HS 760429 Other
Quick Answer: Aluminum bars, rods, and profiles imported under HS 760429 enter the UK at 6.00%, the EU at 7.50%, and the US at rates varying from Free to 45% ad valorem. This "Other" category within HS 7604 covers aluminum bars, rods, and profiles that do not meet the specific definitions of hollow profiles or those with further working. Importers should consult specific tariff schedules for precise rates, as preferential agreements significantly impact US duties. CustomTariffs aggregates this data, highlighting the need for careful classification and duty rate verification for international trade.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7604299010 | 6.00 % | — | — |
| 7604290000 | — | — | — |
| 7604291000 | 6.00 % | — | — |
| 7604299000 | 6.00 % | — | — |
| 7604299020 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7604290000 | 7.50 % | — | — |
| 7604299000 | 7.50 % | — | — |
| 7604299020 | 7.50 % | — | — |
| 7604291000 | 7.50 % | — | — |
| 7604299010 | 7.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 76042910 | 5% | Free (17 programs) | — |
| 7604291010 | — | — | ["kg"] |
| 7604291090 | — | — | ["kg"] |
| 760429 | — | — | — |
| 7604293090 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7604.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 760429 cover?
This subheading covers other bars, rods, and profiles of aluminum alloys, not further worked than extruded, that do not fall under more specific subheadings within heading 7604. According to the World Customs Organization's Harmonized System Nomenclature, this category encompasses a wide array of extruded aluminum shapes beyond those specifically detailed, provided they are made of aluminum alloys and have undergone only extrusion. For instance, the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that this "other" category captures profiles with complex cross-sectional geometries or those not meeting the criteria for bars or rods, as long as they are of aluminum alloys.
What falls outside HS 760429?
The following products are excluded from HS 760429: aluminum bars, rods, and profiles that have undergone further working beyond extrusion, such as machining, polishing, or coating, unless such operations are incidental to extrusion. Also excluded are solid aluminum bars and rods of heading 7604.10, and aluminum alloy bars, rods, and profiles that are specifically enumerated in other subheadings of 7604, such as those with a particular cross-sectional shape or those intended for specific uses. For example, hollow profiles or those with simple cross-sections might be classified elsewhere if they meet specific criteria.
What are common classification mistakes for HS 760429?
A common error is misinterpreting the "other" designation, leading to the incorrect classification of products that should fall under more specific subheadings within heading 7604 or even other headings entirely. For example, solid aluminum rods are classified under 7604.10, not 7604.29. Furthermore, confusion can arise regarding the extent of "further working." If an aluminum profile has undergone significant machining or assembly, it may no longer qualify for this subheading and could be classified as a finished article under a different heading, following General Rule of Interpretation (GRI) 1 and GRI 3.
How should importers classify products under HS 760429?
The correct procedure for classifying products under HS 760429 involves a thorough examination of the product's material composition, form, and any processing it has undergone. Importers and customs brokers must first confirm that the product is an extruded bar, rod, or profile made of aluminum alloy. Then, they must ascertain that it does not fit into any more specific subheading within heading 7604. Consulting the official tariff schedule, such as the USITC HTS or the EU TARIC, and reviewing explanatory notes from the WCO are crucial steps to ensure accurate classification.
How is the duty calculated for products under HS 760429?
A shipment of 1,000 kilograms of aluminum alloy extruded profiles, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the customs value ($5,000 USD × 0.03 = $150.00). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for HS code 7604.29.0000.
Which trade agreements reduce duties for HS 760429?
Several free trade agreements may reduce the applicable duty rate for HS 760429, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The UK's Free Trade Agreement with the EU can also lead to a Free duty rate for goods originating from the EU. To claim these preferential rates, importers typically require a self-certified origin statement for USMCA or an EUR.1 movement certificate for EU/UK preferences, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 760429 in the US, EU, and UK?
For HS code 760429, which covers 'Other' bars, rods, and profiles of aluminium alloys, the import duty rates vary by jurisdiction. In the United States, the Most Favored Nation (MFN) duty rate is typically 6.00% ad valorem. In the European Union, under the TARIC system, the rate can be 7.50% ad valorem. The United Kingdom's Trade Tariff also lists a general rate of 7.50% ad valorem for this code. It is crucial to consult the latest official tariff schedules for each country, as rates can be subject to change and specific trade agreements may apply.
How is the import duty for HS 760429 calculated, and can you provide an example?
The import duty for HS code 760429 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if a shipment of aluminium alloy profiles valued at $10,000 is imported into the US with an MFN duty rate of 6.00%, the import duty would be calculated as: $10,000 (Value) × 0.06 (Duty Rate) = $600. Always ensure the customs value is determined according to the valuation rules of the importing country.
What are the key classification criteria for goods falling under HS code 760429?
HS code 760429 applies to bars, rods, and profiles of aluminium alloys that do not meet the specific descriptions of other subheadings within HS 7604. The primary criteria include the material composition (aluminium alloys), the form (bars, rods, or profiles), and the manufacturing process (e.g., extruded, drawn, or rolled). If the product is not a simple bar or rod and has a complex cross-sectional shape, or if it is made from an alloy rather than pure aluminium and doesn't fit more specific categories, it will likely be classified under 760429. Refer to the Explanatory Notes of the Harmonized System for detailed guidance.
Which trade agreements offer preferential duty rates for HS code 760429, and what documentation is needed?
Several trade agreements can offer preferential duty rates for HS code 760429. For instance, the US has agreements like the USMCA (United States-Mexico-Canada Agreement) and others that might reduce or eliminate duties for qualifying goods from partner countries. The EU has numerous Free Trade Agreements (FTAs) with countries worldwide, and the UK has its own set of FTAs post-Brexit. To claim preferential treatment, importers typically need a Certificate of Origin or a declaration of origin from the exporter, demonstrating that the goods meet the rules of origin stipulated in the relevant trade agreement. Always verify the specific requirements of the agreement and the importing country's customs authority.
Are there any specific documentation requirements beyond a commercial invoice and bill of lading for HS 760429?
While a commercial invoice, bill of lading, and packing list are standard, for HS code 760429, additional documentation might be required depending on the importing country and the specific nature of the aluminium alloy product. This could include a Certificate of Analysis (CoA) detailing the alloy composition to confirm it meets the definition of an 'alloy' versus pure aluminium, especially if preferential rates are claimed based on origin or specific alloy types. If the goods are subject to specific safety or quality standards, compliance certificates may also be necessary. Customs brokers should always verify the import requirements with the destination country's customs agency.