HS 844630 For weaving fabrics of a width exceeding 30 cm, shuttleless type
Quick Answer: Shuttleless type looms for weaving fabrics exceeding 30 cm in width enter the UK duty-free, the EU at 1.70% ad valorem, and the US with rates varying from Free to 40% ad valorem, depending on specific subheadings. This HS code specifically covers advanced weaving machinery that does not use traditional shuttles to carry the weft yarn, offering higher speeds and efficiency for textile production. Importers should consult the specific US tariff schedule for the precise duty applicable to their particular loom model. According to CustomTariffs data, understanding these jurisdictional differences is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8446300000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8446300000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 844630 | — | — | — |
| 8446301010 | — | — | ["No."] |
| 8446301030 | — | — | ["No."] |
| 8446305010 | — | — | ["No."] |
| 8446305020 | — | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8446.30?
Imports of For weaving fabrics of a width exceeding 30 cm, shuttleless type may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 844630 cover?
This subheading covers shuttleless looms designed for weaving fabrics with a width exceeding 30 centimeters. According to the World Customs Organization (WCO) Harmonized System Nomenclature, these machines are characterized by their advanced weft insertion mechanisms, such as rapier, projectile, air-jet, or water-jet systems, which replace the traditional shuttle. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that this category includes sophisticated industrial weaving machinery that operates at high speeds to produce a wide range of textiles.
What falls outside HS 844630?
The following products are excluded from HS 844630: looms with a width of 30 centimeters or less, which are classified under HS 844620. Also excluded are shuttle looms, regardless of width, as they are specifically classified under HS 844610. Furthermore, machines for knitting, lace-making, or braiding, even if they produce textile materials, are classified in other headings within Chapter 84, such as 8447. This ensures that only shuttleless weaving machines of the specified width are captured here.
What are common classification mistakes for HS 844630?
A common error is misinterpreting the "width exceeding 30 cm" criterion, leading to the incorrect classification of narrower looms. Another mistake involves confusing shuttleless looms with shuttle looms, which are distinct technologies. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. Importers must carefully verify the technical specifications of the weaving machine to ensure it meets the width requirement and is indeed a shuttleless type.
How should importers classify products under HS 844630?
The correct procedure for classifying weaving machinery under HS 844630 involves a thorough review of the product's technical specifications. Importers and customs brokers must confirm the loom's operational mechanism (shuttleless type), its fabric width capacity (exceeding 30 cm), and its intended use. Consulting the manufacturer's documentation, the WCO Explanatory Notes, and the specific tariff schedule of the importing country (e.g., USITC HTS, UK Trade Tariff) is crucial for accurate classification and to avoid potential penalties.
How is the duty calculated for products under HS 844630?
A Dornier rapier weaving machine, declared at a customs value of $50,000 USD, would attract a US duty based on its classification. Assuming a Most Favored Nation (MFN) duty rate of 2.5% ad valorem, as published in the USITC Harmonized Tariff Schedule for a similar item, the duty would be calculated as 2.5% of $50,000, resulting in a duty amount of $1,250.00 USD. This calculation is performed by applying the specified ad valorem rate to the declared customs value.
Which trade agreements reduce duties for HS 844630?
Several free trade agreements may reduce the applicable duty rate for HS 844630, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free rates for eligible goods from certain developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific jurisdiction and agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 844630 (shuttleless weaving looms exceeding 30 cm width)?
The Most Favored Nation (MFN) duty rate for HS code 844630 can vary by country. For example, under the US Harmonized Tariff Schedule (HTS), the general rate of duty is 1.70% ad valorem. However, preferential rates may apply under various trade agreements. Importers should always consult the specific tariff schedule of the importing country for the most accurate and up-to-date rates. The EU TARIC system and the UK Trade Tariff also provide detailed duty information for this code.
How is the import duty calculated for HS code 844630?
The duty for HS code 844630 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared value of the imported goods. For instance, if a shuttleless weaving loom classified under 844630 has a declared customs value of $10,000 and the applicable duty rate is 1.70%, the import duty would be $10,000 * 0.0170 = $170.00. Always ensure accurate valuation and correct application of the duty rate.
What are the key classification criteria for HS code 844630?
The primary criteria for classifying a machine under HS code 844630 are that it must be a 'shuttleless type' weaving loom and it must be designed for weaving fabrics with a width exceeding 30 cm. Shuttleless looms use methods other than traditional shuttles to insert the weft, such as rapier, projectile, air-jet, or water-jet systems. If a loom does not meet these criteria (e.g., it's a shuttle type or weaves fabrics 30 cm or less), it would be classified under a different HS code.
Are there common trade agreements that offer preferential duty rates for HS code 844630?
Yes, many trade agreements can provide preferential duty rates for goods classified under HS code 844630. For example, goods originating from countries that are part of the United States-Mexico-Canada Agreement (USMCA) or other free trade agreements the US has with partner countries may qualify for reduced or zero duty rates upon import into the US. Similarly, within the EU, goods traded between member states are generally duty-free. Importers must ensure they meet the rules of origin requirements and have the necessary documentation, such as a certificate of origin, to claim preferential treatment.
What documentation is typically required when importing machinery under HS code 844630?
When importing machinery under HS code 844630, standard import documentation is usually required, including a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and any applicable trade agreements, a certificate of origin may be necessary to claim preferential duty rates. Some countries may also require specific safety or compliance certifications for industrial machinery. It is advisable for importers and customs brokers to verify the exact documentation requirements with the customs authorities of the destination country prior to shipment.