HS 750610 Of nickel, not alloyed
Quick Answer: Nickel, not alloyed, imported under HS 750610 enters the UK at 0.00%, the EU at 0.00%, and the US at 2.5% ad valorem under the Most Favored Nation (MFN) rate, with certain preferential agreements allowing for duty-free entry. This HS code specifically covers articles of nickel, not alloyed, such as bars, rods, profiles, wire, plates, sheets, strip, foil, powder, and flakes. Importers should be aware of the varying US duty rates based on the country of origin. According to CustomTariffs data, understanding these jurisdictional differences is crucial for accurate duty assessment and cost management in international trade.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506100000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506100000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7506100500 | 2.5% | Free (17 programs) | ["kg"] |
| 750610 | — | — | — |
| 7506101000 | 3% | Free (17 programs) | ["kg"] |
| 7506103000 | 2.5% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7506.10?
Imports of Of nickel, not alloyed may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 750610 cover?
This subheading covers flat-rolled products of nickel, not alloyed, specifically those with a thickness exceeding 0.15 mm but not exceeding 6 mm. According to the World Customs Organization's Harmonized System Nomenclature, this includes sheets, strip, and plates of unalloyed nickel. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these are essentially pure nickel in a flattened form, excluding those with added alloying elements.
What falls outside HS 750610?
The following products are excluded from HS 750610: nickel in other forms such as wire, bars, rods, or tubes; nickel powders; and nickel products that are alloyed, meaning they contain other metals or non-metals to impart specific properties. For instance, nickel-copper alloys (like Monel) would be classified under heading 7505, and nickel clad with other metals would fall under different headings depending on the primary material or composite structure, as per General Rule of Interpretation 1.
What are common classification mistakes for HS 750610?
A common error is the misclassification of nickel alloys as unalloyed nickel. Importers may overlook the presence of even small amounts of alloying elements that, by definition, would place the product in a different HS code, typically under heading 7505 or 7508. Another mistake involves confusing the thickness specifications; products thinner than 0.15 mm or thicker than 6 mm would not fall under this specific subheading, and General Rule of Interpretation 3 may be relevant for composite goods.
How should importers classify products under HS 750610?
The correct procedure for classifying products under HS 750610 involves a thorough examination of the material composition and physical form. Importers and customs brokers must verify that the product is indeed nickel and not an alloy, and confirm its dimensions (thickness between 0.15 mm and 6 mm). Consulting the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing explanatory notes from the WCO are crucial steps to ensure accurate classification.
How is the duty calculated for products under HS 750610?
A 100 kg shipment of pure nickel sheets, measuring 2 mm in thickness and declared at a customs value of $1,500 USD, would attract a US duty of $45.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the customs value ($1,500 USD × 0.03 = $45.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 7506.10.00.
Which trade agreements reduce duties for HS 750610?
Several free trade agreements may reduce the applicable duty rate for HS 750610, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating nickel products can enter the US duty-free. To claim this preference, a valid Certificate of Origin or a self-certified origin statement is required, depending on the specific requirements of US Customs and Border Protection. Canada and Mexico are the primary beneficiaries of this preferential rate for this product category.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 750610 (Of nickel, not alloyed)?
The Most Favored Nation (MFN) duty rate for HS code 750610 is 2.5% ad valorem. However, preferential duty rates are available under various trade agreements. For example, under the US Free Trade Agreement with Australia (AU), the rate is Free. Importers should consult the specific trade agreement applicable to their country of origin to determine the correct duty rate. Always verify current rates with official sources like the USITC Harmonized Tariff Schedule, EU TARIC, or UK Trade Tariff.
How is the duty for HS code 750610 calculated, and can you provide an example?
The duty for HS code 750610 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if the MFN duty rate is 2.5% and you import nickel plates (falling under 750610) valued at $10,000, the duty would be calculated as: $10,000 (value) × 0.025 (duty rate) = $250. If specific duties apply (e.g., per kilogram), the calculation would be rate per unit × quantity. Always ensure your customs value is accurately declared according to customs regulations.
What are the key classification criteria for goods under HS code 750610?
HS code 750610 covers 'Of nickel, not alloyed' in the form of plates, sheets, strip and foil. The primary classification criterion is that the material must be nickel that is not alloyed. An alloy is defined by the WCO as a metallic material composed of two or more elements, at least one of which is a metal, and where the resulting mixture has metallic characteristics. Therefore, pure nickel in the specified forms falls under this code, while nickel with other elements added to impart specific properties would be classified elsewhere, likely under HS code 7506.20 for alloyed nickel.
What documentation is typically required for importing goods classified under HS code 750610?
For imports under HS code 750610, standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, importers must provide a declaration or certificate of origin to substantiate any claims for preferential duty rates under trade agreements. For nickel products, depending on the importing country's regulations, additional certifications regarding purity or origin of the metal might be requested by customs authorities to verify compliance with classification and trade agreement requirements.
Which common trade agreements offer preferential duty rates for HS code 750610?
Several trade agreements provide preferential duty rates, often resulting in Free (0.00%) entry for HS code 750610. Examples include agreements between the US and countries like Australia (AU), South Korea (KR), and Chile (CL), as well as agreements within blocs like ASEAN (represented by SG) and various bilateral agreements. The provided sample duty rates indicate 'Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)', suggesting broad coverage under agreements with these listed countries or economic zones. Importers must confirm eligibility and specific requirements for each agreement, such as rules of origin, to benefit from these reduced or eliminated duties.