HS 810890 Other
Quick Answer: Titanium and articles thereof, not elsewhere specified under HS 810890, enter the UK at 6.00%, the EU at 7.00%, and the US with a range of rates including Free for several preferential trade partners and 5.5% for others. This residual classification applies to titanium and its articles that do not fit into more specific subheadings within Chapter 81, such as unwrought titanium, powders, or bars and rods. Importers should carefully review specific product descriptions and origin to determine the precise duty applicable, as rates can vary significantly. CustomTariffs aggregates this information to assist trade professionals.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8108900000 | — | — | — |
| 8108903000 | 6.00 % | — | — |
| 8108903010 | 6.00 % | — | — |
| 8108903015 | 6.00 % | — | — |
| 8108903045 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8108903000 | 7.00 % | — | — |
| 8108903015 | 7.00 % | — | — |
| 8108903045 | 7.00 % | — | — |
| 8108903060 | 7.00 % | — | — |
| 8108903090 | 7.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 81089030 | 5.5% | Free (17 programs) | — |
| 8108903030 | — | — | ["kg"] |
| 8108903060 | — | — | ["kg"] |
| 81089060 | 15% | Free (18 programs) | — |
| 8108906031 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8108.90?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 810890 cover?
This subheading covers other articles of titanium, not elsewhere specified within Heading 8108. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this includes finished or semi-finished titanium products that do not fit into the more specific categories of unwrought titanium, powders, bars, rods, profiles, wire, plates, sheets, strip, foil, tubes, pipes, and fittings. For instance, this could encompass titanium fasteners, screws, bolts, nuts, and certain fabricated titanium components not covered by other headings.
What falls outside HS 810890?
The following products are excluded from HS 810890: unwrought titanium, titanium powders and flakes, titanium bars, rods, and profiles, titanium wire, titanium plates, sheets, strip, and foil (whether or not cut to shape, and whether or not clad), and titanium tubes, pipes, and their fittings. For example, titanium screws specifically designed for medical implants would likely be classified under Chapter 90, and titanium alloys with significant other metal content might fall under different headings depending on the primary metal.
What are common classification mistakes for HS 810890?
A common error is misclassifying titanium articles that have specific uses or are made of alloys that should be classified elsewhere. For instance, titanium articles that are primarily functional as parts of machinery or mechanical appliances might be classified under Chapter 84 or 85, not 8108. Furthermore, misunderstanding the precise definitions of "bars," "rods," and "profiles" as outlined in the General Rules for the Interpretation of the Harmonized System (GRI) can lead to incorrect classification of semi-finished products.
How should importers classify products under HS 810890?
The correct procedure for classifying titanium articles under HS 810890 involves a thorough examination of the product's material composition, form, and intended use, referencing the WCO HS Explanatory Notes and specific national tariff schedules like the USITC HTS or EU TARIC. Importers must first attempt to classify the product under the most specific heading and subheading. If the article is made of titanium and does not fit into any of the more specific subheadings of 8108, then 810890 becomes the appropriate classification.
How is the duty calculated for products under HS 810890?
A titanium alloy bolt weighing 0.5 kilograms and declared at a customs value of $50.00 USD would attract a US duty of $1.50. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the customs value ($50.00 × 0.03 = $1.50). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule (HTS) for subheading 810890.00.00, assuming no other factors apply.
Which trade agreements reduce duties for HS 810890?
Several free trade agreements may reduce the applicable duty rate for HS 810890, including the United States-Mexico-Canada Agreement (USMCA), which can result in a "Free" duty rate for originating goods from Canada and Mexico, requiring a self-certified origin statement. The Generalized System of Preferences (GSP) may also offer reduced or "Free" duties for originating goods from certain developing countries, often requiring a GSP Form A. The specific preferential rate and documentation requirements vary by country and agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 810890?
The Most Favored Nation (MFN) duty rate for HS code 810890, which covers 'Other' titanium and articles thereof, typically stands at 6.00% ad valorem in the United States. However, preferential duty rates are available for countries with trade agreements. For instance, under the US-Australia Free Trade Agreement (AU), titanium articles classified under 810890 may enter duty-free. Always consult the latest Harmonized Tariff Schedule of the United States (HTSUS) for the most current rates and specific country exceptions.
How is the duty calculated for HS 810890?
Duty for HS code 810890 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the imported goods. For example, if a shipment of titanium articles classified under 810890 has a customs value of $10,000 and the MFN duty rate is 6.00%, the import duty would be $10,000 × 0.06 = $600. Some specific items under this code might have alternative or additional duties, so verifying the HTSUS is crucial.
What are the classification criteria for HS 810890?
HS code 810890 is a residual category for titanium and articles thereof that are not specifically enumerated in other subheadings of heading 8108. This includes, but is not limited to, unwrought titanium, powders, bars, rods, angles, shapes, sections, plates, sheets, strip, wire, tubes, pipes, and certain finished or semi-finished articles of titanium. If an article made of titanium does not fit into a more specific HS code within 8108 (e.g., specific forms of waste and scrap, or specific types of tubes and pipes), it will likely be classified under 810890.
What documentation is typically required for importing goods under HS 810890?
When importing goods classified under HS 810890, standard import documentation is usually required. This includes a commercial invoice detailing the value, quantity, and description of the titanium articles; a packing list; and a bill of lading or air waybill. Depending on the origin and specific nature of the goods, a certificate of origin may be necessary to claim preferential duty rates under trade agreements. Importers should also be prepared to provide technical specifications or product data sheets if requested by U.S. Customs and Border Protection (CBP) to verify classification.
Which trade agreements offer preferential duty rates for HS 810890?
Several trade agreements can provide preferential duty rates for goods classified under HS 810890. For example, the United States has agreements with countries like Australia (AU), Chile (CL), South Korea (KR), and Singapore (SG) that may offer reduced or free entry for eligible titanium articles. The specific preferential rate and eligibility criteria depend on the origin of the goods and the terms of each agreement. Importers must ensure they have the correct documentation, such as a valid certificate of origin, to claim these benefits. Consult the HTSUS, specifically Chapter 81 and the notes related to preferential trade programs, for detailed information.