HS 761691 Other
Quick Answer: Aluminum articles imported under HS 761691 enter the UK at 6.00%, the EU at 6.00%, and the US at 2.5% or free for qualifying trade agreements. This residual classification applies to "other" articles of aluminum not specifically enumerated in preceding headings of Chapter 76 of the Harmonized System. It encompasses a broad range of aluminum goods, such as certain aluminum foil products not covered elsewhere, aluminum wire not for electrical insulation, and various aluminum components or finished articles that do not fit more specific descriptions. Importers should carefully review the specific nature of their aluminum goods to ensure this classification is appropriate, as misclassification can lead to penalties. According to CustomTariffs data, the US offers significant duty-free access for eligible trading partners under this code.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616910000 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616910000 | 6.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616910000 | 2.5% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7616.91?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 761691 cover?
This subheading covers "other" articles of aluminum, specifically those not elsewhere specified within heading 7616. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this includes a broad range of fabricated aluminum items. For instance, the United States International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the European Union's TARIC database provide further clarification, generally encompassing items like aluminum foil not exceeding 0.2 mm in thickness, aluminum wire not insulated, and various small aluminum parts and fittings not covered by more specific headings, provided they are not primarily for use in machinery or vehicles.
What falls outside HS 761691?
The following products are excluded from HS 761691: articles of aluminum specifically enumerated in other headings of Chapter 76, such as foil, wire, tubes, pipes, or structures. Furthermore, articles of aluminum that are parts of machines, appliances, or vehicles are typically classified under their respective chapters. For example, aluminum screws and bolts are classified under Chapter 73 or 74 depending on their material, and aluminum components for aircraft would fall under Chapter 88. The key is whether the article has a more specific classification elsewhere in the tariff schedule.
What are common classification mistakes for HS 761691?
A common error is misclassifying aluminum articles that have a more specific heading or subheading. For instance, aluminum foil of a certain thickness, or aluminum wire intended for electrical insulation, would not fall under this "other" category. General Interpretative Rule 1 (GIR 1) dictates that classification shall be determined according to the terms of the headings and any relative section or chapter notes. Importers may also incorrectly classify finished goods containing aluminum components under 761691, when they should be classified based on their primary function or material as per GIR 3.
How should importers classify products under HS 761691?
The correct procedure for classifying products under HS 761691 involves a systematic approach. First, determine if the article is made of aluminum. Second, consult the WCO Harmonized System Explanatory Notes and the specific tariff schedules of the importing country (e.g., USITC HTS, EU TARIC, UK Trade Tariff). Third, check if the article is specifically provided for in any other heading or subheading of Chapter 76 or other chapters. If it is not, and it is a fabricated article of aluminum, then HS 761691 is likely the correct classification.
How is the duty calculated for products under HS 761691?
A specific product, such as 100 kilograms of aluminum washers not exceeding 0.2 mm in thickness, declared at a customs value of $500 USD, would attract a US duty. Assuming a Most Favored Nation (MFN) duty rate of 3.5% ad valorem for this hypothetical scenario, the duty would be calculated as 3.5% of $500 USD, resulting in a duty amount of $17.50. This calculation is based on the ad valorem rate applied to the declared customs value, as published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 761691?
Several free trade agreements may reduce the applicable duty rate for HS 761691, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods may be eligible for Free entry. The top origin countries benefiting from such preferential rates for aluminum articles often include Canada and Mexico. To claim preference under USMCA, a valid Certificate of Origin or a self-certified origin statement meeting specific requirements is typically required by US Customs and Border Protection (CBP).
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 761691?
HS code 761691, which covers 'Other articles of aluminum, not elsewhere specified or included', has varying duty rates depending on the importing country and trade agreements. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) rate is 6.00% ad valorem. The EU's TARIC system may have different rates, and the UK Trade Tariff also lists specific duties. It is crucial to consult the specific tariff schedule of the destination country for the most accurate and up-to-date rates.
How are preferential duty rates applied to HS code 761691?
Preferential duty rates for HS code 761691 are available to goods imported from countries with which the destination country has a Free Trade Agreement (FTA) or other preferential trade arrangements. For instance, the US HTS lists a rate of Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) for certain origins, indicating duty-free entry under specific preferential programs. To claim these rates, importers must provide proof of origin and meet all other requirements stipulated by the respective trade agreement.
What are the classification criteria for HS code 761691?
HS code 761691 is a residual category for aluminum articles that are not specifically classified under other headings within Chapter 76 of the Harmonized System. This means that if an aluminum article does not fit into more specific codes (e.g., aluminum foil, aluminum wire, aluminum tubes, aluminum structures), it will likely be classified under 761691. Classification relies on the material (aluminum) and the fact that the article's specific nature or function is not covered elsewhere. The World Customs Organization (WCO) Harmonized System Explanatory Notes provide guidance on the scope of this heading.
What documentation is typically required for importing goods under HS code 761691?
Standard import documentation for HS code 761691 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the origin and destination, a certificate of origin may be required, especially if preferential duty rates are claimed under a Free Trade Agreement. Importers should also be prepared for potential requests for technical specifications or product literature to verify classification. Specific import licenses or permits may be necessary depending on the nature of the article and the importing country's regulations.
Can you provide an example of how import duty is calculated for HS code 761691?
Certainly. Let's assume an importer is bringing aluminum fasteners (which fall under 761691) into the United States. The MFN duty rate is 6.00% ad valorem. If the invoice value of the imported fasteners is $10,000 USD, the duty calculation would be: $10,000 (value) × 0.06 (duty rate) = $600 USD. If the goods were eligible for a preferential rate, such as from a country with a Free Trade Agreement offering duty-free entry, the duty amount would be $0. It is essential to use the correct valuation method (often the CIF value – Cost, Insurance, and Freight) as per the importing country's customs regulations.