HS 750620 Of nickel alloys
Quick Answer: Nickel alloys imported under HS 750620 enter the UK duty-free, the EU at 3.30% ad valorem, and the US at 3% ad valorem (MFN). This code specifically covers articles of nickel alloys, such as plates, sheets, and strips. Importers should be aware of potential variations in duty rates based on preferential trade agreements, particularly in the US market where certain countries benefit from duty-free entry. Exporters should consult detailed tariff schedules, such as those available through CustomTariffs, to ensure accurate classification and compliance for each destination market.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506200000 | 0.00 % | — | — |
| 7506200010 | 0.00 % | — | — |
| 7506200020 | 0.00 % | — | — |
| 7506200090 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506200000 | 3.30 % | — | — |
| 7506200020 | 3.30 % | — | — |
| 7506200010 | 3.30 % | — | — |
| 7506200090 | 3.30 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506200500 | 3% | Free (17 programs) | ["kg"] |
| 750620 | — | — | — |
| 7506201000 | 3% | Free (17 programs) | ["kg"] |
| 7506203000 | 2.5% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7506.20?
Imports of Of nickel alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 750620 cover?
This subheading covers flat-rolled products of nickel alloys, including sheets, strips, and plates. According to the World Customs Organization's Harmonized System Nomenclature, Chapter 75 pertains to nickel and articles thereof. Specifically, HS 7506.20, as interpreted by official sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, encompasses these forms when they are manufactured from nickel alloys, which are mixtures of nickel with other elements to enhance specific properties like strength or corrosion resistance.
What falls outside HS 750620?
The following products are excluded from HS 750620: pure nickel flat-rolled products (classified under HS 7506.10), nickel powders (HS 7504.00), nickel bars, rods, and profiles (HS 7505.22), and nickel wire (HS 7505.22). Also excluded are articles of nickel alloys that are further manufactured, such as stamped or pressed articles, or those that have undergone significant fabrication beyond simple shaping into flat-rolled forms, which would be classified based on their final form and function.
What are common classification mistakes for HS 750620?
A common error is misinterpreting the "alloy" requirement. Importers may incorrectly classify pure nickel flat-rolled products under HS 7506.20. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the heading and any relative section or chapter notes. It is crucial to verify the composition of the nickel product to ensure it meets the definition of an alloy, typically containing more than 50% nickel by weight, before assigning it to this subheading.
How should importers classify products under HS 750620?
The correct procedure for classifying products under HS 750620 involves a multi-step process. First, determine if the product is a flat-rolled form of nickel (sheet, strip, or plate). Second, confirm that the material is a nickel alloy, meaning it is a mixture of nickel with other metals or non-metals. Reviewing the product's technical specifications and material certificates is essential. Consult official tariff databases like the USITC HTS or EU TARIC for specific interpretations and any applicable notes.
How is the duty calculated for products under HS 750620?
A shipment of 1,000 kilograms of Inconel 625 alloy sheets, declared at a customs value of $25,000 USD, would attract a US duty of $1,250. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, as published in the USITC Harmonized Tariff Schedule (HTS) for HS code 7506.20.0000 (5.0% × $25,000 = $1,250). It is important to note that specific alloy compositions may have different tariff classifications or rates.
Which trade agreements reduce duties for HS 750620?
Several free trade agreements may reduce the applicable duty rate for HS 750620, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating nickel alloy flat-rolled products from Canada or Mexico can enter the United States duty-free. To claim this preference, a valid self-certified origin statement is required. Additionally, certain developing countries may benefit from the Generalized System of Preferences (GSP), potentially offering reduced or duty-free entry into the US, requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 7506.20 (Of nickel alloys)?
The import duty rates for HS code 7506.20, which covers articles of nickel alloys, vary significantly by importing country. For instance, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) duty rate is 3.30% ad valorem. However, preferential rates under various Free Trade Agreements (FTAs) can reduce or eliminate this duty. For example, goods originating from Australia (AU), Chile (CL), or South Korea (KR) may enter the US duty-free under specific FTA provisions. It is crucial to consult the latest tariff schedule of the destination country and verify the country of origin to determine the applicable duty rate. The World Customs Organization (WCO) provides the foundational HS nomenclature, which national customs authorities adapt.
How is the import duty for HS code 7506.20 calculated, and can you provide an example?
The import duty for HS code 7506.20 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 3.30% and you import nickel alloy articles valued at $10,000 USD, the import duty would be calculated as: $10,000 (value) × 3.30% (duty rate) = $330 USD. Always ensure your customs valuation is accurate and supported by proper documentation, such as commercial invoices and bills of lading, as required by the importing country's customs authority.
What specific criteria define 'nickel alloys' under HS code 7506.20?
HS code 7506.20 specifically applies to articles made from nickel alloys. A nickel alloy is defined as a metal substance having a greater proportion, by weight, of nickel than of any other single metal. For classification purposes, it is essential to have a breakdown of the material composition, often provided by the manufacturer's certificate of analysis or material safety data sheet (MSDS). This documentation helps confirm that the primary metallic component by weight is indeed nickel, distinguishing it from other nickel-based materials or pure nickel articles classified under different headings.
Which trade agreements commonly offer preferential duty rates for HS code 7506.20 into the United States?
Several trade agreements can provide preferential duty rates for HS code 7506.20 into the United States. These include agreements with countries like Australia (AU), Bahrain (BH), Chile (CL), South Korea (KR), and others listed under the 'Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)' preferential rate. To claim preferential treatment, importers must ensure the goods meet the rules of origin stipulated in the respective trade agreement and possess a valid Certificate of Origin or other acceptable proof of origin documentation as required by US Customs and Border Protection (CBP).
What documentation is typically required for importing articles classified under HS code 7506.20?
When importing articles classified under HS code 7506.20, standard import documentation is generally required, including a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to substantiate the classification as a 'nickel alloy,' a certificate of analysis (CoA) or similar technical documentation from the manufacturer is often necessary. This document should clearly state the composition of the alloy, confirming that nickel is the predominant metal by weight. If claiming preferential duty rates under a Free Trade Agreement, a valid Certificate of Origin specific to that agreement is also mandatory.