HS 750511 Bars, rods and profiles
Quick Answer: Nickel and articles thereof, specifically bars, rods, and profiles, imported under HS 750511 enter the UK at 0.00%, the EU at 0.00%, and the US with a Most Favored Nation (MFN) rate of 3.00%, though preferential rates may apply for certain trading partners. This classification covers solid, non-hollow products of nickel or nickel alloys that have been shaped by extrusion, drawing, or rolling into uniform cross-sectional forms such as round bars, square rods, or L-shaped profiles. Importers should verify specific preferential duty rates available for their origin country in the US. CustomTariffs aggregates this tariff information for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7505110000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7505110000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 750511 | — | — | — |
| 7505111000 | 3% | Free (17 programs) | ["kg"] |
| 7505113000 | 2.6% | Free (17 programs) | ["kg"] |
| 7505115000 | 3% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7505.11?
Imports of Bars, rods and profiles may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 750511 cover?
This subheading covers bars, rods, and profiles of nickel and articles thereof, specifically those that are not further worked than drawn or extruded. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category includes products with a solid cross-section, produced by drawing or extruding nickel or nickel alloys. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database align with this definition, specifying that these items are characterized by their uniform cross-sectional shape along their entire length and are typically used in manufacturing and construction.
What falls outside HS 750511?
The following products are excluded from HS 750511: nickel and articles thereof that have undergone further working, such as machining, bending, or welding, which would alter their fundamental shape or form beyond simple drawing or extrusion. For instance, nickel pipes and tubes, which have hollow cross-sections, are classified under HS 7504. Similarly, nickel wire, which has a circular cross-section and is typically produced by drawing, falls under HS 750512. Articles that are assembled or fabricated from bars, rods, or profiles are also excluded.
What are common classification mistakes for HS 750511?
A common error is misclassifying nickel products that have undergone minor surface treatments or simple bending as falling under HS 750511. According to General Rule of Interpretation (GRI) 1 of the Harmonized System, classification is determined by the terms of the headings and any relative section or chapter notes. If a product has been subjected to operations beyond simple drawing or extrusion, such as cutting to specific lengths with finished ends or being part of a more complex assembly, it may need to be classified under a more specific heading or subheading that accounts for these additional processes.
How should importers classify products under HS 750511?
The correct procedure for classifying products under HS 750511 involves a thorough examination of the product's physical characteristics and manufacturing process. Importers and customs brokers must verify that the nickel article has a solid cross-section and has been produced solely by drawing or extruding, without further significant working. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the EU TARIC, and reviewing explanatory notes from the WCO are crucial steps to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 750511?
A shipment of 1,000 kilograms of nickel alloy rods, declared at a customs value of $15,000 USD, would attract a US duty of $1,500. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS code 750511. The calculation is: 10% of $15,000 USD = $1,500 USD. This rate applies to goods imported from countries not benefiting from preferential trade agreements.
Which trade agreements reduce duties for HS 750511?
Several free trade agreements may reduce the applicable duty rate for HS 750511, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating nickel bars, rods, and profiles from Canada and Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement is typically required. Additionally, preferential rates may be available for goods originating from countries that are beneficiaries of the US Generalized System of Preferences (GSP), requiring a GSP Form A to document origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 750511 (Nickel bars, rods, and profiles)?
The Most Favored Nation (MFN) duty rate for HS code 750511 is 3.5% ad valorem. However, preferential duty rates are available under various trade agreements. For example, under the US-Australia Free Trade Agreement, the rate is Free. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment based on the origin of the goods and the applicable trade agreement.
How is HS code 750511 defined, and what are the classification criteria for bars, rods, and profiles made of nickel?
HS code 750511 covers nickel bars, rods, and profiles. 'Bars' are generally solid products with a uniform cross-section throughout their length, having a shape of circles, ovals, rectangles (including squares), or regular convex or concave moldings. 'Rods' are similar to bars but typically have a circular cross-section. 'Profiles' are products with a cross-sectional shape that is not uniform or is more complex than that of bars or rods, such as I-beams or H-beams, but still maintain a constant cross-section along their length. The material must be predominantly nickel.
What documentation is typically required for importing goods classified under HS code 750511?
Standard documentation for importing nickel bars, rods, and profiles (HS 750511) includes a commercial invoice, packing list, bill of lading or air waybill, and a certificate of origin. Depending on the importing country and the specific trade agreement being utilized, a declaration of origin or proof of preferential origin may be required to claim reduced or free duty rates. Importers should also be prepared for potential requests for technical specifications or material composition certificates to verify classification.
Which common trade agreements offer preferential duty rates for HS code 750511, and how can importers benefit?
Several trade agreements may offer preferential duty rates for HS code 750511. For instance, agreements like the US-Australia Free Trade Agreement (AU), US-Korea Free Trade Agreement (KR), and various others with countries such as Chile (CL), Colombia (CO), and Singapore (SG) often provide duty-free or reduced-duty access. To benefit, importers must ensure the goods meet the rules of origin stipulated in the specific agreement and possess the correct documentation (e.g., Certificate of Origin) to substantiate the claim at the time of import.
Can you provide a concrete example of how import duty is calculated for HS code 750511?
Let's assume an importer is bringing 1,000 kilograms of nickel rods into a country with a 3.5% ad valorem MFN duty rate. If the declared value of these rods is $20,000 USD, the duty calculation would be: Duty Amount = Value × Duty Rate. In this case, Duty Amount = $20,000 USD × 3.5% = $700 USD. If the country also had a specific duty component (e.g., $0.50 per kg), the calculation would be Value-based duty + Quantity-based duty = $700 USD + (1,000 kg × $0.50/kg) = $700 USD + $500 USD = $1,200 USD. Always verify if the duty is purely ad valorem or includes specific components.