HS 790700 Iron, steel and/or zinc alloy weights:-with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,-whether or not with parts of other material,-whether or not with parts of other metals,-whether or not surface treated,-whether or not printed,of a kind used for the production of remote controls
Quick Answer: Iron, steel, and/or zinc alloy weights, not exceeding 500 grams and measuring no more than 107 mm x 107 mm x 11 mm, used in the production of remote controls, enter the US at 3% MFN, the EU at 5.00% ad valorem, and the UK at 0.00% ad valorem. This classification covers these specific metallic components, regardless of whether they incorporate parts of other materials or metals, or are surface treated or printed. Importers should consult specific trade agreements for potential duty-free entry into the US. CustomTariffs aggregates this tariff data for compliance planning.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7907000010 | 0.00 % | — | — |
| 7907000090 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7907000010 | 5.00 % | — | — |
| 7907000090 | 5.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 790700 | — | — | — |
| 7907002000 | 3% | Free (17 programs) | ["kg"] |
| 7907001000 | 3% | Free (17 programs) | ["kg"] |
| 7907006000 | 3% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7907.00?
Imports of Iron, steel and/or zinc alloy weights:-with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,-whether or not with parts of other material,-whether or not with parts of other metals,-whether or not surface treated,-whether or not printed,of a kind used for the production of remote controls may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 790700 cover?
This subheading covers specific weights made of iron, steel, and/or zinc alloys, designed for use in the production of remote controls. According to the World Customs Organization (WCO) Harmonized System Nomenclature, these weights must not exceed 500 grams in weight and must measure no more than 107 mm x 107 mm x 11 mm. They may incorporate parts made of other materials or metals, and can be surface treated or printed, as long as their primary function is for remote control manufacturing. The USITC Harmonized Tariff Schedule (HTS) and EU TARIC database provide detailed interpretations aligning with these criteria.
What falls outside HS 790700?
The following products are excluded from HS 790700: weights that exceed the specified dimensions (500 grams or 107 mm x 107 mm x 11 mm), weights not intended for remote control production, and weights where the iron, steel, or zinc alloy is not the principal material. For instance, a large counterweight for industrial machinery, or a decorative paperweight, would be classified elsewhere. Similarly, components of remote controls that are not specifically weights, such as circuit boards or plastic casings, are classified under different headings.
What are common classification mistakes for HS 790700?
A common error is misinterpreting the primary material or intended use. If a weight is primarily made of a material other than iron, steel, or zinc alloy, or if it is not clearly intended for remote control production, it should not be classified under 790700. For example, a weight for a different electronic device or a general-purpose industrial weight would fall under a different HS code. Adherence to General Rule of Interpretation (GRI) 1, which states that classification is determined by the terms of the headings and any relative section or chapter notes, is crucial.
How should importers classify products under HS 790700?
The correct procedure for classifying products under HS 790700 involves a thorough examination of the product's physical characteristics and intended application. Importers and customs brokers must verify that the weight does not exceed 500 grams and its dimensions are within 107 mm x 107 mm x 11 mm. Confirmation of the primary material composition (iron, steel, and/or zinc alloy) and its specific use in remote control manufacturing is essential. Consulting the official tariff schedules of the importing country, such as the USITC HTS or EU TARIC, is a critical step.
How is the duty calculated for products under HS 790700?
A set of 100 small zinc alloy weights, each weighing 15 grams, for remote controls, declared at a customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($500 USD × 5.0% = $25.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 7907.00.0000.
Which trade agreements reduce duties for HS 790700?
Several free trade agreements may reduce the applicable duty rate for HS 790700, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of "Free" for qualifying goods originating from Canada or Mexico. Additionally, preferential rates may be available under other agreements for goods originating from countries benefiting from the Generalized System of Preferences (GSP). To claim preference under USMCA, a valid Certificate of Origin is typically required. For GSP, a Form A is often necessary, depending on the importing country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 790700, specifically for weights used in remote control production?
The Most Favored Nation (MFN) duty rate for HS code 790700, covering specific iron, steel, and/or zinc alloy weights for remote controls, can vary. For instance, the United States applies a 5.00% ad valorem duty. Other countries may have different rates; for example, the UK Trade Tariff indicates a 0.00% duty for goods from certain countries under specific trade agreements. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate.
What are the key classification criteria for HS code 790700?
To be classified under HS code 790700, the article must meet several precise criteria: it must be an iron, steel, and/or zinc alloy weight. Furthermore, it must not exceed a weight of 500 grams and must measure not more than 107 mm x 107 mm x 11 mm. The presence of parts made of other materials or other metals, surface treatments, printing, or being intended for the production of remote controls does not preclude classification, provided the primary material and dimensional/weight specifications are met.
How is the import duty calculated for HS code 790700, using a hypothetical scenario?
Import duty calculation for HS code 790700 is typically based on the ad valorem (value-based) system. For example, if the MFN duty rate is 5.00% and the declared customs value of a shipment of these weights is $10,000 USD, the duty amount would be calculated as: 5.00% of $10,000 USD = $500 USD. Importers and brokers must ensure accurate valuation and apply the correct duty rate based on the country of origin and applicable trade agreements.
Which common trade agreements offer preferential duty rates for goods classified under HS code 790700?
Several trade agreements can provide preferential duty rates for goods classified under HS code 790700. For example, the United States has agreements like the USMCA (United States-Mexico-Canada Agreement) which may offer reduced or zero duties for qualifying goods originating from Canada or Mexico. The EU TARIC system and the UK Trade Tariff list numerous preferential rates under agreements with countries such as Australia (AU), South Korea (KR), and Singapore (SG), often resulting in 'Free' or significantly reduced duties. Importers should verify eligibility and origin requirements for each specific agreement.
What documentation is typically required for importing goods under HS code 790700?
When importing goods classified under HS code 790700, standard import documentation is usually required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim preferential duty rates under trade agreements, a Certificate of Origin (COO) or a declaration of origin, compliant with the specific agreement's rules, is essential. Importers should also be prepared to provide technical specifications or evidence confirming the goods meet the dimensional and weight criteria for this specific HS code.