HS 760612 Of aluminium alloys
Quick Answer: Aluminium plates, sheets, and strip of a thickness exceeding 0.2 mm, of aluminium alloys, imported under HS 760612, enter the UK at 6.00%, the EU at 7.50%, and the US with rates varying from Free to 13.5% depending on origin. This classification specifically covers flat-rolled products made from aluminium alloys, excluding those with a thickness of 0.2 mm or less. Importers should be aware of preferential trade agreements that may offer reduced or zero duty rates in the US. CustomTariffs aggregates this data, highlighting the importance of verifying specific origin-based rates for accurate customs declarations.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606120000 | — | — | — |
| 7606121100 | 6.00 % | — | — |
| 7606121900 | 6.00 % | — | — |
| 7606123000 | 6.00 % | — | — |
| 7606125000 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7606120000 | 7.50 % | — | — |
| 7606121900 | 7.50 % | — | — |
| 7606125000 | 7.50 % | — | — |
| 7606125025 | 7.50 % | — | — |
| 7606125085 | 7.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 76061230 | 3% | Free (17 programs) | — |
| 7606123025 | — | — | ["kg"] |
| 7606123045 | — | — | ["kg"] |
| 7606123096 | — | — | ["kg"] |
| 760612 | — | — | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7606.12?
Imports of Of aluminium alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 760612 cover?
This subheading covers flat-rolled products of aluminium alloys, specifically those in coils or rectangular (including square) shapes, with a thickness exceeding 0.2 mm. According to the World Customs Organization's Harmonized System Nomenclature, this category encompasses sheets, plates, and strips made from aluminium alloys, which are defined as mixtures where aluminium is the predominant metal by weight. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these products are characterized by their alloy composition, distinguishing them from pure aluminium flat-rolled products.
What falls outside HS 760612?
The following products are excluded from HS 760612: flat-rolled products of pure aluminium, those with a thickness of 0.2 mm or less (which fall under HS 760611), and aluminium foil (typically classified under HS 7607). Additionally, products that have undergone significant further working, such as perforated sheets or embossed plates, may be classified elsewhere depending on the nature of the processing. For instance, aluminium extrusions or castings, even if in a flat shape, are not covered by this heading.
What are common classification mistakes for HS 760612?
A common error is misinterpreting the "aluminium alloys" requirement. Importers may mistakenly classify products made from pure aluminium under this subheading, or conversely, classify aluminium alloy products that have been significantly further worked. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. Failing to verify the alloy composition or overlooking subsequent processing steps are frequent pitfalls, leading to incorrect duty assessments.
How should importers classify products under HS 760612?
The correct procedure for classifying products under HS 760612 involves a multi-step verification process. First, confirm that the product is a flat-rolled item (sheet, plate, or strip) and that its thickness exceeds 0.2 mm. Second, verify that the material is indeed an aluminium alloy, meaning aluminium is the predominant metal by weight. Consulting the product's technical specifications or mill certificates is crucial. Finally, check the relevant national tariff schedule, such as the USITC HTS or the UK Trade Tariff, for specific subheadings and any additional notes.
How is the duty calculated for products under HS 760612?
A 1000 kg shipment of aluminium alloy sheets (e.g., 6061 alloy) for construction, declared at a customs value of $3,500 USD, would attract a US duty of $175.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem published in the USITC Harmonized Tariff Schedule (HTS) for HS code 7606.12.0000 (5.0% × $3,500 USD = $175.00). Note that specific subheadings might exist for different forms or finishes, requiring precise classification.
Which trade agreements reduce duties for HS 760612?
Several free trade agreements may reduce the applicable duty rate for HS 760612, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating aluminium alloy flat-rolled products from Canada or Mexico can enter the US duty-free. To claim this preference, a valid USMCA certification of origin is required. Similarly, the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may offer preferential rates for originating goods from member countries like Japan or Australia, often requiring a certificate of origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 760612 (plates, sheets, strip, foil, powder, and flakes, of aluminium alloys)?
The Most Favored Nation (MFN) duty rate for HS code 760612 can vary significantly by country. For example, the U.S. Harmonized Tariff Schedule (USHTS) lists a rate of 5.5% ad valorem. The EU's TARIC system may show different rates depending on the specific alloy and origin. The UK Trade Tariff also provides specific rates. It is crucial to consult the official tariff schedule of the importing country for the exact rate applicable to your specific import.
How is the import duty for HS 760612 calculated, and can you provide an example?
Import duty is typically calculated as a percentage of the declared customs value (ad valorem) or based on a specific unit (specific duty). For HS 760612, it's commonly an ad valorem duty. For instance, if the declared customs value of an import shipment of aluminium alloy sheets is $10,000 USD and the applicable MFN duty rate is 5.5%, the import duty would be calculated as: $10,000 (Value) × 0.055 (Duty Rate) = $550 USD. Always verify the basis of duty calculation (ad valorem, specific, or compound) with the importing country's customs authority.
What are the key classification criteria for goods falling under HS code 760612?
HS code 760612 specifically covers articles of aluminium alloys in the form of plates, sheets, strip, foil, powder, and flakes. The primary criterion is that the material must be an alloy of aluminium, meaning it contains aluminium as its principal element but also includes one or more other elements to enhance its properties. Pure aluminium (99% or more aluminium) would generally fall under HS code 760611. Importers must ensure the product's composition and form match the description of this heading.
Which trade agreements often provide preferential duty rates for HS code 760612, and what documentation is needed?
Many trade agreements can offer reduced or zero duty rates for goods classified under HS 760612. Examples include agreements like the USMCA (United States-Mexico-Canada Agreement), CAFTA-DR (Dominican Republic-Central America Free Trade Agreement), and various Free Trade Agreements (FTAs) the EU or UK have with partner countries. To claim preferential treatment, importers typically need a Certificate of Origin (COO) or a declaration of origin provided by the exporter, demonstrating that the goods meet the rules of origin stipulated in the relevant trade agreement. Always check the specific requirements of the applicable trade agreement.
Are there any specific documentation requirements beyond the commercial invoice and bill of lading for importing goods under HS 760612?
While a commercial invoice, bill of lading, and packing list are standard, importing aluminium alloy products under HS 760612 may require additional documentation depending on the importing country's regulations and the specific nature of the alloy. This could include a Certificate of Analysis (CoA) detailing the alloy composition, especially if specific alloy designations are relevant for duty or regulatory purposes. Some countries may also require declarations regarding the origin of the materials or compliance with specific safety or environmental standards. Consulting the importing country's customs authority or a licensed customs broker is advisable.