HS 760692 Of aluminium alloys
Quick Answer: Aluminium alloy plates, sheets, and strips imported under HS 760692 enter the UK at 6.00%, the EU at 7.50%, and the US at 3% (MFN). This code specifically covers flat-rolled products of aluminium alloys, excluding those clad with other base metals. Importers should be aware of potential anti-dumping duties or other trade remedies that may apply in certain jurisdictions, which can significantly impact the final landed cost. CustomTariffs aggregates this data, highlighting the varying tariff burdens across major trading blocs for this commodity.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606920023 | 6.00 % | — | — |
| 7606920025 | 6.00 % | — | — |
| 7606920030 | 6.00 % | — | — |
| 7606920091 | 6.00 % | — | — |
| 7606920092 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606920000 | 7.50 % | — | — |
| 7606920025 | 7.50 % | — | — |
| 7606920023 | 7.50 % | — | — |
| 7606920030 | 7.50 % | — | — |
| 7606920091 | 7.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 76069230 | 3% | Free (17 programs) | — |
| 7606923035 | — | — | ["kg"] |
| 76069260 | 6.5% | Free (17 programs) | — |
| 7606926095 | — | — | ["kg"] |
| 760692 | — | — | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7606.92?
Imports of Of aluminium alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 760692 cover?
This subheading covers flat-rolled products of aluminium alloys, not further worked than clad, plated or coated, of a thickness exceeding 0.2 mm. According to the World Customs Organization's Harmonized System Nomenclature, this category specifically includes sheets, strip, and plates made from aluminium alloys, which are defined as mixtures of aluminium with other metallic elements to improve its properties. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these products must be of a thickness greater than 0.2 millimeters to fall under this classification, excluding thinner foils.
What falls outside HS 760692?
The following products are excluded from HS 760692: aluminium alloys in forms other than flat-rolled products (such as bars, rods, or wire), products of pure aluminium (not alloyed), and flat-rolled products with a thickness of 0.2 mm or less, which are classified under heading 7607. Additionally, aluminium alloys that have undergone further working beyond cladding, plating, or coating, such as being cut to shape, perforated, or embossed, would be classified elsewhere, typically in headings 7606.10 or 7606.91 depending on their specific form.
What are common classification mistakes for HS 760692?
A common error is misinterpreting the "alloy" requirement. Importers may incorrectly classify products of pure aluminium under this subheading, or conversely, classify aluminium alloys that are not in flat-rolled form. Another frequent mistake involves confusion with other forms of aluminium products, such as tubes or pipes (Chapter 76, heading 7608) or bars and rods (Chapter 76, heading 7609). Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial.
How should importers classify products under HS 760692?
The correct procedure for classifying products under HS 760692 involves a systematic approach. Firstly, determine if the product is made of an aluminium alloy, meaning it contains aluminium mixed with other metals. Secondly, confirm that the product is in a flat-rolled form, such as a sheet, strip, or plate. Thirdly, verify that its thickness exceeds 0.2 mm. Finally, consult the relevant national tariff schedule, such as the USITC HTS or the EU TARIC, to confirm the specific subheading and any additional notes or requirements for this classification.
How is the duty calculated for products under HS 760692?
A shipment of 1,000 kilograms of aluminium alloy sheets (HS 760692) declared at a customs value of $5,000 USD would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value: 5.0% × $5,000 USD = $250.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule of the United States (HTSUS).
Which trade agreements reduce duties for HS 760692?
Several free trade agreements may reduce the applicable duty rate for HS 760692, including the United States-Mexico-Canada Agreement (USMCA) and the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP). Under USMCA, originating products from Mexico and Canada can achieve a duty rate of Free. For CPTPP, originating products from countries like Japan and Singapore may also benefit from preferential rates, potentially Free. To claim these preferences, a self-certified origin statement is typically required for USMCA, while a specific origin certificate may be needed for CPTPP, depending on the exporting country and importing jurisdiction's specific requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 760692, specifically for 'plates, sheets and strip, of aluminium alloys'?
The Most Favored Nation (MFN) duty rate for HS code 760692 can vary. For example, the U.S. International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) lists a rate of 6.00% ad valorem for many origins. However, preferential rates are available under various trade agreements. For instance, imports from countries like Australia (AU), Chile (CL), South Korea (KR), and Singapore (SG) may benefit from a Free duty rate. It is crucial to consult the latest HTS for the specific origin of the goods to determine the applicable duty. The UK Trade Tariff also shows varying rates, often around 3% or 7.50% ad valorem depending on the origin and specific product details.
How is the duty for HS code 760692 calculated, and can you provide an example?
The duty for HS code 760692 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For example, if the MFN duty rate is 6.00% and you import 1,000 kg of aluminium alloy plates valued at $5,000 USD, the duty calculation would be: $5,000 USD (value) × 6.00% (duty rate) = $300 USD. If there were also specific duties (e.g., per kg), those would be calculated separately and potentially combined with the ad valorem duty, depending on the tariff's structure.
What are the key classification criteria for goods falling under HS code 760692?
HS code 760692 specifically covers 'plates, sheets and strip, of aluminium alloys'. The primary classification criteria are: 1. Material Composition: The goods must be made of aluminium alloys, meaning they contain significant amounts of aluminium along with other elements like copper, magnesium, silicon, or zinc to enhance properties. Pure aluminium would fall under a different heading. 2. Form: The goods must be in the form of plates, sheets, or strip. These are generally flat-rolled products. 'Plates' typically refer to thicker products, 'sheets' to thinner ones, and 'strip' to narrower, often coiled, forms. The specific dimensions can sometimes influence classification within subheadings, but the fundamental form is key. Referencing the Explanatory Notes to the Harmonized System is essential for precise definitions.
Which common trade agreements offer preferential duty rates for HS code 760692?
Several trade agreements provide preferential duty rates for goods classified under HS code 760692. For example, the United States has agreements like the US-Korea Free Trade Agreement (KORUS FTA) and agreements with countries such as Australia, Chile, and Singapore, which can result in duty-free entry for qualifying aluminium alloy products. The European Union's TARIC system details preferential rates under agreements with numerous countries and blocs. Similarly, the UK Trade Tariff outlines preferential rates stemming from the UK's independent trade agreements. Importers must verify the specific origin of their goods and ensure they meet the rules of origin requirements stipulated in the relevant trade agreement to claim preferential treatment.
What documentation is typically required for importing goods under HS code 760692, especially when claiming preferential duty rates?
Standard import documentation for HS code 760692 includes a commercial invoice, packing list, and bill of lading or air waybill. To claim preferential duty rates under a trade agreement, additional documentation is usually required. This often involves a Certificate of Origin (COO) or a declaration of origin on the commercial invoice, issued by the exporter and validated according to the specific requirements of the trade agreement (e.g., specific format, exporter registration number). For goods classified as aluminium alloys, documentation proving the alloy composition might also be requested by customs authorities to verify compliance with the HS code definition and any origin rules. Always consult the customs regulations of the importing country and the specific trade agreement for precise documentation requirements.