HS 741529 Other
Quick Answer: Nails, tacks, drawing pins, staples and similar articles of copper, not elsewhere specified or included, imported under HS 741529 enter the UK at 0.00%, the EU at 3.00% ad valorem, and the US at a rate of 3% ad valorem, with certain preferential trade agreements offering duty-free entry. This residual classification applies to copper fasteners and similar items that do not fit into more specific headings within Chapter 74. Importers should verify specific country-of-origin requirements and any applicable trade agreements to ensure accurate duty assessment. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415290000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415290000 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415290000 | 3% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7415.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 741529 cover?
This subheading covers "other" articles of copper and articles thereof, not elsewhere specified within heading 7415. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, heading 7415 encompasses nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper, and base metal parts of machines, of iron or steel. Subheading 741529 specifically captures those items within this heading that do not fit into the more specific categories of heading 7415, such as those made entirely of copper and not otherwise classified. For instance, this could include certain specialized copper fasteners or fittings not covered by more precise descriptions.
What falls outside HS 741529?
The following products are excluded from HS 741529: articles of copper specifically enumerated in other headings of the Nomenclature, such as screws, bolts, nuts, and similar threaded articles (typically classified under 7415.10), or staples of heading 8305. Additionally, finished articles of copper that are primarily functional or decorative and not considered fasteners or parts of machines, such as copper jewelry or decorative hardware, would be classified elsewhere. For example, copper wire not used as a fastener would fall under a different chapter.
What are common classification mistakes for HS 741529?
A common error is misinterpreting the scope of "other" within this subheading, leading to the incorrect classification of items that should be placed in more specific subheadings of 7415 or even in entirely different headings. For instance, mistaking a copper screw for a general "other" article would be incorrect. Importers may also fail to consider the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. If a product has a more specific description in another heading, it should be classified there.
How should importers classify products under HS 741529?
The correct procedure for classifying products under HS 741529 involves a thorough examination of the product's material composition, form, and intended use, comparing it against the descriptive text of heading 7415 and its subheadings, as well as the WCO Explanatory Notes. Importers and customs brokers must first determine if the article is indeed made of copper or has a copper head and is a type of fastener or similar article. If it is not a screw, bolt, nut, or staple, and not otherwise specified in heading 7415, then 741529 is the appropriate classification. Consulting official tariff databases like the USITC HTS or EU TARIC is crucial for definitive guidance.
How is the duty calculated for products under HS 741529?
A shipment of 1,000 kilograms of copper tacks, not elsewhere specified, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3% ad valorem, applied to the declared value. The calculation is: 3% of $5,000 USD = $150.00. This rate is published in the USITC Harmonized Tariff Schedule of the United States (HTSUS) under subheading 7415.29.0000. It is important to note that specific quantities might also have specific duties in some jurisdictions.
Which trade agreements reduce duties for HS 741529?
Several free trade agreements may reduce the applicable duty rate for HS 741529, including the United States-Mexico-Canada Agreement (USMCA), which can provide for duty-free entry for qualifying originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or duty-free rates for eligible goods from developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific requirements of the importing country's customs authority.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 741529, specifically for shipments to the United States?
For shipments to the United States, the Most Favored Nation (MFN) duty rate for HS code 741529 is 3.5% ad valorem. This means the duty is calculated as a percentage of the declared value of the goods. For example, if goods valued at $10,000 are imported, the duty would be $10,000 \times 3.5% = $350.00. Always consult the latest Harmonized Tariff Schedule of the United States (HTSUS) published by the USITC for definitive rates, as these can change.
What are the classification criteria for items falling under HS code 741529?
HS code 741529 covers 'Other' articles of iron or steel, copper or copper alloy, in nails, tacks, drawing pins, etc. This code is a residual category. Items are classified here if they are made of copper or copper alloys and resemble nails, tacks, or drawing pins but do not meet the specific criteria of more precise subheadings within 7415. This typically includes items that are not specifically enumerated elsewhere in the chapter and are not fasteners like screws or bolts. For precise classification, refer to the Explanatory Notes of the Harmonized System (HS) provided by the World Customs Organization (WCO).
Which trade agreements offer preferential duty rates for HS code 741529 into the European Union?
The European Union's TARIC database indicates that preferential duty rates for HS code 741529 are available under various trade agreements. For instance, goods originating from countries like Albania (AL), Bosnia and Herzegovina (BA), Chile (CL), Egypt (EG), and others may benefit from reduced or zero duty rates. The specific preferential rate depends on the country of origin and the existence of a valid trade agreement. Importers must ensure they have the necessary proof of origin to claim these preferential rates. Always verify the current TARIC codes and applicable agreements for your specific origin country.
What documentation is typically required for importing goods classified under HS code 741529 into the United Kingdom?
When importing goods under HS code 741529 into the United Kingdom, standard customs documentation is required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, for preferential duty rates under trade agreements (e.g., the UK-EU Trade and Cooperation Agreement), a proof of origin, such as an origin declaration or certificate, is mandatory. Consult the UK Trade Tariff for the most up-to-date import requirements and potential specific documentation needs based on the country of origin.
How are duties calculated for HS 741529 if a specific preferential rate is not applicable, using the 3.00% MFN rate as an example?
If a preferential duty rate is not applicable, the standard Most Favored Nation (MFN) rate is used. For example, if the MFN duty rate is 3.00% ad valorem and you import goods valued at $5,000, the duty calculation would be: $5,000 (value) \times 3.00% = $150.00. If the tariff also specifies a specific duty (e.g., $0.10 per kilogram), you would calculate both and pay the higher amount, or as specified by the tariff. Always refer to the official tariff schedule of the importing country for the exact duty calculation method.