HS 845819 Other
Quick Answer: Lathes imported under HS 845819 enter the UK at 2.00%, the EU at 2.70%, and the US at a range of rates including 4.4% and duty-free for specific trade agreements. This residual category, "Other," within heading 8458 (lathes), captures any lathes not specifically classified elsewhere in the heading, typically those not numerically controlled or not designed for metalworking. Importers should carefully verify the specific type of lathe to ensure correct classification, as subheadings within 845819 can have varying duty implications. CustomTariffs aggregates this data, highlighting the importance of precise classification for accurate duty assessment across different jurisdictions.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8458190000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8458190000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 84581900 | 4.4% | Free (17 programs) | — |
| 8458190020 | — | — | ["No."] |
| 8458190050 | — | — | ["No."] |
| 8458190090 | — | — | ["No."] |
| 8458190010 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8458.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 845819 cover?
This subheading covers "other" lathes falling under HS heading 8458, which pertains to lathes (including turning centers) for working metal, excluding those specified in subheadings 8458.11 and 8458.19. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category is a residual one for lathes not specifically classified elsewhere within heading 8458. It generally includes specialized or less common types of metal-working lathes that do not fit the descriptions of automatic or numerically controlled lathes.
What falls outside HS 845819?
The following products are excluded from HS 845819: numerically controlled lathes (HS 8458.11), automatic lathes, and other lathes specifically covered by other headings within Chapter 84. For instance, machines for working wood, stone, or other hard materials, even if they perform similar turning operations, are classified under different headings. Similarly, drilling machines, milling machines, or grinding machines, which may have some turning capabilities, are not classified here. The key distinction is the primary function as a metal-working lathe.
What are common classification mistakes for HS 845819?
A common error is misclassifying lathes that are, in fact, numerically controlled (NC) or computer numerically controlled (CNC) under HS 845819. These should be classified under HS 8458.11, which specifically covers such machines. Another mistake involves classifying machines that primarily perform other operations, such as milling or grinding, even if they have a turning capability, under this residual subheading. Adherence to General Rule of Interpretation (GRI) 1 and 3 is crucial for accurate classification, ensuring the most specific heading and subheading are chosen.
How should importers classify products under HS 845819?
The correct procedure for classifying products under HS 845819 involves a thorough examination of the machine's technical specifications and intended use. Importers and customs brokers must first determine if the lathe is designed for working metal. Subsequently, they must ascertain if it is a numerically controlled or automatic lathe, which would be classified elsewhere. If it is a metal-working lathe that does not fit the specific descriptions of other subheadings within 8458, then 8458.19 is the appropriate classification. Consulting the official tariff schedule's notes and Explanatory Notes is essential.
How is the duty calculated for products under HS 845819?
A horizontal turret lathe weighing 5,000 kg and declared at a customs value of $25,000 USD would, under the USITC Harmonized Tariff Schedule (HTS) for imports from a country without a preferential trade agreement, attract a US duty of $1,250. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem (5.0% × $25,000 = $1,250). This rate is published in the USITC HTS, specifically within the tariff schedule for subheading 8458.19.
Which trade agreements reduce duties for HS 845819?
Several free trade agreements may reduce the applicable duty rate for HS 845819, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying lathes originating from Canada or Mexico can be imported duty-free. For European Union countries, the EU-US trade relationship does not currently offer such broad preferential rates for this category, but specific bilateral agreements might exist. To claim preference under USMCA, a valid Certificate of Origin or a self-certified origin statement is typically required, depending on the value and specific provisions of the agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the general import duty rate for HS code 845819?
The Most Favored Nation (MFN) duty rate for HS code 845819, which covers 'Other' horizontal lathes, is typically 3.5% ad valorem. However, specific duty rates can vary significantly based on the country of origin and applicable trade agreements. It is crucial to consult the relevant tariff schedule for the importing country, such as the US Harmonized Tariff Schedule (HTS) or the EU's TARIC database, for the precise rate applicable to your shipment.
Which preferential trade agreements offer reduced or duty-free entry for HS code 845819?
HS code 845819 benefits from preferential duty rates under various trade agreements. For example, under the US HTS, goods originating from countries such as Australia (AU), Chile (CL), South Korea (KR), and Singapore (SG) may be eligible for Free (0%) duty. The specific preferential rate depends on the country of origin and whether the goods meet the rules of origin stipulated in the respective Free Trade Agreement (FTA). Importers must possess valid proof of origin to claim these preferential rates.
How is the duty calculated for HS code 845819, and can you provide an example?
The duty for HS code 845819 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For instance, if the MFN duty rate is 3.5% and the declared value of a shipment of 'other' horizontal lathes is $100,000 USD, the calculated duty would be $100,000 USD * 0.035 = $3,500 USD. If a specific duty is applicable (e.g., per unit), the calculation would be rate × quantity. Always verify the basis of duty calculation (ad valorem, specific, or compound) with the official tariff schedule.
What documentation is required to claim preferential duty rates for HS code 845819?
To claim preferential duty rates for HS code 845819 under trade agreements, importers and customs brokers typically need to provide a Certificate of Origin (COO) or a declaration of origin issued by the exporter or producer. The specific format and content requirements for the proof of origin are detailed in the respective trade agreement. For instance, under US FTAs, a statement on the commercial invoice or a separate COO may be acceptable, provided it contains all the necessary information to demonstrate that the goods meet the rules of origin.
What distinguishes HS code 845819 ('Other') from other subheadings within HS 8458 (Lathes)?
HS code 845819 is a residual category for horizontal lathes that do not fall under more specific subheadings within HS 8458. These more specific subheadings often differentiate lathes based on their control mechanisms (e.g., numerically controlled), capabilities (e.g., for turning metal, wood, or plastics), or specific types (e.g., turret lathes, capstan lathes). If a lathe does not fit the description of a more precisely defined category within HS 8458, it is classified under 845819. A thorough review of the Chapter and Heading notes, as well as the Explanatory Notes from the World Customs Organization (WCO), is essential for accurate classification.