of boring machines (8459.10), vertical drilling machines (8459.21), or horizontal drilling machines (8459.31). It primarily includes machines with specific functionalities not covered by the preceding subheadings, such as multi-spindle drilling machines or specialized drilling units.
What falls outside HS 845929?
The following products are excluded from HS 845929: boring machines (8459.10), vertical drilling machines (8459.21), and horizontal drilling machines (8459.31). Additionally, machines primarily designed for working wood, plastics, or other materials, as well as machines that perform multiple operations where drilling is not the principal function, are classified elsewhere. For instance, machining centers that include drilling as one of several operations would typically fall under a different heading, such as 8457. Portable hand-held drilling tools are also excluded and fall under heading 8467.
What are common classification mistakes for HS 845929?
A common error is misinterpreting the specific definitions of vertical and horizontal drilling machines under 8459.21 and 8459.31, leading to the incorrect classification of machines into the residual "other" category. Importers may also fail to consider General Interpretative Rule 3(a) of the Harmonized System, which states that the heading providing the most specific description shall be preferred. For example, a machine that is clearly a vertical drilling machine should not be classified as "other" drilling machines, even if it has some unique features.
How should importers classify products under HS 845929?
The correct procedure for classifying products under HS 845929 involves a thorough review of the machine's primary function and design against the specific descriptions in heading 8459 and its preceding subheadings. Importers and customs brokers must consult the official WCO Explanatory Notes and the national tariff schedules of the importing country, such as the USITC HTS or the EU TARIC. If a machine is not specifically described in 8459.10, 8459.21, or 8459.31, and it is a drilling machine for working metal, then 8459.29 is the appropriate classification.
How is the duty calculated for products under HS 845929?
A specific product, a "Multi-Spindle Horizontal Boring Machine," declared at a customs value of $50,000 USD, would attract a US duty. Assuming the Most Favored Nation (MFN) duty rate for this specific machine under HS 8459.29 is 3.5% ad valorem, the calculated duty would be $1,750 USD ($50,000 × 0.035). This calculation is based on the ad valorem rate applied to the declared customs value, as published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 845929?
Several free trade agreements may reduce the applicable duty rate for HS 845929, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying goods originating from Canada or Mexico can enter the United States duty-free. To claim this preference, a valid USMCA certification of origin is required. Additionally, depending on the exporting country, other agreements like the Generalized System of Preferences (GSP) might offer reduced or free entry, often requiring a GSP Form A. The specific preferential rate and documentation depend on the origin country and the terms of the applicable trade agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 8459.29?
HS code 8459.29, covering 'Other' numerically controlled drilling machines, has varying Most Favored Nation (MFN) duty rates depending on the importing country. For example, the U.S. MFN rate is 2.00% ad valorem. The EU's TARIC system may show different rates, and the UK Trade Tariff also lists specific duties. It's crucial to consult the specific tariff schedule of the destination country for the exact rate applicable at the time of import.
Which trade agreements offer preferential duty rates for HS code 8459.29?
Preferential duty rates for HS code 8459.29 are available under various trade agreements. For instance, the U.S. offers duty-free entry (Free) from countries like Australia (AU), South Korea (KR), and Singapore (SG) under specific trade pacts. The EU and UK also have preferential agreements with numerous countries, often resulting in reduced or free entry. Importers must verify eligibility and possess the required proof of origin documentation to claim these preferential rates.
How is the import duty for HS code 8459.29 calculated, and can you provide an example?
The import duty for HS code 8459.29 is typically calculated on an ad valorem basis, meaning a percentage of the declared customs value of the goods. For example, if a drilling machine classified under 8459.29 has a customs value of $10,000 and the applicable MFN duty rate is 2.00%, the import duty would be $10,000 × 0.02 = $200. Some countries might also apply specific duties based on weight or unit, so always check the specific tariff.
What documentation is typically required when importing goods under HS code 8459.29?
When importing machinery under HS code 8459.29, standard documentation includes a commercial invoice detailing the value and description of the goods, a packing list, and a bill of lading or air waybill. Depending on the origin and destination, a certificate of origin may be required to claim preferential duty rates. Technical specifications or manuals for the drilling machine might also be requested by customs authorities to verify classification.
What distinguishes HS code 8459.29 ('Other') from other drilling machine codes within heading 8459?
HS code 8459.29 is a residual category for numerically controlled drilling machines not specifically covered by more precise subheadings within 8459. Heading 8459 generally covers machine tools for boring or drilling. If a drilling machine is numerically controlled and does not fit into more specific categories like single or multi-station machines for drilling, it would likely fall under 8459.29. Accurate classification relies on the machine's specific functions and control system, referencing the WCO's Explanatory Notes to the Harmonized System is recommended for definitive guidance.