HS 760691 Other
Quick Answer: Aluminum plates, sheets, and strip, not otherwise specified under HS 7606, enter the UK at 6.00%, the EU at 7.50%, and the US at 2.7% or Free for certain preferential trade partners. This residual classification applies to aluminum products in this form that do not meet the specific criteria of other subheadings within heading 7606, such as those clad with other materials or those of a specific thickness. Importers should carefully review the specific dimensions and composition of their aluminum products to ensure correct classification, as misclassification can lead to incorrect duty assessments. CustomTariffs aggregates this data to assist trade professionals.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606910000 | 6.00 % | — | — |
| 7606910030 | 6.00 % | — | — |
| 7606910086 | 6.00 % | — | — |
| 7606910088 | 6.00 % | — | — |
| 7606910025 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606910025 | 7.50 % | — | — |
| 7606910086 | 7.50 % | — | — |
| 7606910000 | 7.50 % | — | — |
| 7606910030 | 7.50 % | — | — |
| 7606910088 | 7.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 760691 | — | — | — |
| 7606913055 | — | — | ["kg"] |
| 76069160 | 2.7% | Free (17 programs) | — |
| 7606916095 | — | — | ["kg"] |
| 76069130 | 3% | Free (17 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7606.91?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 760691 cover?
This subheading covers "other" aluminum plates, sheets, and strip, not elsewhere specified within heading 7606. According to the World Customs Organization's Harmonized System Nomenclature, this category is for products that do not meet the specific criteria for clad, forged, perforated, or corrugated forms detailed in preceding subheadings. For instance, plain, unworked aluminum sheets of a specific thickness or alloy composition, not fitting other descriptions, would fall here. The USITC Harmonized Tariff Schedule and the EU TARIC database provide further detail on specific dimensions and alloy compositions that define this residual category.
What falls outside HS 760691?
The following products are excluded from HS 760691: aluminum plates, sheets, and strip that are clad, forged, perforated, or corrugated. Also excluded are products that are worked beyond simple cutting to shape, such as those with significant surface treatments like anodizing or painting, unless these are incidental to the basic form. For example, aluminum foil (typically under 0.2 mm thickness) is classified under HS 7607, and aluminum bars, rods, and profiles are classified under HS 7608 or 7609.
What are common classification mistakes for HS 760691?
A common error is misclassifying aluminum products with minor surface treatments or those that are partially worked as "other." According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. For example, if an aluminum sheet has undergone a significant surface treatment that alters its essential character, it may need to be classified in a more specific heading related to finished goods or surface-treated articles, rather than remaining in the "other" category of 760691.
How should importers classify products under HS 760691?
The correct procedure for classifying products under HS 760691 involves a thorough examination of the product's physical characteristics and any accompanying documentation. Importers and customs brokers must first consult the WCO HS Explanatory Notes and the specific tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff. They should verify that the product is indeed an aluminum plate, sheet, or strip and that it does not meet the criteria for any more specific subheading within heading 7606 or other headings.
How is the duty calculated for products under HS 760691?
A shipment of 1,000 kilograms of plain aluminum sheets (HS 760691) declared at a customs value of $5,000 USD would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value: 5.0% × $5,000 USD = $250.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule, which specifies the ad valorem duty for this classification.
Which trade agreements reduce duties for HS 760691?
Several free trade agreements may reduce the applicable duty rate for HS 760691, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating aluminum products from Canada and Mexico can enter the United States duty-free. To claim this preference, a valid origin declaration is required. For goods originating in countries benefiting from the Generalized System of Preferences (GSP), a GSP Form A may be necessary, potentially reducing the duty to 0% or a lower preferential rate depending on the specific country and product.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the primary import duty rates for HS code 760691, and how do preferential rates apply?
HS code 760691 covers 'Other' aluminum plates, sheets, and strip (whether or not alloyed) not further worked than clad, polished or coated, of a thickness exceeding 0.2 mm. The Most Favored Nation (MFN) duty rate in the United States is 6.00% ad valorem. However, preferential rates are available under various Free Trade Agreements (FTAs). For example, goods originating from Australia (AU), Chile (CL), Singapore (SG), and others may receive duty-free entry under specific FTAs. Importers must ensure they have the necessary proof of origin to claim these preferential rates. Always consult the latest Harmonized Tariff Schedule of the United States (HTSUS) for the most current rates and applicable preferential treatment.
What specific criteria distinguish goods classified under HS 760691 from other aluminum products in Chapter 76?
HS code 760691 is a residual category for aluminum plates, sheets, and strip that do not meet the specific criteria of other subheadings within HS 7606. The key defining characteristics are that the product must be in the form of a plate, sheet, or strip, made of aluminum (whether or not alloyed), and have a thickness exceeding 0.2 mm. Furthermore, it must not have undergone any further working beyond cladding, polishing, or coating. If the aluminum product is in a different form (e.g., foil, wire, bars, profiles) or has undergone significant further working (e.g., shaping into specific components), it would likely be classified under a different HS code. Always refer to the Chapter 76 notes and the Explanatory Notes of the Harmonized System for precise classification guidance.
What documentation is typically required for importing goods under HS code 760691 into the United States?
For importing goods classified under HS code 760691 into the United States, standard documentation includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to benefit from preferential duty rates under FTAs, a valid Certificate of Origin (or equivalent declaration as specified by the respective FTA) is mandatory. Importers may also need to provide technical specifications or product data sheets to verify compliance with the HS 7606 definition. U.S. Customs and Border Protection (CBP) may request additional documentation to verify classification, value, and eligibility for preferential treatment.
How is the import duty for HS 760691 calculated, using a concrete numerical example?
The import duty for HS code 760691 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 6.00% and you import aluminum sheets valued at $10,000 USD, the duty calculation would be: $10,000 (Value) × 0.06 (Duty Rate) = $600 USD. In some cases, duties might also be assessed based on weight (e.g., per kilogram). If, for instance, there was a specific rate of $0.05 per kg and you imported 500 kg of aluminum sheets, the duty would be: 500 kg × $0.05/kg = $25 USD. It is essential to check the specific duty assessment basis (ad valorem, specific, or compound) listed in the HTSUS for the exact calculation.
Which major trade agreements offer preferential duty rates for HS code 760691, and what are the implications for importers?
Several trade agreements can impact the duty rates for HS code 760691. For imports into the US, agreements like the United States-Mexico-Canada Agreement (USMCA) and bilateral FTAs with countries such as Chile (CL), Singapore (SG), and South Korea (KR) may offer reduced or duty-free entry, provided the goods meet the rules of origin stipulated in each agreement. For instance, goods originating from Australia (AU) may also benefit from preferential treatment. Importers must carefully review the specific requirements of each agreement, including origin criteria and documentation, to claim these benefits. Failure to meet these requirements can result in the assessment of the standard MFN duty rate. Consulting the latest HTSUS and the text of the relevant trade agreements is crucial for compliance.