HS 741533 Other threaded articles
Quick Answer: Other threaded articles of copper, falling under HS code 741533, enter the UK duty-free, the EU at 3.00% ad valorem, and the US with rates varying significantly, including Free for certain trade partners and up to 45% ad valorem under the Most Favored Nation (MFN) rate. This classification encompasses threaded items such as screws, bolts, and nuts made from copper or copper alloys, excluding those specifically enumerated in other headings. Importers should consult specific country tariff schedules, as detailed on platforms like CustomTariffs, to ascertain the precise duty applicable based on origin and trade agreements. Accurate classification is crucial to avoid delays and ensure compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415330000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415330000 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415330500 | 3% | Free (18 programs) | ["kg"] |
| 741533 | — | — | — |
| 7415331000 | 1.4% | Free (18 programs) | ["kg"] |
| 7415338010 | — | — | ["kg"] |
| 74153380 | 3% | Free (18 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7415.33?
Imports of Other threaded articles may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 741533 cover?
This subheading covers other threaded articles of copper, specifically those that are not screws or bolts. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this includes items like threaded rods, threaded studs, and other copper fasteners with external or internal threads that do not fit the more specific definitions of screws or bolts. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC system align with this broad interpretation, focusing on threaded copper items not otherwise specified.
What falls outside HS 741533?
The following products are excluded from HS 741533: copper screws and bolts (classified under HS 741510 and 741520, respectively), unthreaded copper articles, and copper articles that are primarily functional for purposes other than fastening, such as copper wire or copper tubing. For instance, copper nails, even if threaded, would typically fall under a different classification if they are not considered screws or bolts. Articles made of copper alloys where copper is not the principal constituent by weight are also excluded.
What are common classification mistakes for HS 741533?
A common error is misinterpreting the distinction between "other threaded articles" and specific categories like screws or bolts. General Interpretive Rule 1 (GIR 1) of the Harmonized System dictates that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. Importers may incorrectly classify a copper threaded rod as a bolt if it is used in a similar manner, overlooking the precise definitions within the HS nomenclature, which can lead to incorrect duty rates.
How should importers classify products under HS 741533?
The correct procedure for classifying products under HS 741533 involves a thorough examination of the product's physical characteristics and intended use. Importers and customs brokers should consult the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and cross-reference with the WCO HS Explanatory Notes. It is crucial to determine if the item is indeed threaded, made predominantly of copper, and not specifically covered by a more precise heading or subheading, such as screws or bolts.
How is the duty calculated for products under HS 741533?
A shipment of 1,000 copper threaded rods, each weighing 50 grams (totaling 50 kg), declared at a customs value of $200 USD, would attract a US duty of $10.00. This is calculated using the Most Favored Nation (MFN) duty rate of 2.0% ad valorem, applied to the declared value ($200 USD × 0.02 = $4.00), and an additional specific duty of $0.10 per kilogram ($0.10/kg × 50 kg = $5.00), resulting in a total duty of $9.00. This calculation is based on the USITC Harmonized Tariff Schedule, specifically heading 7415.33.9000.
Which trade agreements reduce duties for HS 741533?
Several free trade agreements may reduce the applicable duty rate for HS 741533, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating copper threaded articles from Canada or Mexico can enter the United States duty-free. To claim this preference, a valid USMCA certification of origin is required. Additionally, preferential rates may be available for originating goods from countries benefiting from the Generalized System of Preferences (GSP) in certain jurisdictions, often requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the standard import duty rate for HS code 741533, and are there preferential rates available?
The standard Most Favored Nation (MFN) duty rate for HS code 741533, which covers 'Other threaded articles, of copper', is typically 3.00% ad valorem. However, preferential duty rates are available for imports from countries with trade agreements with the importing nation. For example, under certain trade agreements (e.g., with countries designated as A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG), the duty rate can be Free (0.00%). Importers should always verify the specific preferential rate applicable to their country of origin and the prevailing trade agreement.
How is the duty for HS code 741533 calculated, and can you provide an example?
The duty for HS code 741533 is generally calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if the MFN duty rate is 3.00% and an importer declares goods valued at $10,000 USD, the duty would be calculated as: $10,000 (Value) × 0.03 (Duty Rate) = $300 USD. If the duty were calculated on a specific basis (e.g., per unit), the calculation would involve the quantity of goods. Always confirm the basis of duty calculation (ad valorem, specific, or compound) with the relevant customs authority.
What are the key classification criteria for goods falling under HS code 741533?
HS code 741533 specifically covers 'Other threaded articles, of copper'. This means the articles must be made primarily of copper or copper alloys. The 'threaded' aspect is crucial, indicating the presence of external or internal screw threads designed for fastening or mechanical purposes. This code excludes items like screws, bolts, nuts, and washers, which have their own specific HS codes within Chapter 74. Therefore, classification under 741533 requires the article to be threaded and made of copper, but not be a standard fastener like a screw or bolt.
What documentation is typically required for importing goods classified under HS code 741533?
When importing goods under HS code 741533, standard import documentation is generally required. This typically includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin, especially if claiming preferential duty rates. Depending on the importing country and the specific nature of the copper articles, additional certifications or permits related to material composition, safety standards, or environmental regulations might be necessary. It is advisable to consult the customs regulations of the destination country and work closely with a customs broker.
Which common trade agreements might offer reduced or free duty rates for HS code 741533?
Several trade agreements can impact the duty rates for HS code 741533. For example, agreements like the United States-Mexico-Canada Agreement (USMCA), various Free Trade Agreements (FTAs) the EU has with third countries, and the UK's Global Tariff regime, which incorporates numerous preferential arrangements, often provide reduced or zero duty rates for goods originating from partner countries. The specific preferential rates depend on the origin of the goods and the terms of the applicable trade agreement. Importers should consult resources like the USITC's Harmonized Tariff Schedule, the EU's TARIC database, or the UK Trade Tariff to identify applicable preferential rates based on the country of origin.