HS 800700 Plates, sheets and strip, of a thickness exceeding 0,2 mm
Quick Answer: Plates, sheets, and strip of tin, exceeding 0.2 mm in thickness, enter the UK and EU duty-free, while imports into the US face rates ranging from free to 40% ad valorem, depending on origin. This classification specifically applies to these forms of tin that are thicker than a standard sheet of paper. Importers should be aware of the significant duty variations in the US market, necessitating careful review of preferential trade agreements and origin documentation. According to CustomTariffs data, understanding these rates is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8007001000 | 0.00 % | — | — |
| 8007008000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 8007001000 | 0.00 % | — | — |
| 8007008000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 80070010 | 2.1% | Free (17 programs) | — |
| 8007001050 | — | — | ["No."] |
| 800700 | — | — | — |
| 8007001010 | — | — | ["No."] |
| 8007002000 | 2.4% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 8007.00?
Imports of Plates, sheets and strip, of a thickness exceeding 0,2 mm may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 800700 cover?
This subheading covers tin and articles thereof, specifically in the form of plates, sheets, and strip, where the thickness of the material exceeds 0.2 mm. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category is distinct from thinner foils or other forms of tin articles. For instance, the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database define this category based on the specified thickness threshold, ensuring consistent classification of rolled tin products.
What falls outside HS 800700?
The following products are excluded from HS 800700: tin in forms other than plates, sheets, or strip, such as ingots, powders, or bars; tin articles with a thickness of 0.2 mm or less, which are typically classified as foil under other subheadings; and composite materials where tin is not the predominant component. For example, tin-plated steel sheets or tin-coated wire are classified based on the base material or under specific composite material headings, not under this pure tin subheading.
What are common classification mistakes for HS 800700?
A common error is misinterpreting the thickness requirement, leading to the classification of tin products thinner than 0.2 mm under this subheading, or conversely, classifying thicker items incorrectly. General Interpretative Rule 1 (GIR 1) of the Harmonized System emphasizes that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. Importers may also err by not considering the material's composition, classifying tin alloys or tin-plated items as pure tin under HS 800700.
How should importers classify products under HS 800700?
The correct procedure for classifying products under HS 800700 involves a precise measurement of the material's thickness. Importers and customs brokers must verify that the tin product is indeed in the form of plates, sheets, or strip and that its thickness definitively exceeds 0.2 mm. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing the explanatory notes for Chapter 80 are crucial steps to ensure accurate classification.
How is the duty calculated for products under HS 800700?
A 100 kg shipment of pure tin sheets, each measuring 0.5 mm in thickness and declared at a customs value of $3,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($3,000 USD × 5.0% = $150.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 800700.
Which trade agreements reduce duties for HS 800700?
Several free trade agreements may reduce the applicable duty rate for HS 800700, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating tin plates, sheets, and strip from Canada and Mexico can be imported duty-free. To claim this preference, a self-certified origin statement on the invoice or a separate certificate of origin is typically required. Other agreements may offer reduced rates depending on the origin country and specific product qualifications.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 800700 (Plates, sheets, and strip, of tin, exceeding 0.2 mm thickness)?
The Most Favored Nation (MFN) duty rate for HS code 800700 is typically 0.00% ad valorem in many major economies, including the United States. However, specific rates can vary by country. For example, the EU TARIC system may list a rate of 2.1% ad valorem, while the UK Trade Tariff might show a standard rate of 1.5% ad valorem. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate applicable to your shipment. Always verify the rate in the official tariff database of the destination country, such as the USITC's Harmonized Tariff Schedule, the EU's TARIC database, or the UK's Trade Tariff.
How is the classification of tin plates, sheets, and strip under HS 800700 determined?
Classification under HS code 800700 is primarily determined by the material (tin) and its physical form (plates, sheets, or strip) along with its thickness. The key criterion is that the thickness must exceed 0.2 mm. If the material is tin and its form is a plate, sheet, or strip, and its thickness is greater than 0.2 mm, it falls under this heading. If the thickness is 0.2 mm or less, it would be classified under a different heading, likely 8007.00.10 for foil. Always refer to the General Rules for the Interpretation of the Harmonized System (GRI) and any relevant Explanatory Notes for precise classification guidance.
What documentation is typically required for importing tin plates, sheets, and strip under HS 800700?
Standard import documentation for HS code 800700 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the country of origin and destination, a certificate of origin may be required, especially if preferential duty rates are being claimed under a trade agreement. For tin products, specific country regulations might also necessitate declarations regarding the origin of the tin or compliance with environmental standards. Importers and customs brokers should confirm specific requirements with the customs authority of the importing country.
Which trade agreements commonly offer preferential duty rates for tin plates, sheets, and strip (HS 800700)?
Preferential duty rates for HS code 800700 are often available under various Free Trade Agreements (FTAs). For instance, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada or Mexico may receive preferential treatment. Similarly, the EU has FTAs with numerous countries that could provide reduced or zero duty rates. The specific preferential rates and eligibility criteria (e.g., rules of origin) are detailed within each trade agreement. Examples of countries that might benefit from preferential rates under various agreements include Australia (AU), South Korea (KR), and Singapore (SG), as indicated by potential tariff codes like 'Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)' which suggests zero duty under specific trade pacts. Always verify the origin of the goods and the applicable FTA rules.
How is the import duty calculated for HS 800700 if the duty rate is 2.1% ad valorem and the shipment value is $50,000?
The import duty for HS code 800700, when subject to an ad valorem rate, is calculated as a percentage of the customs value of the imported goods. For example, if the duty rate is 2.1% ad valorem and the customs value of the tin plates, sheets, and strip is $50,000, the duty amount would be calculated as follows: Duty = Customs Value × Duty Rate. Duty = $50,000 × 2.1% = $50,000 × 0.021 = $1,050. Therefore, the import duty payable would be $1,050. Ensure that the customs value used for calculation is the correct dutiable value, which typically includes the cost of goods, insurance, and freight (CIF) up to the point of importation, as per the importing country's valuation rules.