HS 761610 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
Quick Answer: Aluminum fasteners imported under HS 761610 enter the UK at 6.00%, the EU at 6.00%, and the US with a range of rates, including 4.7% and a high 45% for certain origins, while others are duty-free. This code covers a broad category of aluminum articles used for fastening, such as nails, tacks, staples, screws, bolts, nuts, rivets, washers, and similar items, excluding those specifically classified elsewhere. Importers should carefully verify the specific subheadings and origin-based duty rates within each jurisdiction, as significant variations exist. According to CustomTariffs data, understanding these nuances is crucial for accurate duty assessment and cost management.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616100000 | 6.00 % | — | — |
| 7616100010 | 6.00 % | — | — |
| 7616100099 | 6.00 % | — | — |
| 7616100091 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616100010 | 6.00 % | — | — |
| 7616100099 | 6.00 % | — | — |
| 7616100000 | 6.00 % | — | — |
| 7616100091 | 6.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7616109030 | — | — | ["kg"] |
| 761610 | — | — | — |
| 7616103000 | 4.7% | Free (18 programs) | ["kg"] |
| 7616105000 | 5.7% | Free (18 programs) | ["kg"] |
| 7616107030 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7616.10?
Imports of Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% for USMCA, KORUS, GSP, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 761610 cover?
This subheading covers a wide array of small, typically metal articles used for fastening or joining, manufactured from aluminum or its alloys. As per the World Customs Organization (WCO) Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this category includes items such as nails, tacks, staples (excluding those specifically classified under heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers, and similar articles, all primarily made of aluminum. The key characteristic is their function as fasteners or joining components.
What falls outside HS 761610?
The following products are excluded from HS 761610: fasteners made from materials other than aluminum or its alloys, such as steel, brass, or plastic, which would be classified under different headings based on their material composition. Additionally, staples of heading 8305, which are specifically for stapling machines, are excluded. Articles that, despite their shape, serve a primary function other than fastening, or are part of a larger assembly, are also not classified here. For example, decorative aluminum studs for clothing would likely fall under Chapter 61 or 62, not this heading.
What are common classification mistakes for HS 761610?
A common error is misclassifying aluminum fasteners based solely on their appearance without considering their primary function or material. For instance, small aluminum decorative pins might be mistakenly classified here when they are intended as embellishments for textiles and should be classified according to the textile product they adorn. Another mistake involves confusing aluminum fasteners with those made of other metals, failing to adhere to the material-specific nature of Chapter 76. Adherence to General Rule of Interpretation (GRI) 1, which states classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial.
How should importers classify products under HS 761610?
The correct procedure for classifying products under HS 761610 involves a thorough examination of the article's material composition, form, and intended use. Importers and customs brokers must verify that the fasteners are indeed made of aluminum or its alloys. Consulting the official nomenclature, including the WCO HS Explanatory Notes and specific national tariff schedules such as the USITC HTS or EU TARIC, is essential. If the product meets the description of nails, screws, bolts, nuts, rivets, or similar articles made of aluminum, and is not specifically excluded, then HS 761610 is the appropriate classification.
How is the duty calculated for products under HS 761610?
A shipment of 10,000 aluminum screws, each weighing approximately 5 grams (totaling 50 kg), declared at a customs value of $500 USD, would attract a US duty of $20.00. This is calculated using the Most Favored Nation (MFN) duty rate of 0.04% ad valorem, applied to the declared value: 0.0004 × $500 = $0.20. However, if the duty were based on weight, and assuming a hypothetical rate of $0.40 per kilogram, the duty would be $0.40/kg × 50 kg = $20.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 761610?
Several free trade agreements may reduce the applicable duty rate for HS 761610, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying aluminum fasteners originating from Canada or Mexico can be imported into the United States duty-free. To claim this preference, a valid USMCA Certificate of Origin is required. Additionally, the Generalized System of Preferences (GSP) may offer reduced or duty-free treatment for qualifying aluminum fasteners originating from certain developing countries, often requiring a GSP Form A. Specific documentation requirements vary by agreement and importing country.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 761610 (aluminum fasteners)?
The Most Favored Nation (MFN) duty rate for HS code 761610 is 6.00% ad valorem. However, preferential rates apply under various trade agreements. For example, under the US-Australia Free Trade Agreement (AU), the rate is Free. Under the US-Korea Free Trade Agreement (KR), the rate is also Free. It is crucial to consult the specific trade agreement applicable to your country of origin to determine the correct duty rate. Always verify the latest rates with official sources like the USITC Harmonized Tariff Schedule.
How is the import duty for HS 761610 calculated?
The duty for HS code 761610 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the imported goods. For instance, if you import aluminum screws valued at $10,000 and the MFN duty rate is 6.00%, the duty would be calculated as: $10,000 (value) * 0.06 (duty rate) = $600. If specific duties apply (e.g., per kilogram), the calculation would be rate per unit multiplied by the quantity imported. Always ensure your customs declaration accurately reflects the value and quantity of the goods.
What documentation is typically required for importing goods classified under HS 761610?
When importing goods under HS code 761610, standard import documentation is required. This includes a commercial invoice detailing the description, quantity, value, and country of origin of the aluminum fasteners. A packing list is also essential. Depending on the country of origin and any claimed preferential duty rates, a certificate of origin may be necessary. For goods originating from countries with specific trade agreements, proof of eligibility for preferential treatment is mandatory. Consult your customs broker for a comprehensive list based on your specific import scenario.
Are there any specific criteria to distinguish aluminum fasteners under HS 761610 from other HS codes?
HS code 761610 specifically covers aluminum 'nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles'. The key classification criteria are the material (aluminum) and the form/function of the article as a fastener or similar connecting device. Heading 8305 covers staplers and staples for use in office or for stationery purposes, which are excluded from 761610. If the article is made of a different base metal (e.g., steel), it would fall under a different HS code (e.g., 7317 for iron or steel nails, tacks, etc.). Always refer to the Explanatory Notes of the Harmonized System for detailed guidance on classification.
Which major trade agreements offer preferential duty rates for HS code 761610 imports into the United States?
Several trade agreements provide preferential duty rates for aluminum fasteners (HS 761610) imported into the United States. For instance, goods originating from Australia (AU), Bahrain (BH), Chile (CL), Israel (IL), Jordan (JO), Korea (KR), Morocco (MA), Oman (OM), Peru (PE), Singapore (SG), and the US-Central America-Dominican Republic Free Trade Agreement (CAFTA-DR, often represented by codes like D, E, P, S, etc. depending on the specific country) may benefit from reduced or free entry. It is imperative to obtain a valid Certificate of Origin from the exporter to claim these benefits. Always consult the USITC Harmonized Tariff Schedule for the most current and specific preferential rates and requirements.