HS 750720 Tube or pipe fittings
Quick Answer: Nickel tubes and pipes, and tubing and piping of nickel, imported under HS 750720 enter the UK duty-free, the EU at 2.50% ad valorem, and the US at 3% ad valorem under the Most Favored Nation (MFN) rate, with preferential rates available for certain trading partners. This classification specifically covers fittings for nickel tubes and pipes, such as elbows, couplings, and flanges, used to join or adapt these conduits. Importers should be aware of potential anti-dumping duties or other trade remedies that may apply in specific jurisdictions, which CustomTariffs aggregates. Accurate classification is crucial for correct duty assessment and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7507200000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7507200000 | 2.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7507200000 | 3% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7507.20?
Imports of Tube or pipe fittings may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 750720 cover?
This subheading covers fittings for tubes and pipes made of nickel, as defined by the World Customs Organization's Harmonized System (WCO HS) nomenclature. This includes items such as couplings, elbows, tees, and flanges specifically designed to join or connect nickel tubes or pipes. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these fittings must be manufactured from nickel or its alloys and serve a functional purpose in fluid or gas conveyance systems.
What falls outside HS 750720?
The following products are excluded from HS 750720: unworked nickel (Chapter 75), nickel bars, rods, and profiles (7505), nickel wire (7505), nickel plates, sheets, and strip (7506), and nickel powders and flakes (7504). Additionally, complete nickel tubes and pipes themselves, even if intended for fitting, are classified under HS 750711 or 750712. Articles of nickel that are not specifically fittings for tubes or pipes, such as fasteners or structural components, would also be classified elsewhere.
What are common classification mistakes for HS 750720?
A common error is misclassifying nickel-plated steel fittings under this subheading. According to General Rule of Interpretation (GRI) 3(b), goods are classified according to the essential character of the product. If the nickel plating is superficial and the steel provides the essential character, the fitting would be classified under steel fittings. Conversely, fittings made predominantly of nickel alloys but with minor plating of other metals would likely remain within this heading if nickel is the defining material.
How should importers classify products under HS 750720?
The correct procedure for classifying products under HS 750720 involves a detailed examination of the material composition and intended use. Importers and customs brokers must verify that the fitting is made of nickel or its alloys, not merely plated. Consulting the official HS Explanatory Notes and national tariff schedules, such as the UK Trade Tariff, is crucial. If the fitting is designed to connect nickel tubes or pipes, and nickel is the primary constituent, then HS 750720 is the appropriate classification.
How is the duty calculated for products under HS 750720?
A shipment of 100 nickel elbows, each weighing 0.5 kg, with a total declared customs value of $5,000 USD, would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value ($5,000 USD × 5.0% = $250.00). This calculation is based on the duty rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 7507.20.0000.
Which trade agreements reduce duties for HS 750720?
Several free trade agreements may reduce the applicable duty rate for HS 750720, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating nickel tube or pipe fittings from Canada or Mexico can be imported duty-free. To claim this preference, a self-certified origin statement is generally required. Additionally, preferential rates may be available for goods originating from countries with specific trade agreements with the importing nation, often requiring a certificate of origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 750720 (Tube or pipe fittings of nickel)?
The Most Favored Nation (MFN) duty rate for HS code 750720 is 2.50% ad valorem. However, preferential duty rates are available under various trade agreements. For example, imports from Australia (AU), Canada (CA), Chile (CL), South Korea (KR), Mexico (MX), and Singapore (SG) may be eligible for duty-free entry (0.00%). It is crucial to verify the specific origin of the goods and the applicable trade agreement to determine the correct preferential rate. Always consult the latest tariff schedule of the importing country for definitive rates.
How is the duty for HS code 750720 calculated, and can you provide an example?
The duty for HS code 750720 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For instance, if nickel pipe fittings valued at $10,000 are imported and the MFN duty rate is 2.50%, the import duty would be calculated as $10,000 (value) × 0.0250 (duty rate) = $250. If there are also specific duties (e.g., per kilogram), these would be applied in addition or as an alternative, depending on the tariff structure.
What are the classification criteria for goods falling under HS code 750720?
HS code 750720 covers tube or pipe fittings of nickel. This includes items such as elbows, couplings, flanges, tees, and reducers specifically designed for use with nickel tubes or pipes. The key classification criterion is that the fittings must be predominantly made of nickel or alloys thereof. Items that are merely plated with nickel or are part of a larger assembly not solely consisting of fittings may be classified elsewhere.
Which common trade agreements offer preferential duty rates for HS code 750720?
Several trade agreements provide preferential duty rates for goods classified under HS code 750720. For example, the United States has agreements with countries like Chile (CL), South Korea (KR), and Singapore (SG) that may offer reduced or zero duties. The European Union's TARIC system details rates for agreements with countries such as Switzerland (CH) and Norway (NO). Importers should consult the specific trade agreement schedules for the destination country to identify eligible preferential rates, which often require a Certificate of Origin.
What documentation is typically required for importing nickel tube or pipe fittings under HS code 750720?
Standard import documentation for HS code 750720 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the country of origin and destination, a Certificate of Origin may be required to claim preferential duty rates under trade agreements. For specific applications or if required by the importing country's customs authority, technical specifications or material certifications confirming the nickel content might also be necessary.