HS 760519 Other
Quick Answer: Aluminum wire imported under HS 760519 enters the UK duty-free, the EU at 7.50% ad valorem, and the US at 4.2% ad valorem (MFN). This residual classification applies to aluminum wire not specifically covered by other headings within HS 7605, such as wire of aluminum alloys or wire with a cross-sectional dimension exceeding 6 mm. Importers should verify specific alloy compositions and dimensions against the detailed tariff schedules of the destination country. According to CustomTariffs, understanding these nuances is crucial for accurate declaration and duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7605190010 | 0.00 % | — | — |
| 7605190090 | 0.00 % | — | — |
| 7605190000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7605190010 | 7.50 % | — | — |
| 7605190000 | 7.50 % | — | — |
| 7605190090 | 7.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7605190000 | 4.2% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7605.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 760519 cover?
This subheading covers "Other" aluminum wire, not elsewhere specified within Heading 7605. According to the World Customs Organization (WCO) Harmonized System Nomenclature, Heading 7605 specifically pertains to aluminum wire. Subheading 760519 is a residual category for aluminum wire that does not fit into the more specific subheadings, such as those for wire of aluminum alloys or wire of aluminum with a cross-sectional dimension exceeding 6 mm. The USITC Harmonized Tariff Schedule (HTS) and EU TARIC database confirm this residual nature, encompassing various forms of aluminum wire not otherwise detailed.
What falls outside HS 760519?
The following products are excluded from HS 760519: aluminum wire of aluminum alloys (classified under 760511), aluminum wire with a maximum cross-sectional dimension exceeding 6 mm (classified under 760511), and aluminum wire with a maximum cross-sectional dimension not exceeding 6 mm but made from aluminum alloys (classified under 760511). Additionally, products that are not wire, such as aluminum bars, rods, or profiles, are classified under different headings within Chapter 76. For instance, aluminum bars and rods are typically found in Heading 7604.
What are common classification mistakes for HS 760519?
A common error is misclassifying aluminum wire that is actually an alloy or has a cross-sectional dimension exceeding 6 mm. General Rule of Interpretation (GRI) 1 states that classification shall be determined according to the terms of the headings and any relative section or chapter notes. If the wire is made from an aluminum alloy, it should be classified under 760511, not 760519. Similarly, if the wire's largest cross-sectional dimension is greater than 6 mm, it also falls under 760511, regardless of whether it's pure aluminum or an alloy.
How should importers classify products under HS 760519?
The correct procedure for classifying products under HS 760519 involves a detailed examination of the product's material composition and physical dimensions. Importers and customs brokers must first determine if the wire is made of pure aluminum or an aluminum alloy. Subsequently, they must measure the largest cross-sectional dimension of the wire. If the wire is of pure aluminum and its largest cross-sectional dimension does not exceed 6 mm, and it is not specifically covered by other subheadings within 7605, then HS 760519 is the appropriate classification.
How is the duty calculated for products under HS 760519?
A shipment of 1,000 kilograms of pure aluminum wire, with a cross-sectional dimension not exceeding 6 mm, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the U.S. Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the declared customs value ($5,000 USD × 0.03 = $150.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 760519.0000.
Which trade agreements reduce duties for HS 760519?
Several free trade agreements may reduce the applicable duty rate for HS 760519. For instance, under the United States-Mexico-Canada Agreement (USMCA), originating aluminum wire may enter the United States duty-free. Similarly, the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) can offer preferential rates for originating goods from member countries like Vietnam. To claim these preferences, a valid USMCA certification of origin or a CPTPP certificate of origin is typically required, depending on the origin country and the specific agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 760519, 'Other' aluminum wire?
The Most Favored Nation (MFN) duty rate for HS code 760519 is 7.50% ad valorem. However, preferential duty rates are available under various trade agreements. For example, under the US Free Trade Agreement with Australia (AU), the duty rate is Free. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment based on the origin of the goods and the relevant trade agreement.
How is the duty calculated for HS code 760519?
The duty for HS code 760519 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the imported goods. For instance, if a shipment of aluminum wire classified under 760519 has a customs value of $10,000 and the MFN duty rate is 7.50%, the calculated duty would be $10,000 \times 0.075 = $750. Always ensure the customs value is determined according to the importing country's valuation rules.
What are the classification criteria for aluminum wire to fall under HS code 760519?
HS code 760519 is a residual category for aluminum wire not specifically covered by other subheadings within 7605. This typically includes aluminum wire that is not alloyed, or if alloyed, does not meet the specific criteria of other alloyed wire headings. Key classification factors include the cross-sectional shape (circular, non-circular), the maximum cross-sectional dimension (e.g., exceeding 7mm for some categories), and whether it is insulated or not. If the wire does not fit into more specific classifications like 760511 (for circular wire with a cross-sectional dimension exceeding 7mm), it will likely be classified under 760519.
Which trade agreements offer preferential duty rates for HS code 760519?
Several trade agreements can provide preferential duty rates for goods classified under HS code 760519. For example, the USMCA (United States-Mexico-Canada Agreement) may offer reduced or zero duties for goods originating from Canada or Mexico. Similarly, agreements with countries like South Korea (KR) often list a 0.00% duty rate. Importers must possess a valid Certificate of Origin or other proof of preferential origin to claim these benefits. Always verify the specific tariff schedule and the terms of the relevant trade agreement.
What documentation is typically required for importing goods under HS code 760519?
Standard import documentation for HS code 760519 includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, a Certificate of Origin may be required to claim preferential duty rates. If the wire is intended for specific industrial uses, additional certifications or compliance documents might be necessary. It is advisable to consult the customs authority of the importing country for a comprehensive list of required documents.