HS 761010 Doors, windows and their frames and thresholds for doors
Quick Answer: Doors, windows, and their frames and thresholds for doors, classified under HS code 761010, enter the UK at 6.00%, the EU at 6.00%, and the US at 5.7% under the Most Favored Nation (MFN) rate, with certain trade agreements offering duty-free entry. This classification specifically covers finished articles of aluminum, such as ready-to-install doors and windows, along with their associated frames and thresholds. Importers should be aware of potential variations in duty rates based on the origin of goods and applicable preferential trade agreements. CustomTariffs aggregates this information to assist with compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7610100000 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7610100000 | 6.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7610100010 | — | — | ["kg"] |
| 7610100030 | — | — | ["kg"] |
| 76101000 | 5.7% | Free (17 programs) | — |
| 7610100020 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7610.10?
Imports of Doors, windows and their frames and thresholds for doors may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 761010 cover?
This subheading covers doors, windows, and their associated frames and thresholds, specifically when manufactured from aluminum. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category includes complete units ready for installation. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these items are primarily characterized by their aluminum construction and their function as building components for ingress, egress, and fenestration.
What falls outside HS 761010?
The following products are excluded from HS 761010: doors, windows, and their frames and thresholds made from materials other than aluminum, such as steel, wood, or plastic. Also excluded are components that are not integral to the door or window unit itself, like separate insect screens, decorative grilles not forming part of the frame, or specialized industrial shutters. For instance, a purely decorative aluminum grille would likely be classified under heading 7616, while a wooden window frame would fall under Chapter 44.
What are common classification mistakes for HS 761010?
A common error is misclassifying aluminum doors or windows that are not primarily for building use, such as those for vehicles or specialized equipment, which would fall under different headings. Another mistake involves classifying components separately when they are part of a complete door or window assembly. According to General Rule of Interpretation (GRI) 2(a), an incomplete or unfinished article is classified as if it were the complete article if it has the essential character of the finished product, which can lead to confusion if parts are imported separately.
How should importers classify products under HS 761010?
The correct procedure for classifying aluminum doors, windows, and their frames and thresholds involves first identifying the primary material (aluminum) and the product's function as a building component. Importers and customs brokers must consult the relevant national tariff schedule, such as the USITC HTS or the UK Trade Tariff, to confirm the specific wording and any additional notes. Verification of the product's construction and intended use is crucial to ensure accurate classification under HS 761010.
How is the duty calculated for products under HS 761010?
A set of two aluminum casement windows, each measuring 1.2m x 1.5m and declared at a customs value of $500 USD, would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.0% ad valorem, applied to the declared value ($500 USD × 0.07 = $35.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for subheading 7610.10.00.
Which trade agreements reduce duties for HS 761010?
Several free trade agreements may reduce the applicable duty rate for HS 761010, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The UK's Free Trade Agreement with the EU also allows for preferential rates, often Free, for eligible aluminum doors and windows. To claim these preferences, a self-certified origin statement for USMCA or an EUR.1 movement certificate for EU/UK trade is typically required, depending on the jurisdiction and specific agreement terms.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for aluminum doors, windows, and their frames and thresholds (HS 761010)?
The Most Favored Nation (MFN) duty rate for HS code 761010, covering aluminum doors, windows, and their frames and thresholds, is typically 6.00% ad valorem in the United States. However, preferential duty rates are available under various trade agreements. For example, goods originating from countries like Australia (AU), Canada (CA), Chile (CL), South Korea (KR), and Singapore (SG) may benefit from duty-free entry (Free). It is crucial to consult the specific trade agreement and verify the country of origin to determine the applicable rate. Always refer to the Harmonized Tariff Schedule of the United States (HTSUS) for the most current and precise duty information.
How is the import duty for HS 761010 calculated? Can you provide an example?
The import duty for HS 761010 is generally calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 6.00% and you import aluminum window frames valued at $10,000 USD, the duty would be calculated as follows: Duty = 6.00% × $10,000 USD = $600 USD. If specific duties (e.g., per unit) were applicable, the calculation would be based on the quantity. Always ensure your customs value is accurately declared and supported by proper documentation.
What are the key classification criteria for goods under HS code 761010?
HS code 761010 specifically covers finished or unfinished doors, windows, and their frames and thresholds, made of aluminum. The key criteria for classification are the material (aluminum) and the product's function as a component of a building's structure (door, window, frame, or threshold). Parts that are not readily identifiable as belonging to doors or windows, or are primarily structural components of a building rather than functional elements of an opening, may fall under different headings. For instance, large aluminum extrusions intended for general construction would not be classified here.
What documentation is typically required for importing aluminum doors and windows (HS 761010)?
When importing goods classified under HS 761010, standard import documentation is required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim preferential duty rates under trade agreements, a Certificate of Origin (COO) is often mandatory, demonstrating that the goods meet the rules of origin for that specific agreement. Importers should also be prepared for potential requests for product specifications or technical drawings to verify classification.
Which common trade agreements offer preferential duty rates for HS 761010 into the United States?
Several trade agreements provide preferential duty rates for goods classified under HS 761010 entering the United States. Notable examples include the United States-Mexico-Canada Agreement (USMCA), which can offer duty-free entry for qualifying goods; agreements with countries like Chile (CL), South Korea (KR), and Australia (AU) also often provide reduced or zero duty rates. The specific preferential rate depends on the country of origin and whether the goods meet the applicable rules of origin outlined in each agreement. Importers must obtain a valid Certificate of Origin for the relevant trade agreement to claim these benefits.