HS 820190 Other hand tools of a kind used in agriculture, horticulture or forestry
Quick Answer: Tools for agriculture, horticulture, or forestry not otherwise specified under HS 820190 enter the UK duty-free, the EU at 1.70% ad valorem, and the US with varied rates including free for certain trade agreements and specific duties plus ad valorem for others. This classification covers a broad range of hand-operated implements designed for tasks such as digging, pruning, or clearing land, excluding items like spades, forks, or axes which have their own specific codes. Importers should verify the exact duty rate applicable to their specific country of destination and any applicable trade agreements, as US rates can be complex. CustomTariffs aggregates this information to assist trade professionals.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8201900000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8201900000 | 1.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8201903000 | 2¢ each + 5.1% | Free (17 programs) | ["No."] |
| 820190 | — | — | — |
| 8201906000 | Free | — | ["No."] |
| 8201904000 | Free | — | ["No."] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8201.90?
Imports of Other hand tools of a kind used in agriculture, horticulture or forestry may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 820190 cover?
This subheading covers other hand tools specifically designed for use in agriculture, horticulture, or forestry that are not classified under preceding subheadings within HS 8201. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, this includes items like grub hoes, scythes, sickles, and billhooks, provided they are operated by hand. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm this broad scope for tools performing manual tasks in these sectors, excluding powered machinery.
What falls outside HS 820190?
The following products are excluded from HS 820190: powered agricultural, horticultural, or forestry machinery (which fall under Chapter 84), general-purpose hand tools not specifically for these sectors (e.g., hammers, screwdrivers, which are in other headings of Chapter 82), and specialized tools for other trades. For instance, a power tiller for gardening would be classified elsewhere, as would a simple garden trowel if it doesn't meet the specific design criteria for agricultural or forestry use as defined by the WCO.
What are common classification mistakes for HS 820190?
A common error is misclassifying powered tools as manual ones, or vice versa, failing to adhere to the General Rules for the Interpretation of the Harmonized System (GRI) Rule 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes. Another mistake is classifying general-purpose tools that happen to be used in agriculture but are not specifically designed for it, leading to incorrect duty rates and potential penalties.
How should importers classify products under HS 820190?
The correct procedure for classifying products under HS 820190 involves a detailed examination of the tool's design, intended use, and operational mechanism. Importers and customs brokers must consult the official tariff schedules of the importing country, such as the USITC HTS or the EU TARIC, and cross-reference with the WCO Explanatory Notes. If the tool is manually operated and specifically designed for agricultural, horticultural, or forestry tasks, and not covered by a more specific subheading, then 8201.90 is likely appropriate.
How is the duty calculated for products under HS 820190?
A billhook weighing 1.5 kg and declared at a customs value of $50.00 USD would attract a US duty of $3.75. This is calculated using the Most Favored Nation (MFN) duty rate of 7.5% ad valorem applied to the declared value ($50.00 × 0.075 = $3.75). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for HS code 8201.90.0000.
Which trade agreements reduce duties for HS 820190?
Several free trade agreements may reduce the applicable duty rate for HS 820190, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries. To claim these preferences, a valid Certificate of Origin or a self-certified origin declaration, as specified by the importing jurisdiction's customs authority, is typically required.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 820190, covering 'Other hand tools of a kind used in agriculture, horticulture or forestry'?
The Most Favored Nation (MFN) duty rate for HS code 820190 can vary. For example, under the US Harmonized Tariff Schedule (HTS), the general rate is 1.70% ad valorem. However, preferential rates are available for countries with trade agreements. For instance, goods from Australia (AU), Chile (CL), South Korea (KR), and Singapore (SG) may enter duty-free under specific agreements. Always consult the latest HTS or relevant trade agreement annexes for precise rates applicable to your country of origin.
How is the duty calculated for HS code 820190 if it involves a combination of specific and ad valorem duties?
Some entries under HS 820190 might have a duty calculation that combines a specific rate per unit with an ad valorem percentage. For example, a hypothetical rate could be '2¢ each + 5.1% ad valorem'. If you import 100 units of such a tool valued at $500 total, the duty would be calculated as: (100 units * $0.02/unit) + (5.1% * $500) = $2.00 + $25.50 = $27.50. The specific component is applied per item, and the ad valorem component is applied to the total value of the imported goods.
What criteria distinguish tools classified under HS 820190 from other hand tool classifications?
HS code 820190 is specifically for 'Other hand tools of a kind used in agriculture, horticulture or forestry' that are not elsewhere specified within Chapter 82. Key classification criteria include the tool's primary intended use (agriculture, horticulture, or forestry), its manual operation (hand-powered), and its form factor. Tools like specialized pruning saws, grub hoes, tree felling axes, and certain types of cultivators would generally fall under this code if they are not covered by more specific subheadings, such as those for shovels, spades, or sickles. The WCO's Explanatory Notes to Chapter 82 provide further guidance on the scope of these tools.
Are there specific documentation requirements for importing goods under HS code 820190?
While standard import documentation such as a commercial invoice, packing list, and bill of lading are always required, importers and customs brokers should be aware of potential additional requirements for HS 820190. Depending on the country of origin and the specific tool, a Certificate of Origin may be necessary to claim preferential duty rates under trade agreements. Furthermore, if the tools are intended for commercial agricultural use, some countries might require declarations regarding compliance with certain safety or environmental standards, although this is less common for basic hand tools. Always verify the specific import regulations of the destination country.
Which major trade agreements commonly offer preferential duty rates for HS code 820190?
Several trade agreements can provide reduced or zero duty rates for HS code 820190. For imports into the United States, agreements like the USMCA (United States-Mexico-Canada Agreement) might offer preferential treatment for qualifying goods from Canada and Mexico. The US also has agreements with countries like Chile, Singapore, and South Korea that can result in duty-free entry. For imports into the European Union, the EU's Common Customs Tariff (TARIC) database will detail preferential rates under agreements with countries such as Switzerland, Norway, and various ACP (African, Caribbean, and Pacific) states. Similarly, the UK Trade Tariff reflects preferences under the UK's global trade deals. Importers must ensure their goods meet the rules of origin stipulated in the relevant trade agreement to benefit from these rates.