HS 820719 Other, including parts
Quick Answer: Tools for working stone, ceramic, concrete, cementitious materials or like materials, or for working cold metal, imported under HS 820719 enter the UK at 0.00%, the EU at 2.70% ad valorem, and the US with rates varying from Free to 60% ad valorem depending on the country of origin. This subheading specifically covers "other" drilling or boring tools, including their parts, not already classified under earlier headings within 8207. Importers should carefully review the specific subheadings within each jurisdiction, particularly in the US, to determine the applicable duty rate based on the origin of the goods. CustomTariffs aggregates this data, highlighting the importance of origin-based preferential duty rates for this category.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8207190000 | — | — | — |
| 8207199000 | 0.00 % | — | — |
| 8207191000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8207190000 | 2.70 % | — | — |
| 8207199000 | 2.70 % | — | — |
| 8207191000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 82071930 | 5% | Free (17 programs) | — |
| 8207193060 | — | — | ["No."] |
| 82071960 | 2.9% | Free (18 programs) | — |
| 8207196065 | — | — | ["No."] |
| 820719 | — | — | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8207.19?
Imports of Other, including parts may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 820719 cover?
This subheading covers "Other" tools for working materials, specifically those not classified under 8207.12 (diamond-tipped) or 8207.13 (carbide-tipped). According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this category includes a wide array of specialized cutting, drilling, milling, and shaping tools, as well as their parts, designed for use with machines or hand-operated tools, when they are not made of diamond or cemented carbides. Examples include tools made from high-speed steel or other alloys for working stone, ceramics, concrete, or glass.
What falls outside HS 820719?
The following products are excluded from HS 820719: tools specifically designed for working wood (which fall under 8207.70), tools for working metal (8207.40, 8207.50, 8207.60, 8207.80), and tools with diamond or cemented carbide tips (8207.12 and 8207.13 respectively). Additionally, complete machines or implements that incorporate these tools, rather than the tools themselves, are classified separately. For instance, a complete drilling machine would not be classified here, nor would simple hand tools like hammers or screwdrivers, which are covered in other headings within Chapter 82.
What are common classification mistakes for HS 820719?
A common error is misinterpreting the material composition of the tool, leading to incorrect classification. For example, mistaking a tool with a carbide insert for a solid carbide tool, or vice versa, can result in misclassification under 8207.13 instead of 8207.19. Another frequent mistake involves classifying parts of tools separately when they should be classified with the complete tool, or failing to adhere to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes.
How should importers classify products under HS 820719?
The correct procedure for classifying products under HS 820719 involves a thorough examination of the tool's intended use, material composition, and specific design. Importers and customs brokers must consult the WCO Harmonized System Explanatory Notes and the specific national tariff schedules, such as the USITC HTS or the UK Trade Tariff, to verify the precise definition of this subheading. It is crucial to determine if the tool is designed for working materials other than wood or metal, and if it is not tipped with diamond or cemented carbide. If the tool meets these criteria, and is not specifically excluded, then 8207.19 is the appropriate classification.
How is the duty calculated for products under HS 820719?
A set of 10 high-speed steel masonry drill bits, weighing 0.5 kg and declared at a customs value of $50.00 USD, would attract a US duty of $2.50. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value of $50.00 ($50.00 × 0.05 = $2.50). This is calculated using the MFN rate published in the USITC Harmonized Tariff Schedule for HS code 8207.19.00.00.
Which trade agreements reduce duties for HS 820719?
Several free trade agreements may reduce the applicable duty rate for HS 820719, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying goods originating from Canada or Mexico can enter the United States duty-free. For example, a set of specialized stone-cutting bits manufactured in Mexico would benefit from this preferential rate. To claim this preference, a valid USMCA Certificate of Origin is typically required. Other agreements, like those with developing nations under the Generalized System of Preferences (GSP), might offer reduced rates, often requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 820719, and how do preferential rates apply?
HS code 820719 covers 'Other' interchangeable tools for use in machines, tools or hand tools, not elsewhere specified, including parts. The Most Favored Nation (MFN) duty rate in the U.S. is typically 2.70% ad valorem. However, preferential rates under various Free Trade Agreements (FTAs) can significantly reduce or eliminate these duties. For example, goods from countries like Australia (AU), Chile (CL), South Korea (KR), or Singapore (SG) may enter duty-free under specific agreements. Always verify the specific country of origin against the relevant FTA schedule.
What specific criteria determine if a tool falls under HS 820719 ('Other') rather than a more specific subheading?
HS code 820719 is a residual category. It applies to interchangeable tools designed for use with machines, tools, or hand tools that are not specifically covered by other subheadings within HS 8207 (e.g., drilling, milling, cutting, or threading tools). If a tool is not explicitly classifiable under 8207.11 (for rock drilling or boring), 8207.12 (for mining, earth boring), 8207.13 (for metalworking), or other specific 8207 subheadings, and it is an interchangeable tool, it will likely be classified under 820719. Parts of these 'other' interchangeable tools also fall under this code.
What documentation is typically required for importing goods classified under HS 820719?
For HS code 820719, standard import documentation is required, including a commercial invoice, packing list, and bill of lading or air waybill. Crucially, a Certificate of Origin may be necessary to claim preferential duty rates under an applicable Free Trade Agreement. Importers should also be prepared to provide technical specifications or product literature to substantiate the classification if requested by customs authorities, particularly to demonstrate the 'interchangeable tool' nature of the goods and their intended use.
How is the import duty for HS 820719 calculated, using a concrete example?
The duty for HS 820719 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if you import interchangeable tools classified under 820719 with a declared customs value of $10,000 USD and the applicable MFN duty rate is 2.70%, the duty calculation would be: $10,000 (Value) × 0.0270 (Duty Rate) = $270.00 (Duty Amount). If a preferential rate of 0% applies, the duty would be $0.00.
Which common trade agreements offer preferential duty rates for HS 820719, and what are the general benefits?
Several trade agreements can provide preferential duty rates for HS 820719. For example, the United States has FTAs with countries such as Australia (AU), Chile (CL), South Korea (KR), and Singapore (SG), among others listed with 'Free' access. The benefit of these agreements is a reduction or elimination of the standard MFN duty rate, leading to lower landed costs for importers. To utilize these benefits, importers must ensure the goods meet the rules of origin stipulated in the specific agreement and possess the required proof of origin, often a Certificate of Origin.