HS 820720 Dies for drawing or extruding metal
Quick Answer: Dies for drawing or extruding metal imported under HS 820720 enter the UK at 0.00%, the EU at 2.70%, and the US at 3.9% (MFN). This HS code specifically covers tools designed for shaping metal through processes like drawing (pulling metal through a die to reduce its cross-section) and extruding (pushing metal through a die to create a desired profile). These are critical components in manufacturing, particularly for wire, tubing, and structural metal shapes. Importers should be aware that preferential trade agreements can significantly alter US duty rates, with many offering duty-free entry. CustomTariffs aggregates this data, highlighting the importance of verifying specific rates based on origin and applicable trade agreements.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8207200000 | — | — | — |
| 8207201000 | 0.00 % | — | — |
| 8207209000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8207201000 | 2.70 % | — | — |
| 8207200000 | 2.70 % | — | — |
| 8207209000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 82072000 | 3.9% | Free (18 programs) | — |
| 8207200040 | — | — | ["No.","kg"] |
| 8207200030 | — | — | ["No.","kg"] |
| 8207200070 | — | — | ["No.","kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8207.20?
Imports of Dies for drawing or extruding metal may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 820720 cover?
This subheading covers dies specifically designed for the drawing or extruding of metal. According to the World Customs Organization's Harmonized System Nomenclature, these tools are essential for shaping metal through tensile forces (drawing) or compressive forces (extruding). Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that this category includes dies used in manufacturing processes to reduce the cross-sectional area of metal or to form it into a desired shape by forcing it through an opening. Examples include dies for wire drawing and dies for extruding aluminum profiles.
What falls outside HS 820720?
The following products are excluded from HS 820720: dies for working other materials such as plastics or rubber, which would fall under different headings. Furthermore, tools that perform similar shaping functions but are not specifically dies for drawing or extruding metal, such as cutting dies or stamping dies, are classified elsewhere. For instance, dies used for cutting sheet metal are typically classified under heading 8208, and dies for molding plastics are found in heading 3926 or 8480, depending on their specific nature and function.
What are common classification mistakes for HS 820720?
A common error is misclassifying dies that are designed for processes other than drawing or extruding metal. For example, dies used for cold forming or heading of metal, which involve upsetting or shaping metal without significant elongation, may be incorrectly classified here. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the heading and any relative section or chapter notes. Importers must ensure the die's primary function aligns precisely with the definitions of drawing or extruding metal, as specified in official tariff schedules.
How should importers classify products under HS 820720?
The correct procedure for classifying dies for drawing or extruding metal involves a thorough examination of the product's design, intended use, and the specific manufacturing process it facilitates. Importers and customs brokers should consult the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and review the explanatory notes for heading 8207. Confirming that the die is exclusively designed for reducing metal's cross-section through tensile or compressive forces is paramount. If uncertainty exists, seeking a binding ruling from customs authorities is advisable.
How is the duty calculated for products under HS 820720?
A set of 10 tungsten carbide dies for drawing steel wire, each with an internal diameter of 5mm and a total declared customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value ($500 USD × 5.0% = $25.00). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule, which is the standard rate for goods imported from countries without specific preferential trade agreements.
Which trade agreements reduce duties for HS 820720?
Several free trade agreements may reduce the applicable duty rate for HS 820720, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. Additionally, the Generalized System of Preferences (GSP) may offer duty-free entry for qualifying goods from certain developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and importing country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 820720 (Dies for drawing or extruding metal)?
The Most Favored Nation (MFN) duty rate for HS code 820720 is typically 2.70% ad valorem in the United States. However, preferential rates can significantly reduce or eliminate this duty. For example, under the US-Korea Free Trade Agreement (KORUS FTA), the duty rate is Free (0.00%). Always consult the latest USITC Harmonized Tariff Schedule for the most current rates applicable to your country of origin.
How is the duty for HS code 820720 calculated? Can you provide an example?
The duty for HS code 820720 is generally calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a shipment of metal drawing dies is valued at $10,000 and the applicable MFN duty rate is 2.70%, the import duty would be $10,000 * 0.0270 = $270.00. If a preferential rate applies, such as Free, the duty would be $0.00.
What specific criteria determine if a product falls under HS code 820720?
HS code 820720 covers 'Dies for drawing or extruding metal'. This classification applies to tools, typically made of hardened steel, tungsten carbide, or diamond, designed to shape metal by forcing it through an opening (drawing) or by pushing it through a die (extruding). The key is that the primary function must be the shaping of metal through these specific processes. Tools for other shaping operations or for materials other than metal would generally be classified elsewhere.
Which trade agreements commonly offer preferential duty rates for HS code 820720 into the United States?
Several trade agreements can provide preferential duty rates for goods classified under HS code 820720 entering the United States. These include agreements with countries such as South Korea (KORUS FTA), Australia (AUSFTA), Chile (CLTCL), Singapore (SFTA), and others listed with a 'Free' rate in the USITC Harmonized Tariff Schedule. Importers must ensure they have the necessary proof of origin documentation to claim these benefits.
What documentation is typically required when importing goods under HS code 820720?
Standard documentation for importing dies for drawing or extruding metal (HS 820720) includes a commercial invoice, packing list, and bill of lading or air waybill. If claiming preferential duty rates under a Free Trade Agreement, a valid Certificate of Origin or other acceptable proof of origin, as stipulated by the specific agreement, is crucial. Depending on the material and end-use, additional certifications or permits might be required by specific government agencies.