HS 810999 Other
Quick Answer: Zirconium and articles thereof, not elsewhere specified or included, imported under HS 810999 enter the UK at 0.00%, the EU at 9.00% ad valorem, and the US at rates ranging from Free to 45% ad valorem depending on the country of origin. This residual classification applies to zirconium products that do not fit into more specific headings within Chapter 81 of the Harmonized System, such as unwrought zirconium, waste and scrap, or powders. Importers should carefully verify the specific product composition and origin to ensure correct classification and duty assessment, as the US tariff schedule offers preferential rates for certain trading partners. According to CustomTariffs data, understanding these varying rates is crucial for accurate landed cost calculations.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8109990000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8109990000 | 9.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8109990000 | 3.7% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8109.99?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 810999 cover?
This subheading covers "other" zirconium and articles thereof, including waste and scrap, not specifically enumerated in preceding subheadings of heading 8109. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, this residual category is for zirconium products that do not fit into categories like unwrought zirconium, powders, bars, rods, profiles, plates, sheets, strip, wire, or tubes. For instance, certain specialized zirconium alloys or finished articles not otherwise classified would fall here, provided they are primarily of zirconium.
What falls outside HS 810999?
The following products are excluded from HS 810999: unwrought zirconium, powders, bars, rods, and profiles of zirconium, as well as plates, sheets, strip, and wire of zirconium. Also excluded are tubes, pipes, and their fittings of zirconium, and waste and scrap of zirconium. For example, zirconium alloys where zirconium is not the principal element by weight, or finished goods like zirconium oxide ceramics, would be classified under different headings based on their specific composition and function, not under this residual subheading for pure or primarily zirconium articles.
What are common classification mistakes for HS 810999?
A common error is misclassifying zirconium alloys or finished articles made from zirconium. Importers may incorrectly assign items to HS 810999 when they should be classified under headings for specific alloys (if zirconium is not the principal element) or under Chapter 69 for ceramic products if the zirconium is in the form of oxide or other compounds and forms a ceramic article. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial.
How should importers classify products under HS 810999?
The correct procedure for classifying products under HS 810999 involves a thorough examination of the product's composition and form. Importers and customs brokers must first consult the WCO Harmonized System Explanatory Notes and relevant national tariff schedules, such as the USITC Harmonized Tariff Schedule (HTS) or the EU's TARIC database. If the product is primarily zirconium and does not fit any more specific subheading within heading 8109, then HS 810999 is the appropriate classification. Verification of the material's percentage composition is often necessary.
How is the duty calculated for products under HS 810999?
A shipment of 100 kg of zirconium wire, declared at a customs value of $5,000 USD, would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value. The calculation is: 5.0% of $5,000 USD = $250.00. This rate is published in the USITC Harmonized Tariff Schedule, specifically under HTS subheading 8109.99.90, which applies to "Other" zirconium articles.
Which trade agreements reduce duties for HS 810999?
Several free trade agreements may reduce the applicable duty rate for HS 810999, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the United States duty-free. To claim this preference, a valid USMCA certification of origin is required. Additionally, certain developing countries may benefit from the Generalized System of Preferences (GSP) for US imports, potentially offering reduced or free entry, requiring a GSP Form A. For EU imports, agreements with countries like Switzerland might offer preferential rates, often requiring an EUR.1 movement certificate.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the general Most Favored Nation (MFN) import duty rate for HS code 810999?
The MFN duty rate for HS code 810999, which covers 'Other' zirconium and articles thereof, is 4.5% ad valorem. This rate applies to imports from countries that do not have a specific preferential trade agreement with the importing country. For example, if a product valued at $10,000 is imported under this code, the MFN duty would be $10,000 \times 4.5% = $450.
What preferential duty rates are available for HS code 810999, and which countries benefit?
Preferential duty rates for HS code 810999 can significantly reduce or eliminate import duties. For instance, under certain trade agreements, countries such as Australia (AU), Canada (CA), Chile (CL), South Korea (KR), and Singapore (SG) may benefit from Free (0.00%) or reduced duty rates. Importers should consult the specific tariff schedule of the importing country and the relevant Free Trade Agreement (FTA) text to confirm eligibility and required documentation, such as a Certificate of Origin.
How is HS code 810999 classified, and what are common pitfalls?
HS code 810999 is a residual category for zirconium and articles thereof that do not fit into more specific subheadings within heading 8109. Classification hinges on the product being primarily composed of zirconium and not being specifically enumerated elsewhere in the tariff schedule. Common pitfalls include misclassifying zirconium alloys, compounds, or finished articles (like zirconium oxide ceramics) that might have their own specific HS codes. Always verify that the product is not classifiable under a more precise description before using this residual code.
What documentation is typically required for importing goods under HS code 810999, especially when claiming preferential treatment?
Standard import documentation for HS code 810999 includes a commercial invoice, packing list, and bill of lading/air waybill. When claiming preferential duty rates under a trade agreement, a valid Certificate of Origin is usually mandatory. This document certifies that the goods meet the rules of origin stipulated in the agreement. Some agreements may also require specific declarations or proof of shipment. Consult the relevant trade agreement and the importing country's customs regulations for precise requirements.
Can you provide an example of how a preferential duty rate for HS code 810999 is applied, using a specific trade agreement?
Consider a scenario where a product classified under HS code 810999 originates from a country that has a Free Trade Agreement (FTA) with the importing nation, granting a 0.00% duty rate. If a shipment of zirconium articles valued at $5,000 is imported under this agreement, and the importer provides a valid Certificate of Origin, the duty calculation would be $5,000 \times 0.00% = $0.00. This demonstrates the significant cost savings achievable through preferential trade agreements.