HS 741539 Other
Quick Answer: Articles of copper and articles thereof, not elsewhere specified or included, under HS 741539, enter the UK at 0.00%, the EU at 3.00% ad valorem, and the US at a variable rate of 3% ad valorem, with duty-free entry for certain preferential trade partners and a 45% ad valorem rate for others. This residual classification applies to copper fasteners and similar articles not specifically covered by more precise headings within Chapter 74, such as screws, bolts, nuts, and rivets made of copper or its alloys. Importers should verify specific product composition and origin to determine the applicable duty rate, as CustomTariffs data highlights significant variations across major trading blocs.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415390000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415390000 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415390000 | 3% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7415.39?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 741539 cover?
This subheading covers other articles of copper, not threaded or otherwise worked, such as copper nails, tacks, and similar articles, not otherwise specified under heading 7415. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and the USITC Harmonized Tariff Schedule (HTS), this category is for copper fasteners that do not fit into more specific subheadings within 7415, provided they are not threaded. The EU TARIC system also aligns with this broad interpretation for "other" copper articles of this nature.
What falls outside HS 741539?
The following products are excluded from HS 741539: copper nails, tacks, staples, and similar articles that are threaded or otherwise worked, as well as copper screws and bolts. For instance, copper screws with distinct threads are classified under 7415.10, and copper bolts would fall under a more specific classification if available. Articles of copper wire, even if used as fasteners, are generally classified elsewhere, typically in Chapter 72 or 74 depending on the specific form and processing.
What are common classification mistakes for HS 741539?
A common error is misclassifying threaded copper fasteners or copper screws and bolts under this subheading. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. If a product is specifically described in another heading or subheading, it should be classified there. For example, threaded copper fasteners are specifically provided for in subheading 7415.10.
How should importers classify products under HS 741539?
The correct procedure for classifying products under HS 741539 involves a thorough examination of the article's physical characteristics and intended use. Importers and customs brokers must first determine if the article is made of copper and if it functions as a nail, tack, or similar fastener. Crucially, they must verify that the article is not threaded or otherwise specifically provided for in a more precise subheading within heading 7415, such as 7415.10.
How is the duty calculated for products under HS 741539?
A shipment of 10,000 copper tacks weighing 5 kilograms and declared at a customs value of $150.00 USD would attract a US duty of $0.75. This is calculated using the USITC Harmonized Tariff Schedule's Most Favored Nation (MFN) rate of 1.5% ad valorem, applied to the declared value ($150.00 USD × 0.015 = $2.25). However, if the tacks were classified under a per-unit duty, for example, $0.00015 per tack, the duty would be $1.50 (10,000 tacks × $0.00015/tack). For this example, we will use the ad valorem rate.
Which trade agreements reduce duties for HS 741539?
Several free trade agreements may reduce the applicable duty rate for HS 741539. For example, under the United States-Mexico-Canada Agreement (USMCA), originating copper articles may be admitted duty-free. Similarly, the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) could offer preferential rates for originating goods from countries like Vietnam. To claim these preferences, a valid USMCA certification or a CPTPP Certificate of Origin is typically required, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 741539?
HS code 741539 covers 'Other' articles of iron or steel, threaded or threaded and tapped, made of copper or copper alloys. The Most Favored Nation (MFN) duty rate is typically 3.00% ad valorem. However, preferential rates may apply under various trade agreements. For example, under the US-Australia Free Trade Agreement (AU), the duty rate is Free. Importers should always consult the latest tariff schedule for the importing country to confirm applicable rates.
How is the duty calculated for HS code 741539?
The duty for HS code 741539 is generally calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a shipment of copper screws classified under 741539 has a customs value of $10,000 and the MFN duty rate is 3.00%, the calculated duty would be $10,000 \times 0.03 = $300.00. Some countries may also apply specific duties based on weight or other units, so it's crucial to verify the duty calculation method.
What are the classification criteria for HS code 741539?
HS code 741539 is a residual category for copper or copper alloy fasteners (screws, bolts, nuts, etc.) that are threaded or tapped but do not fall under more specific subheadings within Chapter 74. To be classified here, the article must primarily be made of copper or its alloys. If the article is made of iron or steel and is threaded or tapped, it would fall under HS code 7318. It's essential to analyze the material composition and the specific form of the fastener to ensure correct classification.
Which trade agreements offer preferential duty rates for HS code 741539?
Several trade agreements can provide preferential duty rates for goods classified under HS code 741539. For example, the United States has Free Trade Agreements (FTAs) with countries like Australia (AU), Bahrain (BH), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), Morocco (MA), Oman (OM), Panama (PA), Peru (PE), and Singapore (SG), which often grant duty-free entry for eligible goods. The EU has agreements with various partners, and the UK has its own set of trade deals. Importers should verify the specific origin of their goods and consult the relevant trade agreement annexes or tariff databases (like the USITC, EU TARIC, or UK Trade Tariff) to confirm eligibility and applicable preferential rates.
What documentation is typically required for importing goods under HS code 741539?
Standard import documentation is generally required for HS code 741539, including a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, a certificate of origin may be necessary to claim preferential duty rates under a trade agreement. For goods originating from countries with specific quality or safety standards, additional certifications or declarations might be requested by customs authorities. It is advisable for importers and customs brokers to consult the specific import regulations of the destination country.